Your cart is empty.
Your cart is empty.Product Description
Handle
L x W x H = 4.8 x 3.1 x 0.6inches.
The handle is made of hard plastic, sturdy and durable.
Handy design.
It has a good grip, feel comfortable.
Easy to install.
If the hole in the handle is bigger than your rope / cord, you can double knotting the string.
Rope
The rope is made of high-strength polyester industrial yarn.
Diameter: 5.0mm.
High-strength polyester weaving, good wear resistance, large bearing capacity.
L = 2.4meters/8.0ft.
Please cut the rope into different lengths according to different needs and the cutting position is recommended to use hot melt treatment.
Paul P
Reviewed in the United States on February 6, 2025
This easy to install handle replaced the original T-handle on my generator. My generator has always required a good bit of grip and force to pull-start. The handle would slip from my grip before the rope was out enough to start the engine; often causing me to scrape my knuckles against the generator cage. I can't believe I didn't replace the handle sooner.
Buford
Reviewed in the United States on February 23, 2025
Works great. Makes a big chainsaw easier to pull with gloves on
Jeff & Pat Brockman
Reviewed in the United States on February 2, 2025
Working greatEasy install
toby
Reviewed in Canada on February 11, 2025
Handle is a little smaller than the original one but works well anyway.
Mike Risher
Reviewed in the United States on January 9, 2025
Great pull handle I have big hands and I can actually put my hand in the handle and not worry about hurting my index and middle finger from kickback. The rope is plenty long I had to cut mine down about 3 ft. Highly recommend going to put this on all my pull start motors!.
Claude landry
Reviewed in Canada on January 28, 2025
Seems to be great quality, works like it should. Only time will tell how long it lasts. I bought the double pack, much better price and also to have a spare one .
metroblazer
Reviewed in the United States on January 20, 2025
Works great
K. Richardson
Reviewed in the United Kingdom on September 1, 2024
I bought a petrol strimmer but was having difficulty gripping the recoil pull handle due to my age and arthritic hands. Easy swap, just make sure you either grip the rope with locking pliers, or pull out a good length of rope and knot it whilst you swap the handle, otherwise there is a danger of losing both the end of the rope and the spring tension of the recoil mechanism. I speak from bitter experience! Removing the recoil mechanism and trying to retension the spring is a challenge in itself. Took me ages to put it right.Having said that, now it’s back together, this handle makes a world of difference to starting my machine. Also ensure you put a big enough knot in the end of the rope where it sits in the handle. I knotted mine through a small nut which I then forced into the cavity in the handle. This will ensure the rope does not pull through the handle in the future.
Bruce
Reviewed in the United States on August 5, 2024
I used it for a different purpose than what it was intended, but it was reliable. Used it to pull a 30 pound metal tube into place as a large windchime. It was strong enough and shaped to be able to use with vise grips on the handle in a reliable manner to free my hands for another part of that lifting process with the attached cord.
MARCHANT christian
Reviewed in France on December 21, 2024
La poignée a cassée rapidement.
Markus Gebhart
Reviewed in Germany on December 10, 2024
Bin sehr zufrieden!
Stephen
Reviewed in the United States on October 24, 2024
Did the job at great price
Monkeysonaspacerock
Reviewed in the United States on October 13, 2024
Used this on an old sea king outboard. Good quality and the large handle really makes spinning the engine over easy.
Recommended Products
$42.95
$ 20 .99 $20.99
$22.95
$ 9 .99 $9.99