Shopping Cart

Your cart is empty.

Your cart is empty.

Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable, LED Warning Light Indicators

Free shipping on orders over $29.99

$68.00

$ 31 .99 $31.99

In Stock

1.Size:1 Pack


About this item

  • 24/7 Self-testing components are always checking the device to ensure it's operating as expected (not a substitute for a manual push test)
  • Easy installation mounting bracket included for quick installation in 4 orientations
  • Photoelectric sensor detects visible fire particles associated with slow, smoldering fires, while the electrochemical sensor detects carbon monoxide
  • 85-decibel alarm & LED warning indicators alert you to various status: green = normal operation, amber = operating error, and red = smoke, fire or carbon monoxide event
  • Battery operated to provide reliable detection, even during power outages; two AA batteries included
  • UL Listed with a 10-Year limited manufacturer warranty on the alarm only (not a battery performance claim). Warranty begins when the alarm is powered on. If that date is unknown, it should be assumed that replacement is needed.


Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable, LED Warning Light Indicators, model 900-CUAR, is an alarm combo that detects smoke & carbon monoxide gas, using a single alarm. Operating through your home's wiring (120V AC power), while 2-AA batteries (included) provide battery backup during the event of a power failure, the Kidde Smoke and Carbon Monoxide Alarm is equipped with self-testing components that are always checking the unit to ensure the device is operating as expected*. Photoelectric sensing technology that senses visible fire particles (associated with smoldering fires), while an electrochemical sensor detects carbon monoxide. When a smoke, fire, or carbon monoxide event occurs, the Kidde fire alarm warns with an 85-decibel alarm sound & flashing red LEDs. Three LED warning lights provide status of the alarm: a green status alerts to the alarm operating properly, amber alerts to faulty operation or connection, and red alerts to smoke, fire, or carbon monoxide. The Smart-Hush button silences the unit for approximately 8 minutes, which is helpful when this smoke detector carbon monoxide detector combo sounds from things like routine cooking or shower steam. Install a carbon monoxide smoke detector combo on every level of your home and near bedrooms to help keep your family safe. UL Certified with a 10-year limited manufacturer's warranty. Meets requirements of UL 2034, UL217, NFPA72, (chapter 11 2002 edition) The State of California Fire Marshal, NFPA101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). *Self-testing is not a substitute for a manual push test of the alarm. Perform a button test once per week to verify proper alarm operation. **Alarms only connect with select Kidde alarms that have hardwired AC interconnect capability (see User Guide).


Lily Adams
Reviewed in the United States on March 7, 2025
Gives us a piece of mind on either side of our house. We gotten three so far, one after a couple of months just starting beeping randomly and very loud at random times in the middle of the night, couldn’t figure out what was wrong with it, we tried everything but it just basically malfunctioned. No issues so far with the other ones.
Customer
Reviewed in the United States on March 15, 2025
Easy to install and worked great for a while 2 years and 2.5 mths. Then the end of life beeping began. We thought it was batteries so we put brand new ones in. Nope. It was the end of life beep. I paid $70 for a combo alarm that lasted just over 2 years. I will never purchase this brand again.
Bernard J. Wise
Reviewed in the United States on February 12, 2025
This was a quick replacement for my older smoke detector. This brand is top quality and I feel very secure with this
reefguy
Reviewed in the United States on September 1, 2024
I replaced my existing old smoke detectors with these. Installing the wire harness and the bracket was super easy. The wires are color coded - Black (Power), White (Neutral) & Red (Interconnect). The alarm easily secures into the circular bracket. On the plus side, I liked the fact that the detector uses 2 AA Batteries for standby power instead of the typical 9V batteries found in typical smoke alarms. The only minor drawback, for me, is that battery compartment is located on the backside of the unit. This means that one will need to unscrew / remove the unit from its base in order to replace the batteries. Although, I suppose it's not really that big of a big deal. I mixed these dual sensor unit with the same brand standard smoke detector and found that the interconnectivity works.
David and Shelley
Reviewed in the United States on August 14, 2024
Only allowed 30 days. Broke on day 32. 2 Fire trucks later-The fire department says it’s defective. Kidde wants to troubleshoot. This is a potentially life saving device. Our $50.00 could have just as well been put in the shredder. Awful product!UPDATE: The seller is replacing our unit. The customer service was well done. Changed rating from 1 ⭐️ to a possible 4 ⭐️ ⭐️ ⭐️ ⭐️
Jason B
Reviewed in the United States on July 3, 2024
When we purchased our home it did no have any gas appliances so did not have any carbon monoxide detectors installed in the home. Fast forward to the next winter we upgraded our HVAC system to a gas furnace so wanted to ensure our home and family was protected from the dangers of potential gas leaks.When choosing an detector I wanted to make sure that it was hard wired in with our entire house as well as have a detector that had a smoke detector as well. After researching different brands I found that I liked the reviews on the Kidde Hardwired Smoke & Carbon Monoxide Detector the best as it also had the AA battery backup.Coming from public safety a backup is always preferred as living in more rural areas seconds and minutes count to get out and get to safety.After turning off the breaker and testing to make sure power was off to the detector circuit, Installation was a breeze with the provided instructions and only took a few minutes to install once the old detector was disconnected. I made sure that the battery was also good before connecting it to the power as well. Once the new Kidde Hardwired Smoke & Carbon Monoxide Detector's were all installed I made my way through the house and tested each one. If your detectors are all connected I love that when one is alerting, they all alert to warn the entire house of the danger.After using for a few months now I will definitely purchase Kidde detectors in the future if needed. The value of safety is priceless but the cost of the detectors is well worth the listing.Be sure to always change your detector batteries once a year!!
Ed & Beth
Reviewed in the United States on July 27, 2024
The house is a bit more than 8 years old and has a bunch of these detectors. They still function perfectly, but someone thought it good business and got the law changed to force replacement of these detectors by starting a never ending beep. The choice is to replace a still working unit with another one, or toss it and go without. The plug did not match, so I had to wire the new one into the wire nuts, seems like an unnecessary step too. The new alarm now works without beeping. Reminds me of the seat belts in 1974 cars that prevented you from starting the car, even to go down your private drive to the mailbox, easily cured with a bit of rewiring under the seat. I suspect many will go without a smoke detector because of this 8 year replacement "feature".
Jeff P
Reviewed in the United States on December 24, 2023
I was replacing two very old BRK hard wired units, and my HVAC company owner friend highly recommended these Kidde units. These are the combo CO/Smoke units that are hard wired, with a battery backup. The only minor issue is there are no wire nuts as part of the package, but I reused the existing wire nuts from the units being replaced, plus I had many on-hand. The units installed very easily and the backing plate had all fastener options (holes) to connect to the electrical box.Note if you do have older units in place that connect with the "3rd wire", all existing units needed to be removed prior to starting to replace them. If you leave any in place, all the units will sound off during the install, which is a bit disconcerting. Kidde support confirmed that all older units need to be removed prior to installing the first one. Overall I give these a 5/5.
Recommended Products

$47.64

$ 24 .99 $24.99

5.0
Select Option

$71.99

$ 32 .99 $32.99

4.6
Select Option