Your cart is empty.
Your cart is empty.Chris Boxberger
Reviewed in the United States on October 19, 2024
Do they work? Yes. The fit is good and feels solid. I had two broken lens on my stock fogs so I wanted to upgrade. The Raxiom Axial LED fogs that are on Americantrucks.com were my first choice, but saw these for $20 less and they included the 3000k setup so I thought I would give it a try. First off, as the pictures show it comes with a H11 harness… not sure why because the factory harness is the 9006/h10. They include two new harnesses you can splice in, if you want. I’m not a fan of cutting factory harnesses so I took my dremel and removed the center tab on the new light pigtails and gently spread the connectors inside the plug so the factory h10 would push on. Because the pins are slightly wider on the h11 plug you won’t be able to get the factory connector seated completely. I will probably end up getting the h10-h11 pigtail conversion kit later but it is snug enough and should be water tight. The American truck Raxiom’s come with the correct plug.My biggest hang up on this is there is no switch to change the light’s temperature. To change between 6500k and 3000k you have to turn the lights off then back on within a second or two. Not the end of the world, but I leave my fogs on automatic so it will always default to 6500k and I will have to turn them off then back on to get the 3000k.Finally the alignment. The 3000k led is mounted slightly higher in the assembly so when you turn it on, it actually is lower, position wise, than the 6500k. Initially I aligned the 3000k to about perfect, but then the 6500 ended up being almost a foot higher and directly in line with my headlights. Again if you could default the fogs to 3000k instead of having to switch them every time it wouldn’t be that much of an issue. Bummer.Anyways, tldr: spend the extra $20 and get the true plug and play led fogs from American truck.
Carter D.
Reviewed in the United States on October 16, 2024
I may update this as time goes on. They look/feel great. I trimmed the inside of the connection on the new assembly rather than cut/replace the factory connection on the truck. The factory connection has two bars while this light has a single bar so they won't plug and play as I expected them to. The connection wasn't perfect so I zip tied the connection together.
Christian H.
Reviewed in the United States on October 14, 2024
Was going for OEM clear housing look these where the only ones I could find. 3K look great and the 6500K matches the factory LEDs perfectly. Happy with them so far
Recommended Products