Your cart is empty.
Your cart is empty.Product Description
maXpeedingrods 5000 lbs Air Suspension Bags Kit
Fitment
For GMC Sierra 2500 HD 4 Wheel Drive 2020 - 2025
For GMC Sierra 3500 HD 4 Wheel Drive 2020 - 2025
For Chevrolet Silverado 2500 HD 4 Wheel Drive 2020 - 2025
For Chevrolet Silverado 3500 HD 4 Wheel Drive 2020 - 2025
Fitment Exceptions
- Fits For 4-Wheel Drive Models ONLY
- Not fit ZR2 or AT4X models
- Fits For puck-style 5th wheel and gooseneck hitch mounts.
- Not fit for commercial chassis and side-mounted hitches.
Features
- Durable and safe
- High compressive strength and less noise
- Premium natural rubber material
- Ensure our driving comfort and reduce tire wear.
- Restore the original ride height and improve ride quality
Customer
Reviewed in the United States on February 12, 2025
Very pleased but 3 more sets. A+
Vizgarcia
Reviewed in the United States on January 2, 2025
Se miran muy bien los instalé y quedaron perfectos ahora solo hay que ver cuánto duran. Y se me olvidaba cuando los instale prendí el compresor y tenía fuga no llegaba el aire al amortiguador . En la T dónde se juntan los 2 amortiguadores se escapaba el aire no lo se tal vez son un poco de mala calidad las mangueras o las conexiones. T también para inflar los se tarde más o menos un minuto o menos .pues se verá con el tiempo esperaré y comento luego. .y se olvidó lo estuve revisando está un poco alta un lado derecho no sé si la bolsa es un poco más grande que la otra o se está llenando de aire más que la otra no es mucho es una pulgada y media de diferencia.pues las instale igual como dice las instrucciones que venían con las bolsas de aire .y también no se adaptan a una Chevrolet colorado 2005 .tuve que ingeniarmelas y hacer unos agujeros más , con rosca para poder ponerlos pero al final quedaron muy bien.
Willjam
Reviewed in the United States on August 20, 2024
INSTRUCTIONS TO INSTALL WERE CHOPPY BUT UNDERSTANDABLE - THE MAXIMUM PRESSURE ISNT LISTED (UNLESS I MISSED IT) - THIS PRODUCT HAS DONE THR TRICKL FOR MY HAULING NEEDS - I AM NOT VERY FOND OF HAVING THE UNITS ON INDEPENDENT AIR SUPPLY LINES - I INSTALLED A T FITTING ..... IN TEH EVENT OF A LEAK, I WANT THE WHOLE SYSTEM TO DRAIN, NOT ONE SIDE....THATS JUST ME... OVER ALL I LOVE THIS PRODUCT - SAVED ME FROM HAVING TO LOOK FOR A NOTHER TRUCK TO HAUL MY TOYS AND JUNK AROUND.Just DONT FORGET TO DEFLATE THEM (NOT ENTIRELY AFTER AFTER AFTER YOUR VEHICLE IS FREE FROM LOAD(S) - IF NOT YOU'LL FEEL EVERY MINUTE BUMP IN THE ROAD IF LEFT INFLATED..
BCX
Reviewed in the United States on July 3, 2024
5000 pounds of extra lift sets the truck perfectly level with heavy trailer on back increases, breaking by decreasing distance for breaking puts weight back on the front tire.
mike
Reviewed in the United States on November 26, 2024
I bought these for my 2012 Silverado 2500 for towing my 30FT. camper. They took care of the squat issue that i had but after a few hours they seem to leak the air out. I noticed that the fittings on the top of the air bags seem a bit cheap. I've read some reviews that you can find new sittings at Lowes or Home Depot, I will have to try that. Otherwise its a great kit and even comes with the shield for the exhaust to protect them from the heat. If I can fix the leak I will have no Complaints about the system.
Josh
Reviewed in the United States on November 19, 2024
i put these on a 04 chevy 2500hd. hands down best money i put into this truck i put them on with detriot axle shocks 5000 miles ago towing 8-12000 pounds daily. it was a game changer for this truck sense chevys 2500hds have f150 leaf packs under them.
todd
Reviewed in the United States on October 22, 2024
Works great. once you figure out how to install them it's easy
Ron Butler
Reviewed in Canada on October 2, 2024
Ordering them and I didn't look at the instructions or look fair enough in the reviews saying it wouldn't fit with fithwheel plates, but as you can see they fit
Monty
Reviewed in Canada on April 7, 2024
I bought this kit for my 2016 Chev 2500. After reading reviews about not enough mounting hardware…I can say my kit had more than needed. The upper mount they suggest bolting to the frame if you have a fifth wheel and I did buy some self tapping bolts for that…but I likely could have used the provided u-bolts with my fifth wheel mount. The kit fit perfectly. I did modify the e-brake cable clamp on the LHS just because I didn’t like how it fit…but the kit was good. I decided half way through the install I would add a compressor and ride control switches, but the provided schrader valves worked fine.
Customer
Reviewed in Canada on April 17, 2024
Just like most of the other reviews, say, you are short to 10 mm bolts. The instructions show using the thread bolts to mount the bags to the brackets, but that is incorrect. That’s probably why there are so many of those ones.
Steve
Reviewed in Canada on October 26, 2023
These are best installed strait into the garbage can. Firestone was out of stock so I bought these. The instructions are poor at best. Passengers bracket had to be modified so the airline port could be mounted facing the back. The kit comes with a ton of hardware that doesn't actually have any purpose yet shorts you on 2 mounting bolts that you do need. Fittings at the bags are propper push in fittings but the air supply valves are garbage. Picking up propper push in one's tomorrow. All in all don't rush/ cheap out and buy these. Buy the firestones
Thomas
Reviewed in Canada on October 17, 2023
Didn't come with correct hardware for bolting airbag mount together, also instructions are terrible and not very detailed, had to drill passenger's side top mount holes to make it fit, also having issues with air not staying in the one hair bag from the air inlet lines so have to buy other air inlets to hopefully get it to work
Jonathan Hightower
Reviewed in the United States on April 25, 2023
I’ll start out the review by saying I wish I could give them 3.5 the kit is pretty nice, and seems to be comparable quality to other much more expensive brands. When you first open the box, the box was pretty damaged and there were no instructions WHAT SO EVER so I had to figure out how to put the kit on pretty much with nothing to go off of, luckily it’s a pretty self-explanatory and bolts up pretty easily. They mount by wrapping two bolts around your frame, and then a bracket around the bottom of your axle. I did contact customer support, asking for instructions, and they simply told me they just do not have any for this model…. Overall, the kit took me about an hour to put on, nothing too crazy. You do have to remove your factory bump stops by prying them out with a screwdriver, and then they mount around the factory bracket. Overall, I’m happy, just wish they had a little better quality, packaging, and some instructions.
Recommended Products