Your cart is empty.
Your cart is empty.Product Description
PTFE Fuel Line
Compare
8AN | Size | 1/2" |
YES | Compatible with E85 | NO |
1500PSI | Working Pressure | 217PSI-300PSI |
4500PSI | Burst Pressure | 1160PSI |
-76°F to 446°F | Temperature Range | -40°F to 257°F |
101.6mm | Min Bending Radius | 120mm |
8AN | Size | 8AN |
YES | Compatible with E85 | NO |
1500PSI | Working Pressure | 750PSI |
4500PSI | Burst Pressure | 2250PSI |
-76°F to 446°F | Temperature Range | -40°F to 257°F |
101.6mm | Min Bending Radius | 88.9mm |
- NBR Fuel Line
- CPE Fuel Line
-
-
Marine Fuel Hose
Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine.
-
Transmission Oil Cooler Hose
Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine.
-
NBR Rubber Fuel Hose Line
Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc.
-
Fuel Injection Hose
Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc.
-
PTFE Hose End Fitting
Only work with PTFE fuel line. Designed by 360° swivel for easy assembly.
mark murl
Reviewed in the United States on March 21, 2025
Quality and durability is higher than expected.
Stacy A.
Reviewed in the United States on January 24, 2025
I used this kit to add a fuel regulator to my project vechicle. It was easy to use and I have had no leaks since installing.
Customer
Reviewed in the United States on January 20, 2025
They were great about returning when I ordered the non ptfe line by accident and I have not used any of it yet but it looks good quality. Will edit if I have any issues
A Kaiser
Reviewed in the United States on December 24, 2024
I use a lot of evil energy parts, specifically the ptfe fittings. The PTFR tubing and fittings work great -- and I think the PTFE fittings are more reliably installed than their rubber counterparts. I must have used at least 60 feet of the AN6 tube already -- it is great.
Jay
Reviewed in the United States on December 24, 2024
I have these in a few cars now and so far no issues at all.Some of the fittings sometimes aren't perfect but from a price perspective great valueand they do the job very well. I havent had any leaks or issues from them and they are pretty easy to work with. I would recommend them especially when you need ptfe for e85 applications
Truckosauris
Reviewed in the United States on December 10, 2024
I'm building a custom fuel system for my Corvette. The fittings are nicely made and seat nicely on their male counterparts, the hose is easy to work with and trim, and the ends are easy to put on. My fuel pressure is set at 60Psi and no leaks so far
Recommended Products