Your cart is empty.
Your cart is empty.Timken 710492 Seal
Customer
Reviewed in the United States on April 27, 2023
This inner dust seal will not slide onto my new spicer front axles, too small, and I have seen other comments, after the fact, with same issue.
LoriAnn Christopher
Reviewed in the United States on November 4, 2021
Dana 50 differential in a 2000 f250 on the right is the old one the left is this one. When you install the axles the seal gets pushed in just enough to leak. The difference in the gap from seal and the end plate is too small.
7.3 doc
Reviewed in the United States on July 5, 2019
Perfect fit
Joe
Reviewed in the United States on July 3, 2019
Timken is my go to for seals and bearings
Dave
Reviewed in the United States on June 6, 2019
Good quality good fit fast shipping
Alan Brown
Reviewed in the United States on March 18, 2018
Installed these in front differential of 1999 Ford F250 super duty built after 3/22/1999. What a job, with few tools and in the drive way. Make sure you have good jack stands and properly placed. And before going under the vehicle, try to shake the truck off of the jack stands. It would be better for it to come off before rather than during. Also, these seals do not have a seat. You can drive these straight through where they are suppose to be and into the axle, or the differential, depending on which way you drive them. I used a 2" rigid coupling from a piece of electricians conduit. It fit the outer part of the seal, but would not pass into the area where the seal was to be. O.D. 2&5/8". This with a piece of 3/8" althread and I was able pull the seal into place from the outer knuckle.
SemperFi0505
Reviewed in the United States on March 28, 2017
Good product, but I would recommend going to the upgraded metal axle seal from MotorCraft BRS-170. That one fit my 2008 Ford F250 perfectly.
Brandon B.
Reviewed in the United States on January 5, 2017
This part was to small to fit my 99 F250. The correct part I found for the inner seal was at O'Rileys or Advance Auto an the part number was 710701. Autozone does not have this part.
Recommended Products