Your cart is empty.
Your cart is empty.Product Description
Sulphur Grove Band Saw Tires
When tuning up your band saw, why not use the best parts to get the job done. Sulphur Grove Tires are designed to last a long time and provide you with outstanding performance without all of the hassle that rubber tires bring.
Choosing the right equipment for your projects plays a significant role in the quality of your work. With band saws it is equally important to choose the right parts and accessories to make your machine run smoothly and without issue. Whether you’re a carpenter, contractor or even a skilled craftsman, your band saw is one machine that you need to run smooth and true. From improved performance and safety to reduced downtime, urethane band saw tires provide many advantages over factory tires and rubber or plastic replacement tires. Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires. Another advantage of urethane tires over rubber is that no adhesive is needed for proper installation. Urethane tires can be stretched to fit and are specifically designed to stay in place without any type of adhesive. This makes these tires even easier to install and even easier to remove if necessary. Whether you’re setting up a new saw or replacing the tires on an old saw, the urethane tire installation process is quicker and easier for increased productivity and efficiency. All of this improves blade tracking and extends the life of your blade. Not only that, the tires are bright orange, which makes them super easy to inspect. This is a two tire set of Quality Urethane Band Saw Tires specifically made for the Delta 28-340, 28-345, 28-34X, 28-350, 28-35X, 28-365, 28-366, 28-36X, 28-640, 28-641, 28-64X, 28-651, 28-652, 28-653, 28-654, 28-656, 28-65X , 28-662, 28-663, 28-665and 28-66X 20″ Band Saws. Also fits Yates J120 band saws. This set replaces 2 of the Delta Part # 426040945002. They are engineered with the same crown profile, thickness, and locking tab (center groove) for a perfect fit. 9/32 (.284) inches thick.
No Compromises
20" x 2 x 9/32" Tire Fits the following machines.
Delta Rockwell:
28-34X, 28-35X, 28-26X, 28-64X, 28-65X, 28-66X
Yates:
J120
Jerry
Reviewed in the United States on June 1, 2024
These belts stretch over time. Photo 1 shows gap at bottom of top wheel while running. Photo 2 stopping. Strange sound while sawing and the tire appears to be “walking” on wheel. No response from company from email inquiry. These tires been on 4 years with occasional use.After second email company responded. They requested I return the belts and they would make shorter. Also do not use warm water when installing. The belts were returned and after installing all is working fine. They were very professional and I am now pleased.
Liliana Hardy
Reviewed in Canada on July 20, 2023
Nous avons placé les 2 courroies dans une scie à ruban, cela fonctionne très bien. Juste que ce n'est pas facile à installer. Produit souple.
DC
Reviewed in the United States on September 8, 2021
Very little (if any) runout.Takes considerable effort to install but this results in a good fit.
Mike
Reviewed in the United States on September 13, 2021
I have installed many Bandsaw tires in my time. I like to restore the larger ones.This is the first time I’ve installed a tire and seen cracking immediately afterwards. These tires are at the most expensive ones I’ve ever purchased, I soaked the tire in water heated by the sun for one hour prior and used soapy water to slip it on. It wasn’t too difficult, Been there done that but this time there was a definite crack towards the back of the tire and one more hairpin crack. I circled and put a small arrow pointing towards the cracking, the left one is much larger than the hairpin one on the right . The reason I replace the tire in the first place is because the original rubber one disintegrated while I was using the saw. I am very concerned this crack is going to carry through and split this new tire. I don’t have confidence to remove the other good original tire on the saw as I feel like I need this as a back up now. All my bandsaw’s are set up with different size blades, this particular saw runs a quarter inch blade only. I’m not sure if I should return this tire or just hope for the best, but at $250 it’s something to think about. Im truly a little disappointed. I thought about getting the blue ones off of eBay but decided to give you guys a shot since there were so many good reviews. Bummer
Philippe Delannoy
Reviewed in the United States on June 1, 2020
These tires run very smoothly on my bandsaw.I was expecting to have a hard time installing them as I read lost of posts online about this but it took about 2mn per wheel :-) The key is posted in the picture, we used zip ties to hold the tires in place. Worked like a charm.
GeneT
Reviewed in the United States on March 13, 2020
These were a pain to install! Part of that was because I really didn't have anywhere to hold a dismounted wheel, so I did it in the saw. Warm (not hot!) water helped, but ultimately you just have to bully it on. That done, following the included instructions, the blade tracked perfectly and my saw is reborn! Much less hassle than getting rubber tires that don't actually fit (i.e. no center rib), grinding your own crown, and having to use special glues to save perhaps $20 overall (ask me how I know all that...). These fit, they're snug enough that glue is completely unnecessary, and I expect they'll last the rest of my life.
Stefflerock
Reviewed in the United States on November 11, 2020
One fine morning, I cranked up the blade tension on my old Delta 20" saw, checked everything, and powered it on. Gasp - the original 50 year old upper tire blew all to pieces - and this was worrisome, since almost no parts are available for this saw - I thought I might have to purchase used or some such. Anyway, a quick search turned these up, and with some effort, was able to install these on the upper and lower wheels - yeah!!!Kudos to the person who posted the tip on using tie straps to help with the install - this is clearly the way to go.Also, I whipped up a couple of "tire irons" from an appropriate straight-grained hardwood, about 1/4" thick by 1 1/2" wide to help lever these on - dowels are generally of such poor quality that I would not trust the strength of them.And with that, I was up and running...
Richard Bauer
Reviewed in the United States on July 1, 2019
Fit perfectly and worked as advertised!
Jeff C.
Reviewed in the United States on November 12, 2019
A high school had an old Delta Rockwell 28-355 that some aftermarket tires had come off on. After doing some research these tires with the locking groove seemed to match the OEM tires. They are fairly expensive but they fit perfectly!
Recommended Products