Your cart is empty.
Your cart is empty.Product Description
S3000Pro Speaker Stands
The S3000Pro stand is the perfect companion to your new sound system for any home setup. They're a breeze to set up and will improve the look and performance of your speakers in almost any setting.
Hollowed Design
Ready to fill with sand to increase stability and eliminate resonance.
Shock-absorbing Pads
Its shock-absorbing pads protect both the stand and your floor from damage.
Improved Listening Experience
Improves your listening experience by elevating speakers to your ear level.
Hondamoto04
Reviewed in the United States on January 26, 2024
230 bucks is quite a bit for speaker stands most would agree...buttt these are not only made extremely well (its basically furniture) also packaged jus as good...u can tell edifier takes pride in what they produce an..all I can say is TAKE MY MONEY 👍
Reckboy
Reviewed in the United States on September 26, 2023
Excellent stands that work perfectly for my setup. I am using them to hold Bowers and Wilkins 706s3 speakers. Assembling the stands was easy. I took the extra step of using a quality wood glue to seal them seems while screwing on the top and bottom. I also filled the center column with sand so they have a nice hefty dead weight. I used Blue Tack between the speakers and the stand's top plate to mate them firmly. The non-skid feet on the bottom are every so slightly tacky and perfect for my hardwood floor. 3 months of use so far and no problems to report. They have a subtle appearance in my room and are easy to clean to keep them looking new.
Frank
Reviewed in Canada on August 22, 2023
Quality stands for the money. Perfect height for most bookshelf speakers (at least the 2 pairs I currently have), tweeters are at ear level when sitting in most easy chairs. No assembly instructions, so found out the hard way that the top platforms are to be attached to the pillar with the beveled edges down, not up as I had assumed. The screws will protrude above the surface scratching the bottom of the speakers if you attach this way. So I had to unscrew, then reattach to the first stand. I filled the pillars with river stones and now they probably each weigh about 50 lbs, so very stable. Aesthetically, the nicest I've seen on Amazon. No cable management though, although I bi-wire with heavy speaker cables, so I probably wouldn't be able to tuck them into a small opening anyway. Shipping very fast to NL, and the box was quite heavy, fyi.
Jorge Valverde Franco
Reviewed in Mexico on May 3, 2023
EL MATERIA ESTA HECHO DE MDF Y RECUBIERTO CON UN MATERIAL PLASTICO QUE ESEL QUE LE DA EL ACABADO , LO SENTI FRAGIL PORQUE AL PONER LOS TORNILLOS DE SUJECION DE LAS BASES SE ROMPIERON, POR EL PRECIO HUBIERA ESPERADO QUE FUERA DE MADERA, OTRO DETALLE ES QUE NO TIENE MANERA DE CALIBRAR LA BAE SI TUVIERAS IMPERFECCIONES O DESNIVELES EN TU PISO .. POR OTRO LADO SI COMBINA BIEN CON LA BOCINA EDIFIER SP300 PERO PARA SER SINCEROS HUBIERA MEJOR COMPRADO OTRA MARCA QUE FUERA DE MADERA
Scott A
Reviewed in the United States on October 23, 2022
I had to write a review, because this was my 3rd order of speaker stands, and these are exquisite. 1st, they match the Edifier 2000 & 3000 speakers perfectly, but 2nd, they are manufactured from great products, and they just look really really high class.
Frederick E. Endert
Reviewed in the United States on April 12, 2022
These stands had to be 1) solid and 2) beautiful. The Edifier designers achieved #1; the Edifier PACKING designers achieved #2. The components arrived in remarkable and noteworthy packing! This protected the beauty of the veneer on the MDF - assembly was SIMPLE, quick, and all parts present. The upper plate is well suited for my JBL Northridge E30 bookshelf speakers - whose size/weight are fully supported. SOLID and BEAUTIFUL. Superior value!
Cindy Jamroz
Reviewed in the United States on February 13, 2021
They match the speakers perfectly and raise them to a good listening level if you are sitting. They are relatively heavy so we did not need to use any sand to fill the center post. Assembly was very easy, four wood screws on top and four on the bottom. The speakers just sit on the top shelf, they do not fasten down but the setup seems to be quite sturdy. Our cats jump on them and nothing falls.
Thom
Reviewed in the United States on April 5, 2021
Fantastic stands. Rock solid, easy assembling, great look and no damage.
Chris
Reviewed in the United States on August 8, 2020
Very sturdy and solid set of speaker stands. Easy to assemble you need to screw the top and bottom base on, that’s it. A bit of overkill for my current speakers (Apple Home Pods) but they will work great when I get a nice home theatre system. Wife didn’t want to give up any real estate on the credenza for my “stupid speakers” and whatever I bought had to go with the rest of the room. 😆 happy spouse, happy house! Glad she was insistent because I was ready to buy a cheaper pair and after seeing these I know I would have been disappointed with my other option.
Darian
Reviewed in the United States on May 27, 2020
I owned my S3000 Pro's for about 1 year before I got these. They are pretty awesome. They are seriously sexy AF and no picture does them justice. The stands match the speakers perfectly. Like "we cut the stands and the speakers from the same exact tree in the forest" kind of perfect.BUILD:The wood matches perfectly, and they are super well built. Solid AF, heavy AF, just like the speakers. Installation was easy and I have no complaints. Comes well packages, everything you'd expect.DIMENSIONS:Some people are saying the stand isn't wide enough? I think that is a non issue. The speakers are so heavy and well made, they will literally never move 1 mm when playing even at full blast. That is how they were designed. So don't worry about them being wide enough. IMO, they are perfectly wide.COMPLAINTS:My only complaint is these stands do pretty much zero for absorbing vibrations going to the floor. It is wood, screwed to wood. No vibration pad, no rubber, no nothing. (The listing mentions the feet are rubber, but it is super tough and hard.) I can feel the floor under me resonating with the speakers. (I have wood floors for reference).Oh, and also the stands came really dirty. Like wood dust all over them from when they drilled the holes for the pieces you screw in. Open your brand new speaker stands and spend a good 10 minutes cleaning them.All in all though, if you have S3000 pros, buy these hands down. You will love them.PS. No instructions at all come with these. But it is simple enough. Should I fill them with sand or not? I really don't know. I just want to make the best sound I can.
Stephen LeBlanc
Reviewed in Canada on October 24, 2020
Bought these to go with my S3000 Pros. They were very easy to assemble, look amazing and smartly complement my speakers without using up much space. I hear some concerns about sturdiness or size, but I did a controlled "wobble" test and it would take a lot of force to knock these over. Even with the S3000's (which are solid as well) I am not worried about these based on my own test and where I have them placed - that's with two large dogs in the house.
Cam
Reviewed in Australia on September 15, 2019
Goes perfect with the 3000s. Small dot scratches on top but speakers cover them.
Neil W
Reviewed in Australia on November 16, 2019
Speaker stands compliment the speakers placing them at ear height when you are seated.The stands are solid in construction.
Recommended Products