Your cart is empty.
Your cart is empty. RC4GS V3 General Information
1) 5 channels, 30 models memory storage, a key switch to change mixes control, dual-rate and cruise control, with timer setting for training and racing, DSC port is optional for simulator, TBS crossfire.
2) RC4GS V3 can be works with: R7FG/R6FG/R6F/R4FGM/R8F/R8EF.
3) Note: please calibrate ESC (electronic speed control) before first use RC4GS V3 with your car.
Specification:
Size: 174.8*116.4*224.2mm(6.88*4.58*8.83")
Weight: 319g(11.28oz)
Channel: 5 channels
Model Memory: 30
ID seed: 10
Antenna Length: 106mm(4.17")
Control Range: 400 meters
Operating Current: 80-120mA
Operating Voltage: 4.8-16.8V,(6pcs of AA batteries or a 2S-4S LiPo battery),Battery not included.
RF Power: Frequency: 2.4Ghz ISM Band(2400MHz--2483.5MHz)
Modulation Mode: GFSK
LCD Screen: 128*64 Resolution, LCD Backlight
Channel resolution: 4096 with regular jitter of 0.5us
Spread Spectrum: FHSS 67 Channels Pseudo Random Frequency Sequence Hopping
Low Voltage Alarm: Yes. When less than 7.2V or customized on 2-4S battery. (Customizable for each model)
Adaptable Models: Car(Incl.Crawlers/Tanks/Caterpillars etc.)/Boat/Robot
Compatible Receiver: R6FG(Standard), R7FG,R6F, R8EF, R8F, R4FGM,R4F
Battery Tray Dimension: 89*59*25mm (3.5*2.32*0.98")
Receiver R6FG(Standard Pack)
Receiver packed with RC4GS V3 is R6FG, 2.4GHz 6channels,gyro integrated and high voltage servo supported.
Size: 35*20*13mm (1.38*0.79*0.51")
Weight: 6g (0.21 oz)
Channel: 6 channels
Antenna Length: 205mm(8.07")
Operating Current: 30mA
Operating Voltage: 3-12V
Binding
1. Put the transmitter and the receiver close to each other (about 50 centimeters) and power both on.
2. Switch on the transmitter and the led on R6FG will start flashing slowly.
3. There is a black binding button(ID SET) on the side of receiver. Press the button for more than 1 second and release, the led will flash quickly, meaning binding process is ongoing.
4. When the led stops flashing and is always on, binding is complete and there will be a signal tower shown on top of the LCD screen of the transmitter. If not succeed, the led will keep flashing slowly to notify, repeat the above steps.
R6FG has two working modes：normal working mode and gyro working mode.
1. Normal Working Mode
Green LED, gyro will NOT be working.
2. Gyro Function Working Mode
Both GREEN and RED LED on.
Package contents:
1x Radiolink RC4GS V3 transmitter
1x R6FG Gyro Receiver
1X English manual
Samuel
Reviewed in the United States on February 26, 2024
The only transmitter I’ll buy. We used them for our crawlers really good products easy to set up, you can set end points (EPA) for every channel it’s great radio link I’ll stay with for ever now. And if by chance you end up breaking anything on the transmitter radiolink has a whole Ali express store with the parts for the transmitters.
Heather Trussell
Reviewed in the United States on November 1, 2024
Easy to use! My husband loves it.
Nick
Reviewed in the United States on June 28, 2022
Purchased this to go in my Gmade Buffalo Crawler. Works great and is perfect for the locking diff servo as well.
Eric
Reviewed in the United States on May 6, 2022
Easy to use, cool features, highly recommend.
rachael
Reviewed in the United States on March 11, 2022
Same day shipping and all the features you get on all the top dollar radios. Got mine set up to a custom drag slash and the range is incredible. Epa, Abs, gyro works well and best Of all you can adjust throttle curve. Better than the flysky gt5 imo and just all around great budget radio.
Del Schier
Reviewed in the United States on July 29, 2021
Very nice radio for the money. The gyro function works very well and makes my car track much straighter. The instructions could be better, the usual poor translation to English.
Bryan Leakey
Reviewed in the United States on March 8, 2021
Great product, but drops signal. And any RC person knows you happens when you loose signal, you go full speed into a mailbox.....
Robert Fry
Reviewed in the United States on August 1, 2020
Channel 2 does not work at all!!!Update: I got it to work! I had to recalibrate the remote to esc. It worked at first then I turned the gyro on. That's when it gave me troubles with channel 2. So I just had to recalibrate for some reason again. But it works and it is an amazing system!!! Comparitive to my spectrum dx5 in terms of programmability and so far had no issue with range. Awesome unit and just ordered another receiver for another vehicle. Thank you!
Recommended Products
