This works well for switching my Xbox Series X and gaming machine (3080) between my TV and ultra wide monitor. It also works well with a fiber optic HDMI cable I am using for the long run to my TV. A little expensive but well worth it if you swap between inputs and outputs a lot

I tried other HDMI switches and splitters but this OREI 4k HDMI Matrix Switch works flawlessly with my setup. Every other switch or splitter would need to be rebooted often, they just randomly lost video or audio signal, but not this Orei. Plug it in and it works!In my setup I use the Matrix Switch to separate the audio and video, sending the video to a projector via hdmi and the audio to a Sony 5.1 Surround amp via optical cable. I am unable to test at 4k because my components are 1080p, but even with one or two cheap hdmi cables the video is always excellent and the audio is in perfect sync.... and again NO REBOOTS. This one just works.

Gets the job done. Can switch between my work laptop and my PC on dual monitors with ease. Easy to set up.

Funciona perfectamente tengo conectado en el ps5, xbox series X ,pc y nintendo switxh y lo uso para escoger en donde quiero ver el contenido si en la tv o monitor con simplemente aprender un botón.

Build quality is fine it’s worked fine with my blu ray player and cable box out putting to my tv or projector when needed. But I ran into issues with Xbox series x and ps5 often need a power cycle, I gave a number of different hdmi cables a try including optical ones no difference. And while playing gran tourismo picture would for a second of 2 get pixely I’m nit sure how really to describe it.There really is a market for some thing like this I just wished it worked always. It’s worth the price tag as do me it would save me form switching hdmi cables between, my atmos processor, projector and tvmaybe a firmware upgrade will fix these issues

Purchased this Orei, because the cheaper no-name brand I bought was having port problems within weeks. I have good faith in this Orei, I only just hooked it up a day ago because I just received it so I cannot speak for its longevity, but I own a Orei splitter that I’ve had for seven years now and never had one single problem with. This product is well built, solid, a screw lock to the power cord so it cannot be unplugged from the unit by mistake and has an on off button; which I really like because I think that saves wear and tear on the product overtime. It hooked up to my system with not a single problem a very nice remote control that seems to be more powerful than most that come with other brands. As of now I am extremely happy and impressed especially with the solid build of the unit. Only time will tell but as I said my prior Orei purchase seven years ago on another product has been fantastic. I actually would have purchase this over the offbrand that crapped out on me within weeks to months, But I was patiently waiting for a sale price.Had this product just shy of two months, working absolutely Flawless, just like their other product that I purchased many years ago.

I purchased OREI 4x2 hdmi 2.0 matrix switcher from amazon after doing a lot of research on best way to connect multiple devices to older projector and also Sonos beam via HDFury Arcana. This unit allows me to connect to my HTPC, fire TV, DVD player and PS5 without any issues. It comes with remote to easily operate between the devices. It does have a small lag when switching from one device to another, but that is expected. The unit is small and can be mounted on wall. I have it installed in the A/V cabinet. As always, amazon delivered is quickly. I have been running this for over a month without any issues. Overall, i am pleased with this purchase. I’d recommend this product if you are looking for something that works very well with HDFury Arcana.

I purchased the Orei 4x2 HDMI 2.0 Matrix switcher to connect my amazon cube & Playstation 5 to 2 different displays. This my second time purchasing this product. The cable broke on me for the first one. But I am satisfied with the functionality and ease of use to switch different inputs to 2 separate monitors. I recommend buying it.

This works even better than I imagined. It takes a bit of playing around with the switches on the front, but it allows you to switch between consoles on multiple TVs. I have a TV for normal use and one that I use as a computer monitor when I stream that goes through a capture card. It does 4K at 120 Hz with no issues. It does not do Dolby Vision, which one of my TVs can do, but it is still perfect otherwise. I highly recommend this matrix for anyone who wants to do 4K at high frame rates to two different TVs or monitors.

Je l'ai achetée afin de pouvoir switcher 4 entrées HDMI distinctes (une Nintendo Wii, une NVIDIA Shield Pro et les 2 sorties d'un ordinateur dual-screen), indépendamment l'une des autres sur 2 vidéo-projecteurs distincts)=> ça a fonctionné à merveille dès le premier coup et le résultat sortant des 2 vidéo-projecteur en // est superbe :) :)(on peut même avoir la même entrée HDMI sur les 2 sorties HDMI en même temps, cad afficher l'image de seulement une des entrées sur les 2 sorties en même temps, cf. n'importe quelle entrée sur n'importe quelle sortie = c'est une vraie matrice HDMI complête **ET** de bonne qualité)Le top serait de pouvoir faire croire sur l'une des entrées HDMI que la définition maximale en sortie serait la somme des 2 sorties HDMI disponibles, cf. 2 écrans HD en 1920x1080 horizontalement mis l'un à côté de l'autre donnerait du 3840 x 1080 , ou 2 écrans HD mis l'un au dessus de l'autre donneraient 1920 x 2160, mais cela ne semble pas y avoir été prévu :(=> m'enfin bon, il ne faut pas être plus royaliste que le roi : pour son prix d'à peine plus de 100 euros, c'est une bonne matrice HDMI 4K 4 entrées / 2 sorties qui offre un rapport qualité/prix carrément exceptionnelle, en plus d'une simplicité d'utilisation elle aussi exceptionnel, cf. je le recommande très fortement, tant pour son prix que pour ses qualités

Ich habe mir den Matrix Switch gekauft, um einerseits einen HDCP-Bypass machen zu können und über jeweils einen der beiden 3,5 Audio Jack den Ton an das PC Audio System abgreifen zu können.Leider bekommt man kein Bild oder nur manchmal also wirklich glück die Playstation 5 zeigt kein Bild beim Apple TV teilweise nach einigem exponenzieren usw. aber für den Preis ist er nutzlos aber es nicht nur bei diesem Modell so leider, dass kleiner Modell der reine Splitter war ok nur zu wenig Anschlüsse und keine Switch Funktion leider.

I purchased this 4x2 Orei Matrix Switcher because I have recently purchased an Xbox Series X, and my old HDMI switch (5x1) that I had would only support up to 30Hz at 4K. My TV only supports up to 60Hz, so this HDMI switch sounded ideal without spending too much.I have a computer screen nearby my TV to work from home and now we have two Xboxes, so this HDMI switch enables both screens to be used for any of the connected devices. I am very happy with this as before I was having to unplug from one screen to plug into the other which was annoying.My setup (in case anyone is unsure of how to connect up):Output A - Main TVOutput B - Secondary TV (PC Monitor)Input 1 - Blu-ray Player (with 5.1 Surround Sound)Input 2 - Xbox Series X (my Xbox)Input 3 - Xbox Series X (the wife's Xbox)Input 4 - Nintendo SwitchOptical - To the same Blu-ray player in Input 1 optical portIt is worth noting, when only the one Xbox is on and on the main TV, it comes out in 4K but when both screens are on, the quality reverts to that of the lower spec screen (in my case the 1080p computer monitor). If both screens were 4K@60Hz though, I'm sure it would be up to the task.The sound and picture quality live up to the expectations. The only downside to this device is now I only have 4 ports rather than 5, In hindsight Orei do sell a 6x2 Matrix, but the price difference was a fair bit so I didn't go for it. To futureproof maybe that's what I should have done but never mind.The build quality of the unit is very good. It was definitely heavier than I thought it would be and feels good quality. There have been comments that the remote feels cheap, I feel that is a little unjust, it may not be as good as a Samsung or Sony TV remote, but it feels sturdy enough, and you can always change source on the unit itself. The only button lacking on the unit itself is a power button.Overall, I am very happy with this purchase, it is very easy to use and would recommend this one to those unsure of what switch to go for that don't want to break the bank.

Buyer beware on this. If you don't care about HDR, you can probably use it for 4K60 SDR content. But if you do, read on...Here's my test setup:Sony UHD player : UBP-X700 -> OREI hdmi input 1LG UHD player : UBKC90 -> OREI hdmi input 2Projector: JVC DLA X790R -> OREI output A over FIBBR fiber optic cable 32’ (already proven HDR10 worthy in previous direct to Sony UHD tests)AV Receiver: Sony STR-DN840. Optical inputs and hdmi inputs for audio. Does not support HDCP 2.2 which is needed for 4K60 in HDR mode, so I was not expecting the video to pass through. If it did, I would not need a switch like this. In the end, I may have no choice but to upgrade this component, but was trying to avoid the cost.Content:Planet Earth ii, which has HDR10 support as well as DTS-HD 5.1 surround sound. I put disc one into the Sony player, and disc two into the LG for fast switching checks. The disc menu sound track is identical so this was good for audio testing as well.Side note: I also ran some 4K content from DirecTV, but here the OREI handshake failed completely. While this content is not even HDR, the OREI forced this content down to 1080i 60Hz. I don’t understand why this is true. I verified the content on the projector directly so it was confirmed to be in 4K(3840)60 mode with BT.2020 color, and I have the C61K-700 box.As a cable baseline, I started with my Goronya 3:1 switch to demo that BT.2020 and HDR (ST.2084) were intact. I am using wirelogic Sapphire cables rated to 18Gbps. Having recently purchased Zeskit cables rated slightly higher for HDMI2.0b, I also tried those but this did not solve the problems below.OREI Power On:Both input 1 and input 2 appeared fine, on the JVC projector as follows (info):Source: 4K(3840)60Color Space: YUVColorimetry: BT.2020HDR: ST.2084Picture Mode: HDRTo simplify, this is the “good” state, and matches what I get when I just connect the Sony or LG player directly to the JVC. Also, it should be noted that this projector is an e-shifter, not native 4K, but for the purpose of the HDMI handshake, the source should not be able to tell the difference since it is JVC that handles how to reproduce the 4K image.However, I could not get any audio from the optical output while in EDID AUTO or COPY mode. When I switch to STD then audio works, but this setting downgrades my video 1080p which defeats the purpose of using this switch. Maybe there is a firmware fix available? I’ve reached out to OREI directly for support on this.The video colorimetry is compromised when EDID:AUTO is set and the second output is connected to my receiver input. I was able to get audio from hdmi OUTPUT B but it cost me BT.2020 (reverted to BT.709) and HDR went from ST.2084 to SDR. This could be related to using a receiver input that is not HDCP2.2 compatible, but that is also the point of buying this switch - to bypass the receiver for video, while retaining audio. To avoid this discrepancy, I went through a down converter (monoprice 2.2 to 1.4) to achieve any audio at all - without it I get silence. Is there any way to use OUTPUT B as audio without this problem? ARC did not work but maybe I configured it wrong. My projector does not support ARC so the switch would have to handle it by feeding back audio from input 1 or 2 or 3 to my ARC channel from the receiver hdmi input 4 (like a TV would). The video made a brief mention of this.So this unit won’t work for me. Either the optical extract needs to work or the 2nd HDMI output for audio needs to not degrade the video at the same time.I also tested the 3.5mm jack to see if audio was working when ARC mode is disabled, but it didn’t work either.