Your cart is empty.
Your cart is empty.This Rola-Chem Side Mount Pitot-tube Flowmeter can easily be mounted to a horizontal pipe. Each unit is complete with instructions and stainless clamps. These instruments are calibrated to give actual flow as a visual indication. Both sides of the flowmeter are calibrated in gallons and liters per minute. This side mount flowmeter is designed to deliver accurate flow rates at a minimal cost. Fits 2" PVC pipe. Top mount.
MartolFart
Reviewed in the United States on November 10, 2024
We have fairly hard water here in SoAZ so some calcium scaling is expected and cleaning of components necessary. But when the ball gets stuck, sometimes it's really stuck requiring complete disassembly.... It would be way nicer if there were a way to do even the recommended cleaning with removing the meter from the pipe... and then a way to free up the bobbin/ball without a complete tear down....
micah brown
Reviewed in the United States on July 20, 2020
Brand new out the box and I get different readings all the time on my pool. The float gets stuck all the time and any time the pressure drops for back washing the float has a very difficult time returning to normal. Usually have to take the screw out, relieve the pressure or stick something in it to knock the float lose. I have bought 2 of these and they both do the same thing. Will not buy a third.
Alaska man
Reviewed in the United States on March 15, 2020
This was used in my Pool solar water heater and it works great! It was easy to install and esy to read. After installing I could read the flow from 30 or 40 feet away and alway know the unit is working properly.
David Porter
Reviewed in the United States on September 27, 2017
Do not have anything bad to say about this item works great.
Mannfred S
Reviewed in the United States on January 30, 2016
Easy to install and haven't had any issues- make sure you know the flow direction prior to install!
mark j dispoto
Reviewed in the United States on March 17, 2015
works as expected
Indy jones
Reviewed in the United States on May 25, 2014
installed the product and turned my pump on for 10 min and it worked fine, then shut it off and started again. Upon restart the ball stuck in the bottom. I took the unit off and freed up the ball, but again it stuck on the 2nd attempt, Took the unit off 3 more times and repeated the described process and it stuck every time.I would not recommend this product to anyone with a pool.
Raypa
Reviewed in the United States on March 15, 2014
Received it within a few day only and installed it on my 3in pipe existing hole. Readings very clear. Very satisfied
Recommended Products