Your cart is empty.
Your cart is empty.Product Description
Xekazrop kitchen sink soap dispenser, say goodbye to frequent refills
Features:
Easy To Pump: 2.76" nozzle reaches over the sink, the self priming pump head can swivel 360 degrees for full access.
No More Refills: The dish soap dispenser for kitchen sink comes with 47”extension tube kits, you can connect it with your large volume dish soap container, which means less refilling operation in the future.
Premium Quality material: The pump head is made of high quality 304 stainless steel, which is rust proof and resist-water stains, fading and fingerprints.
Product Dimensions:
Overall height ( on the tabletop): 2.36”
Spout length: 2.76 "
Diameter of base: 1.57 "
Length of the threaded shaft: 2.68 "
Package Contents:
1 soap dispenser pump head
2 extension tubes, total length is 47"
3 different size container stoppers
1 check valve (Already assembled between the 2 tubes)
1 white PP ball
3 fastening bolts
Multifunction Use
This dish soap dispensers is suitable for dish soap, liquid soap, hand soap, lotion or detergent. It's an good helper in kitchen and bathroom sink.
Comes with thicken 2.67 inches threaded, this kitchen sink soap dispenser fits most countertops (Granite, Stainless Steel, Wood), durable and not easy to break. Inclued with 2 rubber washers on both sides, you don't have to worry about countertop water leaking.
ATTENTION:
1. This sink soap dispenser fits 1 to 1.52 inch diameter sink holes.
2. The thickness of your sink countertop do not exceed 2.3 inches.
3. Remember to check your installation condition before purchasing.
Before Installtion:
Max countertop thickness: 2.3 "
Countertop hole size: 1'-1.52"
What you need：no tools needed (just takes you a few minutes)
3 kinds of Bottle Stoppers:
Suitable for most size of container necks: 3 kinds of bottle stoppers fit almost all soap bottles ( Bottle necks diameter: 0.65--1.42 inch ).
Food-Grade Silicone Hose
Check Valve: Keep the soap always primed
Sticky Holder: Hold the tube on the wall, no more messy tubes in your cabinet
How to install:
1. Remove the locknut, leaving washer on the threaded flange.
2. Insert the longer tube end of pump tube into the dispenser pump, and attach the short tube side into the your dish soap container.
3. Make sure the washer is centered beneath flange through the hole on the countertop.
Attention:
1. There is an upward-pointing arrow on the surface of the check valve, which means the direction of the soap flowing.
2. The longer side of the extension tube is supposed to be attached on the dispenser pump head.
Customer
Reviewed in the United States on March 5, 2025
This was simple to install and works great so far!
beaunerrific
Reviewed in the United States on March 19, 2025
This deal is for just the pump part. You will need to figure out a soap container and how you're going to attach it under the sink. I'm not impressed. It's like they did half the job. It seemed like too good of a deal but, that's why
Reynard L
Reviewed in the United States on March 15, 2025
Good soap dispenser! The fact that is uses a hose means you can use it with larger bottles so you don't have to refill as often (plus it's often cheaper to buy soap in larger quantities). the hose is long enough to get the job done and it does what it needs to! Overall a pretty good dispenser
Bullet
Reviewed in the United States on February 15, 2025
The Xekazrop kitchen sink dish soap dispenser was ordered to replace a dispenser that was very difficult to fill. Our old dispenser bottle could not be reached in the cabinet under the sink since it was positioned up under the sink, right behind the garbage disposal. In order to fill it you needed to remove the pump and stem from the top and pour detergent into the bottle beneath the sink from the hole left by the pump. This became a messy and time consuming job. The bottle was only about a pint and it required filling frequently.This problem was completely resolved using the Xekazrop dispenser with its long feed tube and check valve. The included soap bottle adapter fit a very large bottle of soap purchased at a local wearhouse store, after many pumps of the dispenser it began to draw in the soap and once primed, performed perfectly. I can now take advantage of the large volume pricing and not have to worry about filling that silly old bottle.The appearance and fit of the brushed stainless steel components is more than adequate and it goes well with my Stainless steel sink. It takes around two pumps of the dispenser to do a full sink of dishes.I would recommend this item.
Rsscully
Reviewed in the United States on February 15, 2025
My old dispenser unfortunately broke. An original replacement was just far more than I wanted to spend. I came across this dispenser and decided to try it. First let me say it works very well and actually dispensed more soap per pump than my old one, which always kind of annoyed me. Installation was pretty straight forward. I like that the tube that drops down into the some container is weighted so it will stay on the bottom. They also provided a stopper with a hole for the soap tube that fits my particular jugs of soap perfectly.I do however have a few gripes about this product. First, the styling is very basic. The look and finish on this are no where near as pleasing to look at. The second thing I wasn't quite happy with is that the base of this dispenser is just barely large enough to cover the hole in my sink. This is kind of concerning as the gasket is barely making contact with the sink. I may have to run a bead of clear silicone around it to keep splashes from dripping under the sink into the cabinet.
Joe
Reviewed in the United States on February 10, 2025
The soap dispenser arrived well-packaged, with all the components in good condition. The matte black pump has a solid feel, and the finish looks great next to my matching sink faucet. The 47” extension tube is a game-changer and allows me to connect directly to a large soap container under the sink, keeping everything looking nice and neat.Installation was straightforward and took just a few minutes. The dispenser fits securely on my countertop, with no leaks without needing any sealant. The pump action is smooth and dispenses just the right amount of soap with each press.Functionality-wise, it works as expected and handles soap without clogging. I appreciate that it can be used for dish soap, hand soap, or even lotion. If I had to nitpick, the tube could be a bit more rigid to prevent bending inside the soap container and pinch off the soap, but that’s an easy fix by adjusting its placement.Overall, this is a solid upgrade from the standard soap dispensers that require constant refilling. If you’re tired of dealing with small refill bottles and you have the available hole in your sink, this is a great solution.
DAN
Reviewed in the United States on December 19, 2024
It’s a ok product does what it says but it’s plastic. Will see how long it lasts
G3 P.
Reviewed in the United States on December 17, 2024
The dispenser works beautifully and the installation was very easy. The only con is that the lid provided doesn’t fit securely on the Costco sized dish detergent bottles. Hoping it will last a while.
Recommended Products