Your cart is empty.
Your cart is empty.Product Description
CPE Fuel Line
Compare
6AN | Size | 3/8" |
NO | Compatible with E85 | NO |
750PSI | Working Pressure | 300PSI |
2250PSI | Burst Pressure | 1160PSI |
-40°F to 257°F | Temperature Range | -40°F to 257°F |
63.5mm | Min Bending Radius | 100mm |
6AN | Size | 6AN |
NO | Compatible with E85 | YES |
750PSI | Working Pressure | 1500PSI |
2250PSI | Burst Pressure | 4500PSI |
-40°F to 257°F | Temperature Range | -76°F to 446°F |
63.5mm | Min Bending Radius | 88.9mm |
- NBR Fuel Line
- PTFE Fuel Line
-
-
Marine Fuel Hose
Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine.
-
Transmission Oil Cooler Hose
Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine.
-
NBR Rubber Fuel Hose Line
Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc.
-
Fuel Injection Hose
Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc.
-
Swivel Hose End Fitting
The swivel fitting is working with nylon braided and stainless steel fuel hose.
Rodney Cusiac
Reviewed in Canada on July 18, 2024
Not too bad quality
Jordan
Reviewed in Canada on June 8, 2024
I've purchased alot of evil energy products and never had one issue, unfortunately I ordered this kit three times and every box showed up had missing about half of the fittings from the photo's, make sure to check the box to see if it has everything that should be included.
Chris Henderson
Reviewed in the United States on June 13, 2024
Good for what I needed
Customer
Reviewed in the United States on March 26, 2024
Evil energy is great product at fraction of big race brand pricing.
KBY11348
Reviewed in the United States on November 16, 2024
The media could not be loaded.
Shawn Mihalovits
Reviewed in the United States on September 15, 2021
I put together about 20 lines between multiple kits. These lines worked well for over 3 months with no leaks. Do not over tighten them and you will be good to go.
Customer
Reviewed in the United States on January 12, 2021
Ordered the 4AN kit... simple to assemble and they even include install instructions on how to build the lines. Easy peasy and they look great!
Nelson413
Reviewed in the United States on March 9, 2020
Work great. No leaks. Very easy to use. Compared to ktuned fittings and quality is not as good but still close. Would buy again.
Terrall P.
Reviewed in the United States on February 19, 2020
I like the quality and finish. I will be making my hoses and installing them on my plane this weekend!
Bob
Reviewed in the United States on January 10, 2020
I'm a mechanic that uses a n fittings all the time these hoses are great. If you follow the directions you should be fine. I pressure tested mine to 100 PSI with nitrogen with no problems whatsoever.
Recommended Products