Your cart is empty.
Your cart is empty.Mounts a flashlight on any handlebar. SIMPLE AND SECURE - Mounting almost every flash light within few seconds. High quality of manufacturing and assembly - Made in the U.S.A! With its unique mounting system you can fix almost every flash light to your bike!
Jeffrey Smith
Reviewed in the United States on January 16, 2021
Kicking myself for not inventing this in the first place. It's so simple and works great.It works best with flashlights that have a constant cross section (like a straight tube, instead of ones that get bigger near the bulb). If you can get its center of gravity right underneath the bracket, it will not vibrate. I recommend under-slinging the flashlight as opposed to having it on top of the handlebar - this makes it 'want' to stay in place better.My only complaint is that you can no longer see where you're going when you're doing a wheelie. But it stays in place after you set the wheelie down, so that speaks to how secure this bracket is.
D
Reviewed in the United States on April 16, 2020
The carded item I received says it's designed to fit "AA style flashlights" which evidently means 18mm (3/4") diameter pocket flashlights holding one AA cell (or two AA cells end-to-end) because the rubber cradle diameter is only 18mm. For example, it perfectly accommodates the width, length and weight of the LED MiniMagliteAA (6.5" length) pocket flashlight. I tried the much smaller LED MiniMagliteAAA, but it secures too loosely with very much excess Velcro strap overhang. Do not cut away any Velcro strap as its designed length is valuable as I will explain in a moment. The rubber cradles are 18mm and 28mm. The rubber cradles are soft and pliable. A wider diameter than 18mm flashlight may work as long as it's still a pocket-size (wider but very short in length) compact flashlight (because wider/heavier without length reduction will cause it to wiggle and jostle while riding). The 28mm cradle fits handle bars very well and even the much wider diameter vertical handle bar receiver/fork column due to its rubber flexibility. Also, try switching the cradles. For example, I fastened a light-weight plastic USB LI Ion rechargeable 35mm diameter 7" length flashlight to the handlebar with the 18mm cradle (instead of the intended 28mm cradle) and fastened the flashlight to the 28mm cradle with very good results. Instructions advise keeping the rubber cradles clean (to maximize friction). If you minimize flashlight wt./length and invert the cradles to accommodate respective cylinder diameters, you'll be very satisfied with the performance and versatility of this product.
Customer
Reviewed in Canada on August 8, 2019
Handy and works well
Renato B.
Reviewed in Italy on August 19, 2017
Semplice ma efficace. La gomma è di ottima qualità per cui si adatta facilmente ad ogni diametro. Ottimo sistema di serraggio anch'esso semplice ma veramente efficace. Dopo una serie infinita di articoli complessi e dalle mille viti e spessori con questo ho risolto il problema di illuminazione notturna potendo installarci sopra una pila di qualità e di un certo peso e volume. Facilmente gestibile su più biciclette. Spostarlo da una all'altra non potrebbe essere più veloce e facile. Ne acquisto subito un altro per sicurezza .... non voglio rimanere più senza .....
Mark Bray
Reviewed in the United States on January 22, 2016
Not long ago I was struck with the idea to attach a flashlight to my bike handlebars, as opposed to paying four times as much for an actual "bicycle headlamp." I went right to Amazon, did some research, and since they're so cheap I ended up buying three different kinds--the Lockblocks and two cheap Chinese made models. All three were pretty darn good, I have to say, but I like the Lockblocks the best. Here's why:1. My Costco flashlight fits snugly and securely--I'm not worried about it falling off or even moving around. The good thing about this design is that the flashlight sits directly above whatever you're attaching it to (provided that the thing you're attaching it to is horizontal, like handlebars), so you can attach it right at its balance point. Because of this, I can hit bumps and my flashlight never gets out of alignment because its weight is evenly distributed. One of the other flashlight holders I bought (the kind with the plastic sleeve) is designed so that the head of the flashlight juts out in front of my handlebars and the rear of the flashlight is pretty much right over the handlebars. I haven't done a lot of riding with it yet but I'm concerned that any bump I go over is going to cause the flashlight to move. We'll see.2. It just takes a few seconds to attach or detach the flashlight or the entire unit.3. IT DOESN'T SMELL LIKE GASOLINE. Read the reviews for some of the other inexpensive, Chinese made flashlight holders. People are saying, and I can confirm, that some of these have a strong, gasoline-like odor, which gets on your hands when you handle them. This is obviously due to the type of plastic these products are made from. I don't know, maybe the smell will eventually go away but aside from the smell itself I'm a little worried about the chemicals I'm exposing myself to.4. It's compact.5. The design is very simple. No screws or nuts or knobs or swivels. I'm sure that eventually I'll have to buy new velcro straps for this thing, but you can get 10 of those on Amazon for around eight bucks.Overall, great product.
Hannah
Reviewed in the United Kingdom on June 20, 2015
Bought for a bike light, the flexible nature of the attachment makes it much better than the more firm screwed on holders. A good buy,
miller
Reviewed in the United States on May 5, 2014
This flashlight holder is effective for what I would say is light to medium duty use. If you plan to go hardcore mountain biking, I don't think this will work for you (mainly because I doubt it will stay in place over excessive bumps). For leisurely nightly rides, or light trails, this will suit your needs fine, provided you don't load it down with an overly heavy flashlight. The rubberized block holds this product securely against your handlebars and the flashlight securely in place. My only concern is how long the Velcro will last, but for $7, I'm sure I'll get plenty of use out of it before it wears out.I currently run a FourSevens Mini ML flashlight in this holder and it works great. It is a small, light flashlight so it holds securely. In pairing this product with a flashlight I already owned, I saved myself significant money from buying a designated bike flashlight. If you already have a decent flashlight and are using this for light to medium use, I think you'll be very satisfied with this product. The last warning I will give is be careful you are getting a genuine TwoFish product. I ordered two of these and the second time I received a fake that shipped from China. The rubber was not grippy and the Velcro ripped the first time I put it on. So be careful your item is a genuine TwoFish product and that it ships from the U.S. Overall, this TwoFish product has met my expectations and worked well for my intended purpose.
John
Reviewed in Spain on November 14, 2012
Viendo las fotos tenía el temor de que se pudiera mover, me parecian más solidos los soportes de tornillo, pero una vez puesto en el manillar, queda muy sólido y la linterna tambien queda bien sujeta, he probado con dos Maglite, una Solitaire y una XL100 y las dos quedan firmes aunque para la Solitaire hay que apretar mucho las correas por ser tan pequeña. El paquete en que venía fue extraviado por la cia de transporte, una semana esperando para finalmente decirme que se había perdido, se lo comunique a Amazon y me mandaron un nuevo paquete y esta vez si llego sin problemas y muy rapido, muy bien por Amazon.
Zwoelfer
Reviewed in Germany on December 8, 2011
Habe eine Mountainbike-Halterung für meine Fenix LD40 gesucht - und weil diese Taschenlampe einen zwar ca. 2,5cm schmalen, aber ca. 4cm hohen Griff hat, passt hier kaum eine Halterung. Auf "gut Glück" und aufgrund der positiven Rezensionen habe ich mir dann diese Halterung bestellt.Jetzt, nachdem ich sie probiert habe, kann ich sagen, dass es für diese Taschenlampe keine geeignetere Halterung gibt. Sie verrutscht nicht, ist unauffällig klein (bei dieser relativ großen Taschenlampe kein Nachteil!)und ist sehr leicht. Ausserdem kann man sie wegen dem Klettverschluss sehr rasch montieren bzw. demontieren. Ich kann mir vorstellen, dass sie für alle Taschenlampe mit ca. 2,5cm Griffdurchmesser sehr gut geeignet ist.Über die Dauerhaltbarkeit des stellenweise recht dünnwandigen Gummi-Mittelstückes kann ich natürlich noch keine Aussage treffen, auf jeden Fall wird die Lampe sehr stabil gehalten und die Konstruktion wirkt durchdacht.Für mich gilt jedenfalls: "gefällt mir sehr" ==> 5 Sterne
Recommended Products
