Your cart is empty.
Your cart is empty.That Guy’s Review
Reviewed in the United States on February 28, 2024
I all fit perfectly on my 94 ranger, the originals were road salt dead dude. It was a average level task, pull the bed off for plenty of working room. Rock on 🤘
James Jefferson
Reviewed in the United States on February 25, 2024
Nice replacement kit
vincent b.
Reviewed in the United States on August 15, 2023
Not much to it. It us exactly what it says it is. It's a full shackle and spring mount kit. 10/10 I'd buy again.
RWB
Reviewed in the United States on August 14, 2023
The brackets themselves are good replacements and line up perfectly. Shackles are good as well. However, they come with 3/8" bolts to mount the hangers to the frame, which is too small. You will need 8x 7/16 x 1-1/4" bolts and nuts for the rear hanger, and 8x 1/2" x 1-1/4" for the front. Also, does not come with front spring bolt, which if you're taking on this project, I highly doubt yours will be reusable. 2x M14-2.0 x (105-120)mm bolts and nuts is what you will need for that. (105 is stock length, up to 120 will fit without cutting the bolts. 105 is hard to find.)1st Photo is the front hanger with the supplied hardware, 2nd photo is with the 1/2” hardware I used
Mary Katherine Harmon
Reviewed in the United States on July 28, 2023
Liked everything about them worked great perfect fit
Collin Demankowski
Reviewed in the United States on July 17, 2023
This kit included everything to replace the leaf spring hangers, shackles, and rear leaf eye bushings. I ordered a set of front eye bushings and replaced those while installing this kit. The only issue I had with it is one of the included mount bolts snapped while i had torqued it down. The rest of the hardware worked great. If you need to replace one hanger, I would recommend this kit and replacing all four as I found the other original hangers were weak even though they looked fine prior to tearing down the suspension.
Recommended Products