Your cart is empty.
Your cart is empty.Product Description
Gear, 11-T pinion (32-pitch) (machined steel) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 32-pitch spur gears and 3mm motor shafts. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.
From the Manufacturer
Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.
Steve
Reviewed in the United States on February 6, 2025
It's simply too good.It's so hard it could strip your sprocket.
Dustin Hegge
Reviewed in the United States on February 5, 2024
Good
T.Brute
Reviewed in the United States on November 19, 2024
I used them for a non-traditional use. . They worked well.
Bolz
Reviewed in Germany on November 16, 2024
top Qualität
Christopher collins
Reviewed in the United States on October 22, 2024
11 tooth pinion awesome in my book
Donald MacKay
Reviewed in Canada on July 26, 2022
Exactly as advertised for a 1/8” shaft. Arrived on time as well.
mike neuzil
Reviewed in the United States on September 20, 2021
Use on my slash 4x4 to get good acceleration.
Stephen D. Shoemaker
Reviewed in the United States on January 22, 2020
Actually, I know this will sound weird, but it was smoother teeth than the original. Hopefully, it is harder steel than the original. The first one cracked by the set screw.
Dave
Reviewed in Canada on January 15, 2019
👍
SuperE
Reviewed in Canada on June 25, 2018
Running this on my Slash 4x4 with a 54 tooth spur gear so I can get more off-road action in. Really nice pinion gear that works as expected. I'd recommend putting some lock tight on the grub screw if you don't plan on changing this out very often (the blue lock tight can be removed without chemicals)
Marlonium
Reviewed in Canada on June 11, 2018
What's there to say? It's durable metal and fit is perfect. Genuine Traxxas part.
Damian
Reviewed in the United States on May 9, 2016
Worked great. I ordered this the same time I ordered the Castle 1410 system with 3800Kv for my brushed Stampede 4x4. Gave good speed and power. On 2S, I was popping wheelies on the launch so hard the truck would come off it's rear tires and make that wheelie bar work. I ordered a 13T to give even more speed and take out some of that torque so all my power is usable. I refuse to dial down the punch control...probably why I had to order new ring and pinions for my front and rear diffs. Oh well. This is still a good quality product. I didn't use any locktite, so my grub screw initially kept creeping back out, so I had to really give it a turn. I recommend just a HINT of the locktite. You don't want to have to fight to get it off if you decide to change the gear like I ended up doing.
Chris Parris
Reviewed in the United States on May 13, 2014
I bought this because we built a backyard track, and it's a bit on the small side. I can't get up to really high speeds with my Slash 4x4 that I could otherwise get at a more open track. As a result, the motor and ESC were straining to always throttle up with the stock pinion.I put this in my slash and the heat dropped about 20 degrees where it won't go above 135 for motor and 125 for esc no matter how hard I push it (7.2v and 8.4v nimh).I haven't run a lipo yet, so I'm not sure what that will yield, but so far this pinion is great for slowing down a vehicle, and allowing you to have much higher acceleration and instant power out of corners.
Recommended Products
