Your cart is empty.
Your cart is empty.Product Description
6" Milling Machine Vise Lockdown Swivel Base Drilling Acme Screws Hardened Metal
Durable Material
This bench clamp adopts high-quality ductile iron 80000 PSI to achieve minimum bending.
Hardened Clamping Jaw
The mill vice has a powerful clamping force and can fix workpieces very securely. Jaw width: 6.3'' Jaw opening: 6.3''.
Quality Lead Screw
Enclosed lead screw and sliding surface are hardened and grounded. High accuracy.
6" Milling Machine Vise Lockdown Swivel Base Drilling Acme Screws Hardened Metal
Adjustable Handle
The adjustable handle with a comfortable grip makes it easy to operate and improves efficiency.
Solid Base
The precise 360-degree scale help to adjust any position as you need. Greatly increased flexibility of use.
Multifunctional Tool
Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing.
Specifications
- Jaw width: 6.3 inch (160 mm)
- Jaw opening: 6.3 inch (160 mm)
- Bench clamp vise height: 6 inch (150 mm)
- Jaw height: 2 inch (50 mm)
- Base Swivel: 360º
- Clamping force: 29 KN max
- Gross weight: 78 lb (35.4 kg)
- Package dimensions (L x W x H): 18" x 13" x 8" (46 x 32 x 21 cm)
Package Content:
- 1 X 6 Inch Bench Clamp Vise
- 1 X Accessory Set
6-Inch Bench Clamp Vise w/ Swivel Base
This 6-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping force and can fix workpieces very securely. This ensures the stationary and stability of workpieces, so they won't move even slightly as much force has been applied by the fitter.
- Premium Quality Structure
- Powerful Clamping Force
- 360° Rotating Base
- High Accuracy Screw
Larkin Bray
Reviewed in the United States on September 15, 2024
Well made and beefy. There is no marking to zero your protractor. There are no slots cut in the bottom of the protractor, for the locator keys. Bottom line, it is a decent vise for a bargain shopping home machinist. It's no where near KURT quality, but neither is the price.
francois couillaud
Reviewed in France on July 19, 2024
peut être bon matériel mais je ne peux pas le dire car jamais livré !
Mark J.
Reviewed in the United States on February 10, 2024
To get the negatives out, the only ones are that on of the washers needed for it was missing (1 of 4) and some of the corners are quite sharpThat being said this is a solid purchase. There’s no slop in the jaw, solid cast iron handle for it and on contrary to what some reviews said, the T bolts that came with it fit perfectly for my mill based on what I needed for it. 10/10. The pricing is great too considering something similar from SHARS is 600 bucks or more.
Mick Pen
Reviewed in the United States on December 28, 2024
The 0 is lined up literally randomly and in no point can you actually see how much the vise is rotated as the 0 is not visible in any clamping position to the mill table! For what I am doing this is a critical oversight :-(
Petra
Reviewed in Germany on December 19, 2024
Sehr gute Qualität
Gunslinger44
Reviewed in the United States on August 6, 2023
This is an update to my previous review of the 5 inch vise. After the debacle of dealing with a poorly shipped and broken 5 inch vise, I had the opportunity to reorder. I placed an order for a 4 inch instead. It arrived with no issues and was intact. The vise itself is pretty awesome. It is hefty and does exactly what I need it to for my milling operations. I'm definitely pleased this go-around. If you're looking to upgrade your mill vise, this is definitely one you should check out.
Glen K.
Reviewed in Canada on July 7, 2023
This vice is well made, I was surprised at the quality you get for an economical price. I did remove the swivel base so I have more Z axis room on my small milling machine.
Carol
Reviewed in the United States on February 6, 2023
I ordered this vice(5") thinking it would be good enough for my needs . but I'm quite impressed with it really I've taken some measurements of it on the mill and its nice and square . the only reason i'm not giving it 5 stars is because like other have reported ,it does have a lot of sharp edges.. I spent maybe an hour on it taking the edges off so as not to cut my hands while handling the vice . but it does close nice and the sliding end of the vice is nice and tight and clamps up square ..the graduations on the swivel base are accurate and well embossed .. I would buy again ..
Dave Zehner
Reviewed in the United States on December 27, 2023
This is not a true milling vise but works fine on a drill press or workbench. For the money, it is a decent vise and is suitable for most jobs around the shop If you are getting into machining and looking for an actual milling vise, this is not what you need. I have no problem with the quality of the vise, just the description as a milling vise. All in all, it is a pretty decent vise and worth the money unless you are looking for the precision of an actual milling vise. I am happy with my purchase.
Cork
Reviewed in France on December 1, 2023
Très précis, pour le prix rien a redire
Jim Luthje
Reviewed in Canada on January 20, 2022
Quality seems good. Machining is excellent. I really like that the vice can be used separate from the swivel base. It may not compare with a Kurt but for the average hobbyist it's great! Recommended!
Hanson Electric
Reviewed in the United States on April 15, 2021
I like the vice, so far I have only used it on my drill press. It seems to be well made, good fit and finish on the vice. But I am disappointed with the handle - very rough casting - no finish work. Took me a few hours to clean it up.Keep in mind this vice is heavy and large. I use it on a 20-inch drill press. Might be too large for a smaller drill press.
Mark Novak
Reviewed in the United States on April 26, 2019
I did a lot of research and looking around before I settled on this particular vise. I put a lot of credit into the reviews that others wrote about their experience with all the vises that I looked at, with this vise having the most favorable reviews. With that said I received exactly what I expected, It has great down force, a good finish and operates smoothly. I knew from others reviews that the corners would be sharp and needed to be stoned and there might be some casting voids. There were a couple underneath that were not a cause for concern. The other thing I expected and it makes no sense as to why the mfg of the vise would do this, is a raised pad where the indicator mark should be for the degrees of rotation. No mark and the pad is raised 1/8" of the surface of the degrees marks. even if the mark would have been there it would have basically been useless as the surface was to high to get a good read. This surface needs to be lowered and a indicator mark added. Other than that a great vise.
Recommended Products