Your cart is empty.
Your cart is empty.Product Description
COMPATIBLE WITH
Tips:
This is not genuine OEM Auto Part . This is aftermarket part manufactured by FANLIDE, All of products tested to match OEM products,as good as even better than the originals
Please use the VIN to obtain the original part Number to make sure this is the right part for your vehicle. Any questions,please contact with FANLIDE for more details.We will help you solve the issues.
CP1
Reviewed in the United States on February 7, 2025
Looks great. Easy to install. Just as good as OEM.
Nick
Reviewed in the United States on January 20, 2025
Installed a year ago and decided to upgrade to LEDs recently only to find this housing melting internally from the heat of the bulb. So ridiculous, the factory housing on the other side which is 13 years older looks perfect still. Not happy at all, would not recommend. Manufacturer needs to pull this model, it could potentially pose a fire risk if gone unnoticed!
C. Earnshaw
Reviewed in the United States on January 15, 2025
Fit was exactly like the original Ford product. The case seemed to be a cheaper plastic than the sturdy original (aiuminum?) case, but that doesn't affect the fit or performance at all. The bulb was not as bright as the original bulb on the other side of the car, which is the reason I deducted one star, but that really doesn't matter to me. I never use these lights, mine just had a broken lens that looked ugly and needed replacing, and for that it was perfect. Also, for anyone planning to install these on a Focus ST, you DO NOT need to remove the bumper but do need to remove the bezel that the light is attached to from the bumper. To do this, remove the plastic liner/pan under the front bumper, heat the tabs of the bezel from behind the bumper with a heat gun, and then pry the bezel out from the front. You'll need to disconnect the wire and then you can remove the bezel and replace the light. Once the light is installed in the bezel, the bezel just snaps back into the bumper.
Britney Teich
Reviewed in the United States on May 17, 2024
This light came with a light bulb already inside. It’s so bright and also adjustable. Do the adjusting before putting everything back together. Perfect fit for my 2015 ford fusion 2.0L
Big Boy
Reviewed in Canada on February 29, 2024
Fit perfect.
Tyler
Reviewed in the United States on November 26, 2024
I couldn’t be happier with this replacement part! It fit perfectly, just like the original, which made all the effort worth it. Admittedly, removing the front bumper to get this installed was a bit of a pain, but once I got it in place, it worked flawlessly.The quality is excellent, and it feels sturdy, not like some of the cheaper parts out there. Everything lined up just right, and it’s been working perfectly since I installed it. It’s such a relief to find a replacement part that actually delivers on its promise!If you’re hesitant about tackling a job like this, just know that the part itself won’t let you down. It’s exactly what I needed, and I’m thrilled with the results. Highly recommend this for anyone looking for a reliable replacement!
Brandon
Reviewed in the United States on November 20, 2024
Worked great ona 2014 Ford Fusion Hybrid SE. Only had to remove the push clips on the inner fender well then was able to pop the side of front bumper out enough to replace the lights. No need to drop the entire bumper like every YouTube video suggested for some reason.
Tracy
Reviewed in the United States on April 8, 2024
This product is very well made. Fit very well in my car. I would definitely buy again if i had another fusion. They work really well so far.
Garth P.
Reviewed in Canada on August 1, 2023
Fits and words perfectly
Fer bernal
Reviewed in Mexico on July 20, 2023
Llegó bien
Chia
Reviewed in Canada on April 25, 2023
As expected
M. Eller
Reviewed in Canada on September 19, 2022
These after market fog lights are great value for money. However, I cannot give them 5 stars. Installation was a pain (THANKS FOR A TERRIBLE VEHICLE DESIGN FORD) but they fit perfectly into my 2012 Explorer. Amazon highlights these as "don't fit" but in fact they do. Checked the OEM part number and they work just fine.The reason I am not giving 5 stars is that the OEM lights are of better quality. There is a pin that prevents you from turning the bulb in the wrong way right where the metal deflector goes into the plastic housing. That pin does not exist with these cheaper lights. It also is a bit more difficult to set a new bulb into the housing properly but if you put the bulb in and watch from the front that the latches of the bulb overlap with the housing you should be fine. All in all great value for money.
SixtyFour
Reviewed in the United States on January 1, 2020
2013 Ford FusionAbout 2 years ago I had a deer roll up the bumper, hood, windshield and over the drivers door. The only damage I could see at the time was on the window pillar, but not enough for me to make a claim and go through a repair process which would likely result in a paint mismatch. Move ahead 6 months when I’m doing routine maintenance and I notice the hood release was sticking and the hood itself didn’t appear to be aligned perfectly. Not easily noticeable but if you were looking for it you could see something was a bit off. Fast forward another month and one of my ‘new’ driving light bulbs has burned out. Since you pretty much have to pull the entire front end off this car to replace lights I had replaced everything about a year earlier when one headlight had burned out (5 yr old car, I always have my lights on). So now I’m looking at this specific light trying to figure out how to replace just the one bulb without paying a shop to take my front end off. Thanks to YouTube there are ‘cheats’ which worked for me however that’s when I found out that that deer hit had broken the driving light bracket which holds the bulb. You know, the item I’m reviewing here? 😀 At that point I wasn’t ready to do a bigger repair so I just replaced the bulb but I stopped using my driving lights so that the light bouncing around didn’t bother oncoming drivers. But when I recently started doing research for new shocks and struts I remembered this part was broken which led me to this particular item. So if you’re still reading this long drawn out boring story let me get to some facts. This was the most inexpensive one I could find, it included a bulb which was pretty much same as OEM in brightness and color, and it fit perfectly. One thing to note is that this new lense is perfectly clear but my originals were a bit frosted. I didn’t notice until I stepped back to ensure it worked and I didn’t try to determine if it was by design or by age. But essentially it doesn’t matter why, they just don’t match. The best solution imo is, at this price point, to simply buy two and replace both sides at same time. The included bulbs make this a no-brained. I will be buying another as soon as I submit this review.
Recommended Products