Your cart is empty.
Your cart is empty.Product Description
Our ball bearings are ideal for any machine that requires superior strength and lasting performance. Made with ultra-durable chrome steel; High-quality engineering and precision craftsmanship combined to create a bearing capable of supporting large bodies! With sealed bearings on both sides, you'll experience less friction and fewer issues with the ball bearing. The bearing sealed also has a dual-sided rubber seal, meaning it is covered from both ends, which removes the chances of damage. Lower wear and tear decreases maintenance costs. Our bearings are designed to fit in most standard appliances, tools, and machines. They're easy to use and require no instructions, meaning most workpeople can install it in a few seconds. Get your hands on the superior ball bearings, and rest assured that your project is supported by the best in the business.
No matter what kind of project you are working on, You can trust our Ball Bearings to help make it happen!
louise
Reviewed in the United States on February 20, 2025
Item right on time and looks great thank you!
Dylan Davis
Reviewed in the United States on June 26, 2024
This was the exact bearing I was looking for.
wbramey
Reviewed in the United States on June 3, 2023
Waited 2 days for delivery. Installed in a couple of hours and was up and running. No problems and I expect no problems as this vendor is top notch!
Cory
Reviewed in the United States on June 27, 2023
The bearing was exactly what I needed. Pulled the seals to check grease as other reviews said to do so. Found Very, very little grease in the bearings. Would have blown out immediately. Removed the 3 or 4 drops of grease and repacked. Good to go.
ReluctantConsumer
Reviewed in the United States on September 7, 2022
If you are interested in using these bearings at low temperature, you might want to replace the lubrication with grease known to be good at low temp! These are much cheaper than bearings that provide a temperature spec that's for sure. (Thanks to the person who suggested replacing lube in an answer to my question about these bearings.)More detail:I do astrophotography, and I wanted to use these PGN bearings in a telescope mount that turns very slowly to follow the stars. Winter is the best time for this since it's dark most of the time, so I want the bearings not to "gum up" at low temperatures - like 0 F. I bought some of these bearings and put them in the freezer for several hours. Their rotation was quite stiff when I took them out. I also froze the bearings that were originally in the mount, and their rotation was not as stiff as the PGN bearings.I then removed the seals from the PGN bearings, removed the lube as best I could using soapy water and then isopropanol and then blew them dry. I put in grease rated to -45 F and froze these modified bearings. They also were not as stiff as the original bearings after freezing. (Not sure if I packed as much grease in as the originals had, but I tried.)So, this wasn't super scientific, but, if you are interested in low temp behavior, put new grease in these bearings. These guys are much cheaper than bearings that provide a temp rating!
Jack Colwell
Reviewed in the United States on June 22, 2022
I purchased these to replace failed rear axle bearings on a gokart my daughter and I built. When they arrived they looked like new bearings. I knew these were inexpensive and assumed they were poorly greased like the last set, so I opened these up to pack them with high temp bearing grease, and spun the inner race to distribute throughout the bearing. So far these have survived almost 30 hours of gokart riding and they still move freely, with no notches or hangups. The previous bearings were the same price point as these and only lasted about 10 hours before seizure, I check them assuming they were adequately lubed from the factory, but after removal and disassembly I found the stuck one to be completely dry. Over all I think these will last quite a while sinse they were greased.
Brandon J.
Reviewed in the United States on June 1, 2022
My compactor started making some noise so I disassembled it to grease the balance shaft and I noticed the bearings in my centrifugal clutch were noisy and a little rough. These bearings matched the P/N and I verified the dimensions so in they went. For the price quality seems great, as good as auto parts stores at several times the price. If they fail I'll update my review but so far very happy.
Nad
Reviewed in Canada on March 7, 2022
Quality, 2010 dodge journey passenger cv axle intermediate, I saved over 200 dollars if I buy it from dealer
Peter T
Reviewed in the United States on February 28, 2022
Ordered this for my brother, a disabled vet who lives in a very rural part of Maine and uses a quad for small trips to the local store and his mailbox. The bearing failed on his quad and I had this shipped to him for a replacement. Estimated arrival was the following Monday. Three days earlier he called to let me know that it had arrived and raved about the quality. He was quite happy to see that it had rubber seals on both sides rather than just one side like the original.Considering the value, quality, and super fast shipping, I would not hesitate to buy from PGN bearings again.
Recommended Products