Shopping Cart

Your cart is empty.

Your cart is empty.

3/8 Fuel Line Hose 6AN 20FT PTFE Teflon E85 Ethanol Fuel Injection line Braided Stainless Steel EFI LS for All Oil Gas Fuel fuel Lube Alcohol Ethanol Coolant Black

Free shipping on orders over $29.99

$42.89

$ 20 .99 $20.99

In Stock

1.Size:4an-20ft


About this item

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃).
  • ➰SIZE- length=20 feet. Inner diameter=0.32 inches (8.13 mm). Outer diameter=0.43 inches (10.92 mm).
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber; middle layer: 304 stainless steel wire mesh sleeve; outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended.



Product Description

4an 6an 8an 10an 12an fuel line hose 10ft 20ft nylon braided cptfe 1/3 1/2 3/8 5/8 3/4

YIUIY 4AN 6AN 8AN 10AN 12AN (1/3", 3/8", 1/2", 5/8", 3/4")-10FT/20FT Braided Nylon Stainless Steel PTFE Fuel Line Hose

Description:

PTFE fuel lines are more resistant to high temperature and pressure.

PTFE hoses are relatively hard and cannot be bent or folded in half.

Material:

Outer layer: High quality braided nylon

Middle layer: 304 stainless steel wire mesh sleeve

Inner layer: PTFE (Teflon) synthetic rubber

Package includes:

PTFE Nylon Braided Fuel Line Hose *1 (NO fittings included)

PTFE FUEL LINE vs CPE  FUEL LINE

Special Note

  • We launched an investigation due to a number of customer reports that the tubing was the wrong size. In the end we found out that it was due to using the wrong fitting, so please be sure to read the picture above carefully before using it.

Application

Application

  • All fuel, lube, alcohol, ethanol, coolant and so on.
  • Be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.
  • Fit for E85
  • Only work with PTFE fittings!

widely useful

All Kinds of Automotive

  • You could use it for your car, motorcycle, marine, mower, and all kinds of automotive, just need to choose the right size of your machine.

factory

Factory Outlet

  • Rich production experience, perfect quality control, quality is guaranteed.
note

Note

  • It is not recommended to install in a corrosive environment.
  • Professional installation is recommended.

Michael Sharpe
Reviewed in the United States on February 22, 2025
Works for what I need
Mike staples
Reviewed in the United States on February 21, 2025
Very good line no leaks and looks good in your engine bay.
Customer
Reviewed in the United States on April 24, 2024
Plastic lines, brittle, tears easy and can’t be bent at all
Houston
Reviewed in the United States on February 14, 2023
The line showed up KINKED just like others have said in multiple places. Product feels cheap, will be returning and going with Evil Energy. They are the only ones that I’ve had good quality product come from. Another Amazon brand sent me PTFE hose with the incorrect fittings to use.
Customer
Reviewed in the United States on November 23, 2023
While I was cutting tha zip ties off the end installed for shipping, while pulling on the tie I not only crushed but also kinked the hose making a couple of inches useless. I would not even try to use this hose for a garden hose.
Kevin
Reviewed in the United States on April 16, 2023
Quick shipping and product was exactly as described. I used it for my air ride setup and even tho some of my cuts weren't straight, I had no leaks outta the gate. Would definitely recommend. I used evil energy fittings as well
James Robert Brock
Reviewed in the United States on June 15, 2022
Ordered 3/8 inside demention and got 3/8 outside demention. Hose seem a great quality, just can't use it for what I was working on.
Customer
Reviewed in the United States on November 8, 2022
Good product and great price.