Your cart is empty.
Your cart is empty.Product Description
Florent
Reviewed in France on February 5, 2025
Les dissipateur Sabrent sont certes plus cher que d'autres mais respirent la qualité.Attention cependant si comme moi vous disposez d'un système de fixation rapide (Ici une MSI PRO X870), c'est très léger pour le maintient.Préférez dans ce cas remplacer par des entretoises + vis adaptées à votre carte mère: Exemple: vis M3 pour du MSI (ça peut être M2 pour d'autres constructeurs)Ces SSD secondaires sont ainsi bien mieux refroidis que mon système, qui se trouve sous le shield de la carte mère.
Violet McClain
Reviewed in the United States on January 29, 2025
Great heatsick and it runs super smoothly
User
Reviewed in the United States on August 4, 2024
If your looking for a low profile heatsink to fit in a small/medium sized NAS this is it. Only thing is, buy a small amount of high quality thermal paste(I recommend thermal grizzly it's the top rated and best in market you only need a small amount and spread eveningly). Remove the top sticky heat dissipation pad(very slowly with a knife so it doesn't rip. Apply the paste to the cracks and gaps going to the copper coils, do not spread it over the entire bottom unit just to fill the gaps by the coils) then re-apply the pad.. this will make this thing even better performing than the manufacturer spec. I did extensive heat testing and this thing works wonders. And will protect the now high over priced nvme add on the market ensuring long life and durability 👍
WarTech
Reviewed in the United States on May 3, 2024
This cooler does work very well. The design is a little high, which is fine for some of the drives I have but if you have a slot near your video card like I do this will not fit there, so I had to go with a shallower heat sink. However, this design where it does fit works VERY well. My Sabrent NVME drives a few degrees cooler than they did with other coolers in the same location. I would recommend this to anyone to protect your drives.
Kenneth Ketchum
Reviewed in the United States on February 6, 2024
I got these thinking that I could possibly use them on my PS5 but they were just too high they look really cool though especially this color. They would be definitely good looking in a computer built where you're building your own computer and you can use this because there's no space constraint and from when I saw they do give good thermal Cooling the price was kind of high but being that they are really good quality it wasn't too bad I guess for the price. Overall I would recommend them if you are doing a computer built.
Gianluca
Reviewed in Italy on August 8, 2023
Preso per montarlo su Samsung 980 Pro PCIe 4.0, in quanto soggetta a calo di prestazioni conl'aumentare della temperatura. Montaggio semplice, pad termoconduttivi nella confezione, ottima sensazione di robustezza, dimensioni perfette soprattutto in larghezza (spesso l'unità m.2 cade tra due slot o vicinissima ad altri componenti della mobo. E, che non guasta, anche bello da vedere.
Jesus
Reviewed in Spain on August 7, 2023
Este disipador cumple con su cometido, para mí es uno de los mejores disipadores, relación, calidad, precio. Lo compré para una SSD Crucial P5 Plus 2TB Gen4 NVMe, que en el ordenador, a pleno rendimiento, alcanzaba los 51°-52° y me bajaba el rendimiento, ahora con este nuevo disipador, después de haber probado con varios, he conseguido bajar a pleno rendimiento 10° así que ahora no supera los 41° y su rendimiento no baja, si lo que queréis es un disipador que regule la temperatura de buestra ssd, os aconsejo este, aunque su precio superé los 25€ yo lo aconsejo y he probado varios que no me han dado la tranquilidad que este me a dado
Alberto
Reviewed in Spain on March 5, 2023
Me ha gustado la terminación del producto,se ve de calidad y su uso,baja enormemente la temperatura del SSD M2.Ahora bien,los thermal pad que trae los he cambiado por unos que había comprado para una gráfica de mejor calidad y se nota el aumento de eficacia.Por ello ,mi consejo,para Sabrent y los clientes que lo compren es que pongan thermal pasa de mejor calidad.
Wiwik
Reviewed in the United States on November 18, 2023
Conclusion: Very pretty and works well with at least some airflow, but you can find something similar for much cheaper.Pros:- Looks great- Lots of thermal mass (works well with a decent amount of airflow)- Packaging & instructions were surprisingly high qualityCons:- Low surface area (bad for areas with less airflow)- Expensive
porican
Reviewed in the United States on March 22, 2022
The cooler works. Dropped temps 10 degrees celsius from the generic copper heatsink I had been using.Construction is solid, included thermal pads are of high quality and work with both one and two-sided blades.But the gap between the screw notch and a standard card's screw slot is too large. neither the included screw nor the one that came with my card (Ableconn PEXM2 130) was long enough. I got it to work by compressing it and screwing it in at an angle, but it's not very secure and has likely damaged the board's screw slot (though those are replaceable). It should either come with a longer screw, or at least have a couple options.It's also extremely tall and definitely blocks the PCIe slot above it, but I knew that going in and was able to work around it.All in all, good cooler, BYO screws. For $25 they should probably sort the screw problem though, check the reviews, I do not appear to be alone in this.
GutZ
Reviewed in the United States on December 27, 2022
The install was very simple, comes with a small screw driver so even if you somehow didn't have your own set that fit for these screws,they at least provide the means to finish the job. Make sure you read the instructions carefully to make sure you are installing your NVMe correctly, as they include a spacer thermal pad in case your unit isn't quite thick enough to fill in the space.For my needs, I bought a 2TB NVMe for my PS5, but I wasn't too thrilled with the cooling potential of some of the heatsinks shown that I was recommended to fit in the PS5. I found this heatsink that looked more than adequate at moving heat away from the chip, and searched to see if anyone else had used it on their PS5 setup. I found 1 other person that had, and they informed in the review that the metal shield plate that goes over the NVMe would not be able to be installed with this heatsink, but the plastic PS5 side panels would install just fine.He also noted that there was no issues in thermal performance because of this, and I can confirm.If I wanted to absolutely put the metal plate back on, I would find a lower profile heatsink to install for the PS5, but I wanted better thermal control, and this thing is beefy, well equipt to move heat away from the board as I wished.
Xyberbat
Reviewed in the Netherlands on October 22, 2022
Geïnstalleerd op een WD SN850 2TB nVME, gemonteerd op MSI x570 moederbord (staat bekend as heethoofd). Onder normale gebruik blijft de temperatuur laag (40 °C max).
Chris
Reviewed in the United States on October 1, 2021
If you're looking at this product with anything in mind other than using it with the Sabrent rocket, WD SN850 or the Samsung 980 then I wouldn't spend my money on it. This heat sync is amazing, it works well, easy to get the SSD set up properly and looks super cool. But for the most part, M.2 drives don't need heat syncs. I purchased the WD SN850 because currently, it is one of the fastest if not the fastest M.2 drive avalbo. It's only downside: It gets really hot.Same thing with a handful of other blazing fast M.2 drives.So conclusion: this product performs perfectly for a very small fraction of the PC building community, but unless you're getting an M.2 drive that has known overheating issues, it's not necessary.
Recommended Products
$13.49
$ 6 .99 $6.99