Your cart is empty.
Your cart is empty.The Yonico 14705 rabbet router bit set, complete with 6 bearings, will make rabbet cuts in 6 different sizes. Can be used to cut lap joints as well. Rabbet cutting depths are as follows: 1/2", 7/16", 3/8", 5/16", 1/4" & 1/8". 6 Bearing sizes include: 3/8", 1/2", 5/8", 3/4", 7/8" And 1-1/8" With inner diameters of 3/16". Two flute carbide cutters and 1/2" Shank.
DeeM
Reviewed in the United States on June 23, 2024
Purchased this but with high hopes but unfortunately it was a near total failure. I'm am quite familiar with brands like freud, Amana tool, and Whiteside and not had any problems to date with these better known brands. However this bit was so terribly out of balance my 2.5 HP router could not even reach full speed. The bit is however quite sharp and based on appearance it should have worked well. The carbide on the bit is adequate but you're not likely to get more than 1 or 2 shapenings max. The shipping packaging was adequate too. Router bit balance is an absolute must with these larger bits and must be part of quality control before these are shipped to end user. I did reach out to the supplier and am waiting for a reply however this is not really excusable flaw.Edit: the supplier (precisionbits.com) replied in a timely fashion and offered a replacement. Therefore I am changing from 1 to 3 stars to reflect excellent customer support. I did choose to return this to Amazon and go with another brand of rabbeting bit.
kcc
Reviewed in the United States on October 24, 2024
Used to router frame for window requiring a 3/4-inch cut. Smooth and accurate cuts.
Georjean S.
Reviewed in the United States on October 18, 2024
I like these router bits. I have several of them. I am recreational wood worker so these work great for my applications.
Deanna
Reviewed in the United States on October 13, 2024
Yes i will buy again if it gets dull and unusable.
Jonathan
Reviewed in the United Kingdom on January 21, 2023
Used this one cutter to turn enough pallet wood into shiplap to build a 6'x6' shed and it's still super sharp
TSS
Reviewed in the United States on November 25, 2022
Bought this large bit for my handheld Bosch router needed to rabbet 3/4"x1/2" on plywood for cabinet boxes. I first stepped down the cut with a 1/2"x1/2" and the bit worked great at about 18,000 rpm's. The box states that this bit is for "router table use only" so don't try and take a deep rabbet in one pass make several passes by stepping down the depth and it will work fine on a handheld.
Anthony Browne
Reviewed in Canada on June 13, 2021
Good quality and worked great used it on pvc trim very happy with it!
Ronnie Faggart
Reviewed in the United States on April 17, 2021
I needed to make some 3/4 X 3/4 rabbets in a splintery difficult to work wood. This bit cut smoothly and easily. It is not recommended to use in a handheld router but it did just fine in a 2 1/2 HP Bosch plunge router. Slowed the speed down and used a slower feed rate. Comes with bearings to make 1/4 up to 3/4 depth rabbets. Had no problems with any of the bearings as others had indicated in reviews. Carbide cutters are good. thick smooth and sharp.
Ricardo Paredes Juarez
Reviewed in Mexico on December 11, 2019
Ésta es una herramienta fantástica, es muy fácil cambiar los baleros por lo que no se tiene que usar diferentes tipos y tamaños de brocas, con muy buen acabado y el filo que trae está mucho muy bueno....durable y recomendable
Druski
Reviewed in Canada on October 10, 2019
Worked perfectly and the Price was right
MVB
Reviewed in Mexico on April 12, 2019
Recibí el fresador para marcos, muy buena calidad y acabado poco conocida la marca Yonico es la empresa japones, fabricante es hecha China.
Gene
Reviewed in the United States on December 26, 2018
I used this product to make a larger diameter recess on either side of some customer made wooden doors for new door knobs. The old knobs were sticky and ugly so we decided to replace them. The base of the older knobs were about a 1/8 of an inch smaller than the new ones and this bit made increasing the opening easy and they looked good to. They left a nice clean cut on both faces. Great bang for the buck and I have found a couple more uses already. Oh and it came in a nice little case.
K. Miller
Reviewed in the United States on February 26, 2015
Yonico's 14705 Rabbet Router Bit with 6 Bearings is a quality bit for a reasonable price.The bit arrived within five working days of placing my order. The box was well protected in the shipping box.The bit itself, as well as the accompanying holder for the additional bearings were in perfect condition. The bits' cutting surfaces and edges were pristine and sharp. Both the bit and the holder for the additional bearings remained snug in their plastic bit holders. The wooden box, however, was an oddity. Based on other boxes I have purchased from Yonico, I was not expecting a piece of woodworking art; they are basic boxes that successfully do their job of holding and protecting the bits. However, I was surprised by the fact that the latch was installed upside-down. That in itself is not a big deal as I can remove and re-install the latch in seconds. I was surprised to see two additional screw holes in the lid to the left of the latch. It appears as if a worker at the factory started to install a hinge, split the wood (picture attached) and simply installed the hinges on the other side while then subsequently installing the latch (upside down) next to the aborted hinge installation.While I normally rate Yonico bits very high, this particular review gets one star off for quality control...or lack thereof.The bits is about 1 3/8-inches in diameter, so I ran my Bosch 1617EVS mounted in a Bosch RA1171 table at about 22,000 RPM. I ran some test cuts on white pine using three different bearings. All of the cuts were clean (use a backing block to prevent tear-out) and the bearings spun freely and smoothly.I have purchased many Yonico router bits, including the Yonico 17702 70 Bits Set, Yonico 13171 Round Over Edging Router Bit, Yonico 14522 5 Bit Straight/Dado Router Bit Set and many others. All of these bits perform well, cut cleanly and hold up to medium-term usage. Properly set up, used, maintained and stored, Yonico bits are an excellent bargain.
Recommended Products
