Your cart is empty.
Your cart is empty.The On-Stage SS7761B All-Aluminum Speaker Stand delivers reliable, adjustable speaker support in a highly portable package perfect for do-it-yourself bands, mobile-sound engineers, DJs, and even trivia-night hosts. A reversible upper shaft that has a 1 3/8″ mounting pole at one end and a 1 1/2″ pole at the other, provides compatibility with a wide range of powered and unpowered PA loudspeakers that have either type of standard mounting socket. The height adjusts from 45 to 72 inches, enabling precise speaker placement and sound direction to accommodate a variety of applications in performance venues, clubs, schools, and houses of worship. The height settings are easy to change using the tightening knob and are reinforced with the included locking pin for safe, secure speaker support. Made of tubular aluminum, the braced tripod base has a wide footprint that delivers outstanding stability and load balance while nonslip rubber feet stop skids to ensure the stand stays safely in place. The tubing is lightweight yet provides outstanding strength for dependable mounting of small-to-large speakers weighing up to 120 pounds. The base quickly folds down flat, making it simple and easy to load in, set up, tear down, and load out while also enabling compact storage and efficient transportation. With its durable black powder-coated finish that resists chips and scratches, this stand will remain looking fresh while unobtrusively blending into any venue, recording studio, or streaming setup for a professional presentation.
Katie E.
Reviewed in the United States on June 20, 2024
I bought this stand for my Spark Live amp. It is a solid stand that has good height adjustment and is very solid and stable. Good build quality
eduardo
Reviewed in Mexico on March 18, 2024
Me gustó el material. Es buen producto
Laszlo Suvoltos
Reviewed in Canada on May 20, 2019
Item a little loose at pole when I mount my Bose S1 Pro, a little electrical tape fixes issues, may use heat shrink as a more permanent solution, item shipped without bolt to secure adjustable height, went to Canadian Tire and bought correct thread size but bolt is bigger than original and cannot fit in hole, it can still tighten and secure height adjustment. Makes a nice solution to fully enjoy the Bose S1 Pro, only wish it came free of any issues.
Francis
Reviewed in Canada on August 11, 2018
Excelent et super léger.
DP
Reviewed in the United States on December 30, 2017
Lightweight and seems sturdy. Only been taken up and down a couple times, but has been in use holding a cab for some time. Packs up small.
Eric
Reviewed in the United States on September 22, 2016
Bought stand because it said it had a 1.5 inch mast. It is tapered at the end to 1.5 inches but flares out beyond that. Doesn't fit my needs. Misleading description. I needed a post that runs 1.5 inches.
Dan Ward
Reviewed in the United States on December 30, 2016
Absolute cheap crap! This brand used to have a good reputation, not sure what happened. I bought two of these. One had a cracked clamp the first time I tightened it and the other was missing a nut so I couldn't tighten it at all. Bad materials and poor quality control. Returned without requesting replacements.
GWC
Reviewed in the United States on September 21, 2014
I purchased two of these shipped from the same location (KY). One was shipped in the original box and the other was shipped inside another box. The stands are pretty good. I'm using them for 45 lbs. Community PA speakers. If you order these, make sure you have all the parts out of the plastic bags before throwing out. The nuts for the tightening knobs were missing and I found them at the bottom of the bags that the stands were in.
John
Reviewed in the United States on May 6, 2014
I have used this model for a decade or two (can't quite remember when I bought my first pair) and this stand continues the tradition of utility. The footprint is nice and broad making a reasonably safe place to place "modest" size speakers. I have a pair of old Community CS35 speakers which do fit on this, but that may be asking a bit much of this stand. Anything smaller is just fine.My favorite feature is the reversible mast for 1-1/2 or 1-3/8 speaker sockets. No goofy little plastic sleeves here. Just flip the stand over and you can put your smaller speaker on the 6 inches or so of reduced diameter. Flip it back and you have a continuous piece of 1-1/2 inch mast. Sweet.I use these things for antenna supports as well. The 1-1/2 inch mast is just right to hold many typical antennas including some ham antennas. Search "AHVD Portable Antenna" and "Superbowl TV Antenna" for examples.Sometimes these things go on sale for ridiculous prices. Watch for it and grab em when you can.
BLACKMONGOOSE
Reviewed in the United States on October 14, 2014
Professional sound guy that has used dozens of these of all different brands and these are great for the money. I use them for my portable system which is 2 QSC K12's. But I own 5 of these that I also use for light poles. Light weight as well. I used to work for an On Stage/ Music People dealer and we had really good luck with their products and they never hassled us on returns.
Linda Mineau
Reviewed in the United States on December 13, 2013
We manufacture speakers specifically for square dances and have sold over 230 sets since we began 4 years ago. We enclose information promoting these stands with all our orders. We have been calling square dances since 1972 and are presently callilng over 265 dances a year. There has never been any problems setting up or transporting this stand. We can't say enough good things about the construction and durability of these stands and recommend them to everyone. Hope they never stop making them.
Recommended Products
