Your cart is empty.
Your cart is empty.Product Description
Product specification
- Material:Enhance Nylon and Galvanized Steel
- Stem Length: 4inch
- wheel diameter:1.8inch
- maintenance-free grease pre-lubrication
- Pack qty: 10 Pcs
- Load Capacity: Approx. 160lbs
Premium Product Features
Smooth, quite, and high quality rollers
10 pcs garage door rollers are suitable for standard rails, used for all kinds of sectional doors and warehouse doors, perfect replacement for old garage door rollers.
Double sealed bearings can effectively reduce noise and improve the smoothness of operation.
High-quality reinforced nylon can effectively extend the service life of garage door rollers over 100,000 operations.
Bright galvanized high load rollers specified to perform up to 100,000 cycles at 160 lbs.
Sealed design-prevent dust from entering the bearing, grease pre-lubrication has anti-rust and anti-corrosion properties, and prolongs the service life.
Silent ball bearings-high-quality ball bearings can ensure smooth sliding of the garage door and reduce operating noise by more than 70%. Don't endure harsh sounds anymore.
Rich G.
Reviewed in the United States on March 5, 2025
They definitely made the door more quiet. I am pleased with this product.
Panchito
Reviewed in the United States on February 8, 2025
Works great! They were the exact same size as my old ones which made the process fast. Definetly noticed a slight difference in sound. Quality is A1. If you're looking to replace your old rollers with new ones.. get these.
Grnmtnboy
Reviewed in the United States on February 5, 2025
Easy installation and makes the door very quiet during operation. Highly recommended
Robert Cooley
Reviewed in the United States on January 6, 2025
Garage door was old but working well. New rollers made rolls my up and down smoother and quieter
S.TIK
Reviewed in the United States on September 8, 2024
The media could not be loaded.
Oklahoma Happy Campers
Reviewed in the United States on September 8, 2024
Recently had my garage door serviced and the guy replaced a bad wheel along with both springs. The new wheel that he used were identical to these. Made a huge difference so I thought I would replace the rest of them myself. Glad I did. The door is so much smoother running and almost silent. We can't believe the difference that these new sealed bearing and urethane rollers made. Very happy with these. Good build quality and we're really easy to install.
Gazza
Reviewed in Canada on August 26, 2024
This is a great product. Fitting all ten rollers made a significant difference to the noise from the garage door, which should now last for many years to come.
andy
Reviewed in Canada on March 23, 2024
Just installed these, seem to be solid rollers, cheaper in price than the box stores, they are quieter than the metal rollers I had.time will tell as to the longevity of these rollers. But for the price you really can’t go wrong
Mr Roger D. B.
Reviewed in the United States on October 15, 2024
These rollers are easy to install but take your time and watch a few YT videos on how to replace the old rollers. It will be very much to your advantage. It is amazing how much quieter the garage door is when it is opened and closed. Be very carefull when doing the bottom two rollers at the bottom of the door. It can be dangerous if it's not done correctly due to the steel cable connected to the door spring pully. If you're not sure, ask for some advice. The price on these were really a great price compared to others I saw on different brands of these rollers. I would recommend them to anyone replacing their rollers.
G Man
Reviewed in the United States on July 22, 2023
These are the typical size rollers with a sealed bearing which helps keep dirt out. The rollers that were replaced although still functional were rather old.These rollers didn’t provide any noticeable reduction in the operational noise although there might have been some. Most of the noise came from the actual old door itself.The installation process was not complicated but required some planning, especially for the lowest pair of brackets to which the lifting cables are attached.The following was the process:1. Start with the garage door closed.2. Replace the 3 middle rollers first by removing the top 3 (of the 4) hex-head screws and loosening the bottom screw enough to swing the bracket away from the rail.3. Slide the old roller out of the bracket and insert the new.4. Align the bracket by sliding it back to its original position and re-install the 3 screws loosely. Adjust the bracket as necessary and start by tightening the top, bottom and then the middle screws.5. Repeat the process for all 3 pairs of middle brackets.6. Replace the top rollers next by removing all 4 screws holding the bracket, remove the bracket and exchange the rollers. Attach the bracket by tightening all the screws.7. Lastly, replace the rollers for the lowest brackets. * DO NOT REMOVE THE BRACKETS *, as they attached to the lifting cables which are in tension.8. Open the garage door and detach the door from the opener by tugging on the detaching cord. This will allow for the door to be operated manually.9. Separate the vertical straight rail from the top horizontal curved rail by removing the nuts holding the vertical rail and move it slightly away from the top rail.10. Manually lower the garage door until the top roller exits the top rail at the separation.11. Replace the roller and attach both rails as they were.12. Reconnect the door to the opener using the cord.13. Operate the door in the normal manner.
ghamdize
Reviewed in Saudi Arabia on November 3, 2022
تاكد من مقاس قطر الاصبع الحديد .. الجودة ممتاز
Recommended Products