Your cart is empty.
Your cart is empty.Product Description
-
Cleaning and Post-curing
- Cleaning time: ≤5mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 30mins
-
Cleaning and Post-curing
- Cleaning time: ≤5mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 30mins
-
Cleaning and Post-curing
- Cleaning time: ≤5mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 30mins
Leah Bartoo
Reviewed in the United States on March 1, 2025
Very good resin.
Customer
Reviewed in Canada on February 23, 2025
This resin is very good! It is one of the best I have tried, and I have gone thru so many on my S4U it is crazy. Normally I like to stick to water wash options, but when this came up I thought I would give it a try.The worst part of the resin is the time it takes to dial it in and get the results you expect with calibration blocks.The toughness is great and the smell is not bad at all. I have had much worse than this, no mask needed for me. The resin drips clean pretty well after finishing and a dunk in the really dirty IPA followed by the turbo wash then a ultra sonic before the cure and it is perfect. Details were there and the structure was still and just like a true ABS. Only downside is the pricing, if that could come down I would use more of it.4.5-Stars
Adrial
Reviewed in Germany on February 13, 2025
Ich bin Amazon Vine Produkttester meine Bewertung wird nicht durch Amazon dem Händler oder Hersteller beeinflusst.Ich habe dieses Produkt bestellt und möchte meine Erfahrungen mit euch teilen, um euch die Entscheidung zum Kauf oder auch nicht zu erleichtern.┅¦ 🎇 Design ¦┅☑ KlasseDas Resin hat einen wirklich super Grauton auch nach dem aushärten ist es immer noch zu 99% mit der Flüssigen Farbe vergleichbar.┅¦ ☀ Verarbeitung ¦┅☑ TopDas erste Resin das als Figuren druck einen Sturz überlebt hat, ohne zu zerbrechen.┅¦ ✪ Benutzerfreundlichkeit ¦┅☑ Wirklich EinfachJeder der sich Resin kauft sollte sich mit der Verwendung auskennen.┅¦ Fazit ¦┅Ich persönlich kaufe es auf jeden Fall wieder.
Timothy
Reviewed in the United States on January 30, 2025
Great resin... perfect for action figures and mechanical parts... Id still recommend mixing it with 20% anti-impact, 20% Th72, and 60% Tough74... atleast for action figures... by itself it is probably the best straight out the bottle resin you can get... but people complain about it becoming a little more brittle then m58
Jeremy C
Reviewed in the United States on September 3, 2024
I picked this resin up to print a few parts that require the ability to bend when stressed and not break. I have used several other brands of tough resin over the years and all of them have a breaking point when the part eventually snaps.I cleaned out my Saturn 2 printer and added this resin undiluted and sliced my files in Lychee. There is no default printer setting for Lychee on the Resione website but they do have profiles for Chitubox. I wound up using the default Saturn 2 resin profile and the parts printed perfectly fine.The parts were easy to remove from the build plate and the supports all remained very firmly on their models. There is very little odor from this resin. I could not remove the supports before my initial cleaning so I rinsed them in denatured alcohol and then took them to some warm water.The warm water helped loosen the supports and they all came off easily after that.I ran my parts through a 2 minute UV bath and let them dry overnight. In the morning I did some drop tests. I dropped the dog in the picture off my desk onto the cement floor a few times and the legs are perfect without any breakage. I can bend the legs about thirty degrees and they dont break but you can feel the resin begin to stretch to its limit.Overall this is one of the best "tough" resins I have tested. It's definitely better than the resins I have made by mixing in standard resin with flexible resins.It is perfectly firm but has enough give in the material that your parts can survive a drop.
trigger
Reviewed in Japan on December 5, 2024
剛性と靭性を兼ね備えた優れたレジンで、可動フィギュアやミニチュア制作に最適です。洗浄が簡単で、細かいディテールも保持。耐摩耗性が高く、長期間の使用にも耐えます。ELEGOO MARS3での印刷もスムーズで、安心して使えました。
Dave W.
Reviewed in the United States on December 4, 2024
I was really surprised that there was almost no smell. It's not often you find a resin that prints beautifully and is low-odor. I'm definitely going to be buying more of this.This resin sounds perfect for printing miniatures and figures. It might not be quite as tough as ABS plastic. But with it being wear-resistant and impact-resistant, it should hold up well over time. The added grip is a nice bonus too.This resin is a dream to work with! Printing came out smooth and cleanup was a breeze. The resin itself washes away easily, leaving a clean model. Even cleaning the printer afterward was super easy.I was a little worried about leaks, but I had no problems. The bottle was well-sealed and easy to pour. It's always a relief when you don't have to deal with messy spills. Highly recommend it!
Devan Stott
Reviewed in the United States on December 25, 2024
Really good detail and cleans easily. Have really enjoyed the figures I have printed.
Manuel Manzano Gallart
Reviewed in Spain on December 10, 2024
No me había animado hasta ahora con este tipo de resina porque mi impresora no tiene calentador y no me fiaba demasiado, pero al final he hecho la prueba y la verdad es que las piezas quedan geniales. Hice la prueba con una figura del mandaloriano tipo GI Joe y tanto a nivel de detalle como de dureza me ha sorprendido, es lo suficientemente dura/flexible para que no sufras si se te cae al suelo y se te rompa en mil pedazos como con las resinas normales. Por otra parte con los valores del fabricante me ha funcionado bien y no he tenido que hacer demasiados experimentos ni pruebas de impresión. Eso si, es un resina bastante espesa y a la guarrada que se monta con las resinas normales hay que añadirle ese factor. Repetiré cuando quiera imprimir mas piezas de este tipo desde luego, de momento, la resina que mejor resultado me ha dado.
Harfang des neiges
Reviewed in France on November 6, 2024
Je suis totalement satisfait de la résine RESIONE pour mon imprimante 3D ! Ce photopolymère UV a surpassé mes attentes. Les résultats d'impression sont fantastiques : les détails des modèles sont précis et nets. Que ce soit pour des figurines ou des miniatures, les détails fins et les bords nets donnent à mes projets un aspect professionnel.Même pour des impressions techniques, aucun souci.La résine est non seulement ultra-résistante, mais elle offre une durabilité et une résistance aux chocs, parfaite pour des modèles durables. J'ai déjà fait plusieurs impressions avec ce matériau, et la qualité m’impressionne chaque fois. Le gris est aussi très esthétique et met bien en valeur les détails, facilitant également les retouches.En bref, je recommande vivement la résine RESIONE robuste ! Elle est un peu plus chère que d'autres résines similaires, mais le prix reflète bien la qualité du produit.
Saul V.
Reviewed in the United States on November 18, 2024
I designed articulated detailed figures, and this resin has been very reliable with constant friction. I didn't have any problems when printing. The bed and support adhesion were also good.Overall this is a resin that in my experience, can handle being rougher with it. I would recommend it.
Guillermo Hugo Gamero Osorio
Reviewed in the United States on October 2, 2024
La mejor resina para figuras de acción que acabo de obtener
G R
Reviewed in the United States on October 19, 2024
Had a bit of a struggle to get this resin calibrated. I use Lychee and there was no profile for this resin on their website. After a bit of guess work it got it up and running. No issues with prints since then. After washing, cleaning and curing I tested out the prints by dropping them from my work bench onto the concrete floor and was pleasantly surprised that none of them broke. Definitely one of the better tough resins I've used.
Recommended Products
$59.99
$ 27 .99 $27.99