Your cart is empty.
Your cart is empty. NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
-Single-row, pre-lubricated, normal accuracy.
-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
-Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
Model: 6202-5/8-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5/8"
Outer Diameter (D): 35mm
Thickness (B): 11mm
Dynamic Load Rating (Cr): 7.65kN
Static Load Rating (Cor): 3.72kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 2 Pcs
Gord
Reviewed in Canada on March 12, 2025
It fit exact to the impeller shaft THANK YOU VERY MUCH
Steve k
Reviewed in the United States on February 23, 2025
Perfect fit. Got my fireplace fan running again.
Nick Lemire
Reviewed in Canada on August 13, 2024
Bought this to repair old Skilsaw. Perfect fit and saw runs like new
Doc832
Reviewed in the United States on July 27, 2024
These bearings were used on a treadmill. What the proper seals being rubber. Due to the dust from the brushes and the motor itself these are high quality bearings that should last for quite a while.
Ruben Murray
Reviewed in the United States on July 11, 2024
Good smooth rollers. Thank You
craig white
Reviewed in the United States on March 1, 2024
Good bearing
Arktasian
Reviewed in Canada on December 3, 2024
As advertised, nice bearings.
DR John
Reviewed in the United States on October 6, 2024
Bought this to replace a shelled out router bit bearing. It's a little thicker than the original but exactly the correct ID and OD. Should last me the life of the bit.
Denis
Reviewed in Canada on November 14, 2023
Tendeur de chaine pour souffleur
Leo R Graywacz
Reviewed in the United States on October 2, 2023
I bought an Amana Cove panel cutter and needed to make some curved panels. The Amana bearing for the panel is 1.9375"OD and $31.00The 2"OD bearing here is $8ea and even with buying both it's half the price. the 1/32" difference in the panel depth doesn't matter with this type of bevel.The 7000 RPM of the shaper was handled by the bearing with ease.
Robert Boswell
Reviewed in Canada on August 10, 2022
I can not attest to the longevity of these bearings but they feel smooth and are the exact size specified
Ronald M..
Reviewed in the United States on February 27, 2022
very happy to find the exact replacement bearings for my older model Craftsman table saw. The standard 6202 are mm sized but these have the 5/8" inside diameter center , for the blade arbor shaft. You can also purchase the 6203 -5/8- 2RS to replace the electric motor bearings on the same saw. This 10" Craftsman contractor cast iron table saw has been with me 30 years and has been a real work horse . Having access to these bearings lets me bring it back to new for many more years. Sears drops most parts after a certain number of years so this was a life saver for me.
Harlan Willis
Reviewed in the United States on October 8, 2022
The diameters of these bearings were perfect as they had to be because of a press fit. Good pricing and very quick delivery.
Recommended Products
