Your cart is empty.
Your cart is empty.
Specifications:
Material: Aluminum Alloy
Height: 98mm (3.86in)
Weight: 115g (4.06oz)
Suit For: 1/10 1/8 RC Car
Package List:
1 * Wheel Tire Dynamic Balance Support
Reza
Reviewed in Canada on July 16, 2024
I couldn't assemble it due to issue with its screws, the manufacturer quality is very bad and screw doesn't fits and the tool is unstable.I will return it.
Joely Keen
Reviewed in the United States on June 8, 2024
Works as advertised but fitment is slightly loose on some wheel brands and I wish there was something better than an Allen wrench screw to keep the smaller wheels on the balancer. Just takes a minute to get the tire on but overall it works as advertised and will get the job done. Good low budget balancer and would recommend to others if price were an option
Michel Tanguay
Reviewed in Canada on March 24, 2024
Fonctionne très bien
Michael N.
Reviewed in Canada on February 5, 2024
This is a very high quality piece! It does what it's supposed to very well!
Chad
Reviewed in the United States on February 2, 2024
I bought this to balance my RC car tires , I do recommend use some hobby lube for the rolling bearing , out the box it was a bit stiffIt comes with two size hex mounts 12mm and 17mmWell madeI also recommend using 1-3 or desired nylon bushing when attaching the retaining screw to the hex thru the rimThere was a little play when only relying on the screw.Definitely worth the price compared to others on the market.
Kirk L Dowell
Reviewed in the United States on October 24, 2024
Good product
Brian
Reviewed in the United States on January 22, 2024
The screws on the bottom are to long , no instructions, and it’s an all round piece of crap. Look for something else
GeenrZ
Reviewed in the United States on September 3, 2023
This thing works incredibly well, especially for its price which I've seen for more for the same item from the same seller on other sites. Fits 1/10 and 1/8 wheels with ease! Although anything beyond a 1/8 truggy wheel (seen in my pictures) is probably not going to clear. Only draw back is the provided bearings are grease filled which doesn't allow as free of a low speed spin on most light weight 1/10 wheels. If you don't think you need to balance your wheels or have been hesitant like I was to get one these over price just get this and see how wrong you were!
Customer
Reviewed in the United States on September 20, 2023
I was worried about quality because it is so reasonably priced, it has exceded my expectations. Very well built. I have an expensive Integy balancer and this one is the better of the two for less than a third of the price. I will say the Integy balancer will do 1/5 (Xmaxx/Karaton) wheels and this one doesn’t quite allow for that big of a wheel, but chances are you’re not balancing your monster truck tires.
D91ICE
Reviewed in the United States on March 29, 2023
Using this to balance the tires on my SR10 that I race at a dirt oval track and my Slash that’s geared to the moon I use for speed runs. This little tool helps balance your wheels for smoother runs. I have balanced my wheels but my local track hasn’t started their season so I haven’t actually run my cars yet. I’m not sure it’s something that will be super noticeable on a dirt oval, but on my speed run Slash it should be. It’s a nifty little contraption and good tool to have. If you’re like me and enjoy messing with your rc cars as much as you do running them, grab one of these. Works on 12 and 17 mm hexes.
Customer
Reviewed in the United States on March 28, 2023
The bearings are low grade but you kind of expect that since this is a $16 balancer..Ive read reviews on higher price balancers and mostly its the same problems. The 1/8 attachment works ok just because of the weight of tire/rim. The 1/10 attachment wont give a true balance because of the bearings dont spin freely/ The bearing are a somewhat hard to find size of 7x13x3.5 and will pay higher. Ill post my results after getting better bearings
Aaron
Reviewed in Canada on November 22, 2023
Bought this to balance the Pro-Line Trenchers I purchased for my Kraton. The STOCK wheels (which are significantly smaller) rub both the back post as well as the base when installed on the balancer. The trencher wheels are an extra inch wider and also a bit taller so I didn't even attempt to fit them on here.I would install a spacer to raise the post, except that the "axles" provided are so short that the tire would still be in full contact with the back post! Utterly useless.Cannot balance my 14mm tires because the hex on the 12mm "axle" is not removable. Other reviews have mentioned that the bearings are filled with too much grease to spin freely - this is also confirmed. Great for balancing 12mm wheels only and even then I'm sure there is a better option out there. Requested a return / refund.
Recommended Products
