Your cart is empty.
Your cart is empty. How to install a band saw tires
1.Disassemble the wheel from the saw.
2.Remove the old tires and clean any debris and adhesive from the wheel.
3.Try to place a part of tire on the wheel and fix it by spring clamp, and then use another spring clamp to fix the tires on the other side, as symmetrically as you can.
4.Stretching the tire onto the wheel completely. You may need to use a pry tool to help the tire onto the wheel. Be sure to avoid sharp edges. Take down the spring clamps.
5.Even out the stretch. Do this by inserting a round object such as a dowel rod between the tire and the wheel and rotating it around the wheel a couple times.
6.Re-assemble your saw and set it up according to your saw's owner's manual.
A.
Reviewed in the United States on July 9, 2024
Seats on the wheel nicely, reduces the noise. Durable material
Izak Shoshana
Reviewed in the United States on June 23, 2024
It says no adhesive is required. The tier flew off the wheel under a minute and was chewed by the blade.
Jim of Redlands
Reviewed in the United States on June 19, 2024
My bandsaw had a blowout. These were easy enough to install and work great.
Dennis W.
Reviewed in the United States on October 27, 2024
Easy install, great product.
Customer
Reviewed in the United States on April 10, 2024
Went on easily enough if you have hands and can pull stuff-no big deal. however, the slight bump where the band is joined to make it round telegraphed in use to the blade and produces a pulsing sort of movement where the cutting is supposed to be happening. Very irritating, and only acceptable if you are just hacking stuff apart. I have to look for another source for my odd ball sized 16" bandsaw.
Recommended Products