Shopping Cart

Your cart is empty.

Your cart is empty.

AN10 Transmission Cooler Hose - 10AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Clutch, Power Steering, Oiling, Hydraulic And Vacuum Applications (10 FT)

4.6 (8) Write Review
Free shipping on orders over $29.99

$28.99

$ 13 .99 $13.99

In Stock

1.Size:4an 10ft


About this item

  • ⭐PREMIUM MATERIAL◀The 10an transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 0.035 inches.
  • ⭐BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 10AN inch diameter helps in better flow and intake of fuel. This 10an braided hose ensures that the car engine is able to process the fuel in the best possible state. The 10an fuel line comes as a roll of 10 feet long enough for a wide range of applications.
  • ⭐QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance.
  • ⭐BENDABLE ◀The 10an transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves.
  • ⭐WIDE APPLICATION ◀ The 10an fuel line is specially designed to be compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.


Product Description

The main reason for leaking fuel lines in metal is corrosion, thus needing replacement after a while.

5/8 heater hose 10an hose 5/8 hose upr 5/8 hose 9/16 fuel line 5/8 power steering hose

This hose is a perfect choice.

It features a lightweight nylon fiber outer braid with a CPE inner liner and a maximum pressure rating of 350 psi.

3/8 high pressure fuel line 3/8 oil cooler hose 3/8 fuel injection hose 3/8 fuel hose

3/8 high pressure fuel line 3/8 oil cooler hose 3/8 fuel injection hose 3/8 fuel hose
FEATURES:

  • Features a wall thickness of 35mm
  • Can easily bend with your hand
  • A large diameter eliminates duel starvation
  • It enables more fuel flow
  • Compatible with vehicles needing large tube diameters

The best part is that this fuel line gives you clean bends without kinking.

Product Description:

  • Size: AN10
  • Length:3 Meter / 10 ft
  • Inner hose: CPE synthetic rubber
  • The middle layer: 304 stainless steel wire mesh sleeve
  • The outer layer: High-quality Nylon Braided
  • Maximum Working Pressure (psi): 350 psi
  • Bursting Pressure(psi): 1400psi
  • Hose Inner Diameter: 14.22mm (0.56 inch)
  • Hose Outside Diameter: 20.06mm (0.79 inch)
  • Operating temperature: -104ºF to +302 ºF/-40ºC to +150ºC

HOW TO INSTALL

3/8 transmission cooler hose transmission cooler hose 3/8 3/8 transmission cooler hose

DISCOVER MORE DETAILS!

transmission cooler hose 3/8 marine fuel line 3/8 fuel line hose 3/8 fuel hose

STEEL & NYLON BRAIDED

Premium CPE synthetic rubber tube, wrapped with stainless steel nylon braided outside surface, durable to use, and can avoid carefulness hurting your finger.

3/8 fuel injection hose 3/8 fuel hose transmission cooler hose 3/8 marine fuel line

HEAT & PRESSURE RESIST

Constructed with a seamless extruded rubber tube as a liner, it has excellent resistance to heat, pressure, and bending, resilient in folding and compressing. Working temp:-104ºF to +302 ºF/-40ºC to +150ºC

3/8 transmission cooler hose transmission cooler hose 3/8 3/8 braided hose 3/8 fuel line

WIDE APPLICATION

The 6an fuel line is specially designed to be compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.


J. Wynn
Reviewed in the United States on June 30, 2024
Other than being really thin fins this cooler when mounted in front of radiator at a 15 degree angle lowered the transmission temperature by almost 70 degree's from 208 to 138 without a trailer.
Lester
Reviewed in the United States on August 16, 2023
Heavy duty! Will work!
Brent R.
Reviewed in the United States on May 24, 2023
Have used this hose on a few applications, never any issues
Cole
Reviewed in the United States on March 29, 2023
I was surprised with the high quality of this hose. It’s more rigid than the EVIL ENERGY hose hat I previously bought, which is good. On the EE hose I could crush the hose easily which is concerning. This hose is more firm but still bends and cuts well.
Scizzorhands
Reviewed in the United States on March 2, 2023
The product looks good. But i ordered 1/2” not1/4”. Guess that what happens when you ordered from the cheaper priced one
Vitruvianz
Reviewed in the United States on February 1, 2023
This appears to be a quality product and looks like the OEM hoses. I used 1/2" (-8AN) hose for two oil air separators.
J Hunt
Reviewed in the United States on November 13, 2023
Easy to use works just as good as the top name brand hoses
dan60231
Reviewed in the United States on April 30, 2023
I like how flexible it is over braided stainless hose. Much easier to install fittings onto. Looks very nice when installed.