Your cart is empty.
Your cart is empty.Product Description
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Pixhawk 2.4.6 Pixhawk 2.4.7 Pixhawk 2.4.8 Flight Controller
A new generation M8N GPS,with low power consumption and high precision,
the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than
the previous generation NEO-7N 1.4-1.6 meters accuracy,support GPS/QZSS L1 C/A,
GLONASS L10F, BeiDou B1 protocol and mode or more.
GPS Specs:
- Receiver type 72-channel M8 engine - GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 - SBAS L1 C/A: WAAS, EGNOS, MSAS - Galileo-ready E1B/C M8N) - Nav. update rate1 Single GNSS: up to 18 HZ - Concurrent GNSS: up to 10 Hz - Position accuracy2 2.0 m CEP - Acquisition2 Cold starts: 26 s - Aided starts: 2 s - Reacquisition: 1.5 s - Sensitivity2 Tracking & Nav: -167 dBm - Cold starts: -148 dBm - Hot starts: -156 dBm - Assistance AssistNow GNSS Online - AssistNow GNSS Offline (up to 35 days)3 - AssistNow Autonomous (up to 6 days) - OMA SUPL & 3GPP compliant - Oscillator TCXO (M8N/Q), - Crystal (M8M)
- RTC crystal Built-In - Noise figure On-chip LNA (M8M). Extra LNA for - lowest noise figure (M8N/Q) - Anti jamming Active CW detection and removal. Extra - onboard SAW band pass filter (M8N/Q) - Memory ROM (M8M/Q) or Flash (M8N) - Supported antennas Active and passive
- Odometer Travelled distance - Data-logger For position, velocity, and time (M8N) - Operating temp. -40° C to 85° C - Storage temp. -40° C to 85° C (M8N/Q) - -40° C to 105° C (M8M) - RoHS compliant (lead-free)
Important:
The GPS light only can light up when it search the satellite signal outdoor.
ROM already been fix，it cannot be flash and change.
Package includes:
1x M8N GPS Module Built-in Compass for Pixhawk 2.4.6 Pixhawk 2.4.7 Pixhawk 2.4.8 Flight Controller
1x Black GPS Holder
Kevin
Reviewed in the United States on February 15, 2025
I had two. One with the kit that never worked and the second worked I believe but I had disable prearm gps fix in mission planner due to the troubles with the first resulting in a crash. The second has not been able to gain a fix stable enough for flight since. For the $60 required to get something working might as well try brand name gear.
saad alnumairy
Reviewed in the United Arab Emirates on November 23, 2020
excellent job thanks
garzum01
Reviewed in the United States on June 8, 2019
Finally got the drone ready, but after a few attempts to fly, the compass stopped working. Gps does worj but compass not.
Brian Buckmaster
Reviewed in the United States on April 8, 2019
I could not calibrate the compass on a Tarot quadcopter I just built. The unit I was using was salvaged from a crash; ;thinking that it may have been damaged, I bought this one. The module arrived on time, and as soon as I installed it I was able to complete a successful calibration. I have not yet flown the aircraft as I am waiting on a receiver, but I expect it to work just fine.
MikeyG
Reviewed in the United States on March 18, 2018
Worked awesome, for about 5 minutes. Now just a solid red light, and doesn’t pick up any satellites.After a quick email conversation, they sent out a new unit that works great. Definitely a satisfied customer now.
Hoda S.
Reviewed in the United States on March 15, 2018
I ordered this GPS to use with my autopilot and as I received it I opened the case to see inside and make sure that it's original Ublox and it was. I used u-center program and as I connected the GPS it gave me 3 satellites in my home under the roof which is great. Also it has external compass that its very necessary, you can't trust internal compass on the autopilot board.
Louis
Reviewed in the United States on February 16, 2018
Included everything shown in the photos, nicely packaged.Disassembled it, so I could figure out the wiring, and connect it up to a Beaglebone Blue (had to change plugs). PCB has informative silk for those "do it yourself" projects.Had some difficulty screwing the pole into the upright position, but found out a set screw was sticking out too far. Because the flat on the pole is tapered, I simply raised the pole a bit and the set screw was able to go in further.PinoutsIf you can't read the photo, the labels are (from top to bottom) SCL, SDA, TXD, RXD, GND, VCC.TXD and RXD are with respect to the GPS chip, so connect RXD to the Beaglebone UART_TX line and TXD to the Beaglebone UART_RX line. VCC was connect to 5V. Signals (SCL, SDA, TXD) are 3.3 volt level.Arducopter detected the GPS and compass on the first try.
Luciano Perez
Reviewed in the United States on April 6, 2018
Love Ready to Sky!They have great products and super good quality at affordable prices!!This GPS is one of the best I have been using in my new Quad fast and accurate positioning.Thank you!!!
Scott W.
Reviewed in the United States on September 6, 2017
Ordered 2 units as spare parts for one of my company's Pixhawk aircraft. GPS worked, but magnetic compass element was defective on both.
Recommended Products
$65.99
$ 28 .99 $28.99