Your cart is empty.
Your cart is empty.Product Description
Hard Density Wheel Perfect for Polishing
The buffing wheel is firm and thick, made of 100% wool fibers packed very densely in a form of a buffing wheel with a thick edge to provide an ideal buffing/polishing surface for sharpened knives and blades
Transform your Bench Grinder into a Buffing Machine
With a 1/2 inch arbor and 6-inch diameter, this wheel should nicely into your bench grinder and used for a capacity of up to 4500 RPM Max.
Allows you to polish up, hone and deburr knife blades and other cutting tools after sharpening!
Alain Beaudoin
Reviewed in Canada on September 19, 2024
Assurez vous que votre appareil soit bien vissé car ça vibre beaucoup
Country Cook
Reviewed in the United States on July 16, 2024
well made, works great, firm pressed wool
Lou from Virginia Beach
Reviewed in the United States on February 11, 2024
This wheel went on a EZ-Cab cabbing machine. Initially it was seriously out of round. With the cabbing machine running and the wheel mounted I ran a wood chisel across its face. The high spots hit first and were trimmed off until finally the wheel was round and flat. Charged wheel in cerium oxide by making a 2:1 solution of cerium oxide to water in a narrow plastic bin and rolled wheel in solution until it was soaked up. Wheel & cerium combo polished hard agate thundereggs perfectly. I would buy this wheel again.
Chip Mowack
Reviewed in the United States on November 2, 2024
Every buffing wheel I have order has a flat spot or is out of round. I have to put it on a lathe and cut it round. Very annoying!
Marjolaine Ouellet
Reviewed in Canada on August 24, 2023
J'ai une melleuse
Sonlover
Reviewed in Canada on March 11, 2023
Good quality and does what it’s supposed to do.
Dom
Reviewed in the United States on September 2, 2022
I prefer these hard felt wheels to bring a flat surface with sharpe edges on gold, silver or bronze up to a bright, final polish.
Quidam
Reviewed in Canada on August 11, 2022
It's not round, the hole is off-center, the hole isn't square to the face and the perimeter is dished.It's been crudely cut with a blunt press.This all means it wobbles and it's horribly off-balance. I spent about 45 minutes trying to square it off and it's marginally better, but I think I'll have to go back to my old worn out one and toss this one
mikee
Reviewed in the United States on July 14, 2022
Hard as a felt wheel should be so that it doesn’t round over a sharp cutting edge
Dan
Reviewed in the United States on December 1, 2022
Poorly Mae. Very wobbly. Sending back.
Belizondo
Reviewed in the United States on November 28, 2022
This pad is thick and dense as a good felt polish wheel should be. It polishes rocks beautifully and will last a very, very long time.
Ginette S.
Reviewed in Canada on January 14, 2022
pour polir des haches et des couteaux en acier fait a la main
Darrell G. Shannon
Reviewed in the United States on May 27, 2020
Take care to note the description on this product! Despite being felt, it is an extremely hard and aggressive material suitable to the cutting step rather than the polishing step. It is a high-quality item, with a nice wide face. My fault that I assumed the felt material would lend itself well to the final, or near final, steps of polishing. Instead, it does a respectable job on the cutting/sanding prep. The scratches created in the metal appears to be in the ballpark of 500 grit sandpaper. Not at all what I was looking for to polish, but now I have a tool to save manual sanding! I do recommend the product provided you are clear on your intended use.
Recommended Products