Your cart is empty.
Your cart is empty.Product Description
When You Just Need It to Work
Coax is deceptively simple! In reality the tolerances and purity of the Conductor, Dielectric, and Shield are critical in making a cable last.
MPD Digital has been manufacturing cables for over 10 years and we stand behind our commitment for the best USA made coax cable assemblies. They Work and Last! Indoor, Outdoor, and Specialty Applications are all supported.
When Communication is Critical
The right cable and manufacturing techniques are Critical when you expect a communications cable to function at 100% of it's Rated Capacity.
MPD Digital Cables are one of the choice for critical communications. Current customers include the US Coast Guard, NOAA, NASA, Police and Fire Departments and the US Army and Marine Corps.
When You Need to Make Contact
Whether you are operating at high power for DX or enjoy the challenge of QRP operation, MPD Digital manufactures a cable assembly to meet your needs.
We have cable assemblies and jumpers that will assure the lowest signal loss at 5 Watts and others that will support power levels up to 15 Kw.
When You Need to Comunicate from Off-Grid
Cable assemblies designed for Maximum Signal, Direct Exposure and Portability are a specialty. Cables are built Tough to handle abrasion and the strain of frequent movement.
MPD Digital manufactures cables for Outdoor, Marine, and portable use. Jumpers and Antenna cables are available for All types of remote communication needs.
The Dude
Reviewed in the United States on September 9, 2024
Pricey but good quality. Overkill for many applications that some folks think they need it for, but necessary for other use cases. You might need thicker stuff like this if:* you want to work with relatively higher frequencies, say above 145MHz. Though 440MHz is still fine so long as your cable length isn't too bad.* have a longer run of cable, say over 50 ft.* plan to use significantly higher transmit power, like if you plan to use a high power external amplifier.*** DO BEWARE OF SIMILAR SOUNDING ALTERNATIVES! If you see other "something such" 400 that is implied to be of the same class as this, understand that it may not be. Especially of considerably cheaper. You might find the shielding is less dense, or instead of high quality copper you end up with copper clad aluminum etc.
Richard C. Bossler Jr.
Reviewed in the United States on January 9, 2024
What I expected. Works great for Ham use.
Gennaro Caputo
Reviewed in the United States on August 19, 2023
If you can afford it, then buy it!
Lisa Bednarchik
Reviewed in the United States on May 18, 2023
Cable improved device performance 500% when compared to device performance with cables provided with device.
W4SGA
Reviewed in the United States on July 5, 2019
Wish I had gotten something a little more flexible. Fine for permanent installs but for packing and going it is a bit much to handle.
Larry Scchrader Customer
Reviewed in the United States on July 28, 2019
This is QUALITY COAX with N Male Connectors.... I am using these large size jumpers to go between my ELECRAFT K3 and my 902 Mhz and 1296 Mhz transverters....then the other set between the Transverters and the Amplifiers for 902 and 1296 and the FINAL set to my Grounded distribution block that supports all the coax cablesthat go to several antennas outdoors...I am an Amateur Radio Operator... Licensed since 1978... Ham Call is NQ8A
iac
Reviewed in the United States on July 17, 2018
This is a great cable. You can't beat LMR for low loss vs cost. I've been testing all types of antennas and cable combinations to extend LTE from a remote area with a weak signal to an even more remote area using Wilson yagis with a ZTE MF279 coupled with Mikrotik SXTsq wireless bridges. Using this LMR400 instead of RG58 for the yagi-to-LTE router link caused a gain of -11 dBi. Don't scrimp on your cable if you need to squeeze out every bit of efficiency.
SP3204
Reviewed in the United States on January 20, 2018
Excellent quality cable and connectors. I used this for an ADS-B antenna and performance is right where it should be for the cable length. The connectors are solidly installed and the shrink tubing over the connectors and cable ends provide a solid physical connection. Still, one should also anchor the cable and not let it hang to prevent any possible separation. Very happy with this purchase and I plan to replace some RG-8 cables with this since the performance will be better at UHF frequencies with the LMR400.
José Luis
Reviewed in Mexico on April 18, 2018
Excelente producto lo instalé y si tiene mejor desempeño que otros cables ahora sólo esperar a la resistencia en la intemperie
Luke
Reviewed in Canada on June 18, 2017
High quality cable at a good price. Actual Times Microwave LMR-400 not another brand or a knockoff cable, which some people like to sell. 10/10 seller
Roger uk
Reviewed in the United Kingdom on January 31, 2014
i wish i had read the reviews before ordering i was led to believe it was times microwave coax ITS NOT !
Recommended Products
$75.99
$ 36 .99 $36.99
$36.10
$ 17 .99 $17.99