Shopping Cart

Your cart is empty.

Your cart is empty.

Start-X Remote Start Kit for Toyota Avalon 2013-2018 / Camry 2012–2017 | Push to Start Engine | Plug n Play | Lock 3X to Remote Start | 2012 2013 2014 2015 2016 2017 2018

Free shipping on orders over $29.99

$136.99

$ 67 .99 $67.99

In Stock
  • ✅ START YOUR VEHICLE REMOTELY- Use the most complete Plug N Play Remote Starter Kit to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. 😊 Cool your vehicle before entering in the blistering heat.
  • ✅ COMPATIBILITY – This kit is compatible specifically with an Avalon 2013-2018 and a Camry 2012-2017 Push-to-Start Engine button vehicles. Non Hybrid. 🔴🔴This kit will not work if you start the vehicle by turning a key blade or if the vehicle is a Hybrid. Factory remote required. Gas & automatic transmission vehicles only.
  • ✅ START-X T-HARNESS – This kit includes a unique Start-X T-harness that greatly simplifies the install. There is zero wire splicing or cutting involved, completely plugs into the factory connectors. See the video in the listing.
  • ✅ 3 X LOCK, OPEN DOOR SHUTDOWN - No need for extra devices. Start your vehicle by pressing lock 3 times on your existing factory remote. The distance you can remote start from is the same distance you can lock/unlock your vehicle. No remote is included in this kit. You may want to test your remote to see if it’s enough for your remote start needs. 🔴🔴 The vehicle will shut down when the door is opened.
  • ✅ USA - This kit is brought to you by Start-X, the leading plug n play remote start company in North America. The remote Start module is proudly designed and engineered in North America. With tens of thousands of satisfied customers, you can't go wrong. Start-X technical support agents are located in the USA and provide support in English.



Product Description

USA

USA- This kit is brought to you by Start-X, the leading plug-n-play remote start company in North America. The remote Start module is proudly designed, engineered, and manufactured in North America. With tens of thousands of satisfied customers, you cant go wrong.

Evo T-Harness

100% Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included t-harness dramatically simplifies installation. 100% Plug N Play.

Absolutely no wires need to be cut, tapped, or spliced. Simply plugs into the factory connectors. Watch the video.

Using Your New System - 3X Lock, Long Range Remote

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket remote is not necessary, there are no extra key fobs to carry around.

Optional Long Range Remotes:

For extra long range you can add an optional long-range RF kit. If you want to go all out, you can choose a cell phone module which provides you the ability to start from virtually anywhere you have phone service.

tharness

Unique Start-X T-Harness

The included t-harness is a unique Start-X T-Harness that can not be found anywhere else. The t-harness is neat and avoids the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.


Palermo
Reviewed in the United States on January 6, 2025
Received Start-X as Christmas gift and installed it in less than 20 minutes. Actually, I took my time because I didn't want to make any mistakes. It actually installs in less than 10 minutes.
DIYguy
Reviewed in the United States on January 4, 2025
So I expected this to be easier to install, but using the provided instructions and video, there was some missing information that would have helped. A quick and dirty installation would have been fine using the provided instructions, but I hate rattles, and the thought that there could be issues after adjusting the steering wheel made this something I had to do thoroughly. In addition to what is included in the kit, I recommend having a decent light source, a Phillips screwdriver, a 10mm driver, some quality self-adhesive foam tape (to wrap parts with to avoid rattles), a pair of pants that won't scratch up your paint, a plastic clip removal tool, and a small pair of flush cutters.*Watch the video and read the full booklet first.* Finish dirty installing/programming and test it before final mounting, securing, and reassembly!I wanted to do a tidy installation and avoid rattles and potential binding/damage during steering column adjustments and since I am a large man with large hands, it became necessary to remove the Phillips screw on the right-hand bottom corner, and the 10mm screw on the left-hand bottom corner, for more wiggle room to mount the device and tidy up excess wire adequately, (making sure to avoid the airbag). To do this I had to pull out the driver door entry floor trim and the console to floor trim panel it connects to, to get to the 10mm screw. (This was a pain). Note that while the driver door entry floor trim pulls straight up, the console-to-floor trim panel it connects to has angled plastic clips and a nut that holds this to a stud on the floor. To remove this without breaking it, after removing the nut, I had to pry away from the door, toward the accelerator pedal. On the first try, I made a mistake programming, so I ended up having to tear everything apart again, clear the program, and start the programming over. Don't be like me, test it before going any further than necessary. Also, it would be wise to test your steering wheel adjustment travel after installation to ensure there is no binding.
Nader
Reviewed in the United States on January 19, 2025
Installation was straightforward with the provided video. The only thing that needs to be done after following the steps in the video would be programming the device which is provided in the booklet and only took literally 2 minutes. The whole installation process didn’t take more than 20 minutes. Great product so far, I hope it remains that way.
Rodger Holmes
Reviewed in the United States on January 14, 2025
Easy to install only took about half an hour total.
Trevor
Reviewed in the United States on January 13, 2025
This is the best designed starter I have ever installed. Took me 20 minutes from start to finish.
MrNoSleep
Reviewed in the United States on December 31, 2024
This is an amazing product, followed the instructions and the video and it works great with my original car keys on my 2015 Toyota Avalon. I feel like anyone who is rating this product poorly is not installing the kit properly because it really does work !!
Stephanie Eisenbacher
Reviewed in the United States on December 28, 2024
The install of this is so easy, it literally took me only 10 minutes to install it, if you are looking to upgrade your car to have remote start I would recommend this. They have made it so easy to add remote start to your vehicle I am impressed. Just installed this and works great. I will re-evaluate after time and update review if I need to.
Sandra Glibota
Reviewed in Canada on February 28, 2023
Installed in our 2018 Avalon, no issues with the unit, took longer to figure out how to remove access panels on car itself.
st381
Reviewed in the United States on November 10, 2023
So easy to install I thought I did it wrong. Installed on 2017 Toyota Avalon. It took longer to delicately but easily remove the dash covers than to plug the wires in. Living in the southwest with temps 100+ degrees in the summer it will be nice to cool the car down prior to getting in it. It sucks that Toyota forces the engine off once you unlock the doors but that Toyota, not this device. Cheap awesome DYI project. Literally 30 minutes and 25 minutes of that was removing the dashboard panels so I didn’t damage them.
Recommended Products

$147.49

$ 57 .99 $57.99

5.0
Select Option

$29.99

$ 12 .99 $12.99

4.7
Select Option