Your cart is empty.
Your cart is empty. The Active PoE Splitter splits a PoE signal into an 12VDC power and 10/100Mbps ethernet data source.
This device allows you to run ethernet cables from a PoE Switch over long distance, and then split the PoE signal into a separate data signal and 12Vdc power sources in order to run an non-PoE devices.
Specifications:
Input: 44-54VDC max ; Shielded RJ-45 female;
Output: 12VDC 1.5A Max. RJ-45 male
DC connector: 5.5*2.1mm
Operating Ambient Temperature: -10 to 45℃
Regulatory IEEE 802.3af
What is included
4 x Active 12v PoE splitter
4 x Waterproof accessory
Trelane Esq
Reviewed in the United States on November 27, 2024
I've bought about 12 of these and they all work.I gave it only 3 stars because the RJ-45 locking clip is BRITTLE and they EASILY break if you have to bend them up a little to catch in the socket.Otherwise, these are great. Haven't had one fail yet (except for the clip).
Jocko Smarts
Reviewed in the United States on October 25, 2024
Works great with my 48vdc POE router. Cameras do not show any noise.
Saporis
Reviewed in the United States on January 1, 2024
These will either just work or they won't. There is no inbetween. Running them at or above 10W for any length of time will shorten their lives significantly. For the most part, these will fail fast (within 24 hours - I have 2 dead as we speak) or last a few years without issue - as long as you keep the wattage low.
tml
Reviewed in the United States on September 6, 2023
I spoke with customer service to verify the specs of my camera and bought a POE switch along with these splitters to turn my cameras into POE cameras. I opened two of the four packages and tested them out- they didn't work. I figured maybe it was user error so I hired an electrician out to come take a look at the cameras and these splitters. He told me they are garbage and couldn't get them to work either. Naturally it took time to get the electrician out here so now it's past the return window and I wasted money. Don't waste your time on these. Would not recommend.
Larry Pierre
Reviewed in the United States on July 11, 2023
Works good for whats made for.
Virginia shoppers
Reviewed in the United States on March 19, 2023
THEY ALL WAYS WORK FOR ME I HAVE NOT GOT A BAD ONE YET
とも
Reviewed in Japan on October 9, 2023
他の屋内用もそうですが、高温多湿の日本ではこれと同じ簡易防水では内部に結露が溜まり、それらが水滴となってPoE線がショートし最悪発火します。高くてもより良い物を利用するか、本体がPoE対応のカメラ等を利用したほうが良いです。海外製IPカメラではよくこのタイプのコネクタが使われていますがPoEには全く使えません。DC接続+LANであれば問題なしのため気密性や日本の高湿度に向かないと判断しました。
みゆき
Reviewed in Japan on January 23, 2021
TP-Link TL-SG1005P に接続し、中華製12V+LANの防犯カメラで使用しています。48V→12Vに変圧しているためある程度熱が発生します。
Json
Reviewed in the United States on March 30, 2020
Awesome, simple, way to add POE to any IP camera.
buchog
Reviewed in the United States on February 15, 2020
I use this to plug my non POE survey cameras to my NVR and they work for my purpose. I am so pleased with product that I decided to re order and converted my wireless cameras to wired connection and powered it thru internet.
Scott Hardy
Reviewed in Canada on November 11, 2020
Works fine and blends in with the camera great will make running the cables much easier as only need the network
Gartenfreund
Reviewed in Germany on April 6, 2020
Funktioniert eine Zeit lang wie erwartet. Nach nunmehr 3 Jahren sind von 3 POE-Splittern leider bereits 2 (=66 %!) ausgefallen! Ein Splitter hat durch Überspannung eine Kamera zerstört (!), ein weiterer POE-Splitter ist vor wenigen Tagen eingegangen. (Liefert keinen Strom mehr an die Kamera). Nach Austausch durch je einen neuen POE-Splitter ist wieder alles OK.ERGÄNZUNG:Heute ist ein dritter POE-Splitter ausgefallen. Liefert ebenfalls keinen Strom mehr! Eine reine Katastrophe! Null Punkte gibt es leider nicht in der Bewertung - schade! Bin bitter enttäuscht!
Barnes
Reviewed in the United Kingdom on April 22, 2020
So I wasn't 100% sure these were going to do what I wanted. I have three "PoE" cameras that came with their own PoE splitter adaptors and PSU to channel THEIR OWN power supply through a network cable. Fair enough, but they didn't work with the PoE Switch I had (at least not using the PoE power it should provide directly. These adaptors add the "smarts" required though and I can now throw the cameras' own PSU and splitter type adaptors into storage! "Plug and play", perfect, many thanks. One minor grumble - the waterproof enclosure provided isn't nearly big enough for my network cables to fit within, so I am having to use silicone sealant in the enclosure (you could alternatively fit a small network plug without sheath).
Recommended Products
