Your cart is empty.
Your cart is empty.ENGLANDER PELLET STOVE IGNITER - BEST AVAILABLE! Fits Models: All Englander models 2004 to current manufacturer date. Part Numbers: ~ PU-CHA / PH-CIENG Specs: ~ 300W, 120V ~ 3/8” Diameter x 4 3/4” Length ~ Top of the Line - Exceeds all aftermarket & OEM standards ~ Exclusive 1 Year warranty with our no hassle replacement guarantee ~. Igniter for Fits Models: 25-PDV, 25-PDVC, 25-PI, 25-PAF, 25-PDVP, 25-PDVT, 55-SHP10, 55-SHP10L, 55SHP20, 55-TRP10, 55-SHP22, 55-SHP22L, 55-TRP15, 55-TRP22, SHP25, 55-TRP25
Ian
Reviewed in Canada on November 12, 2024
Lights fires
Michell Taccino
Reviewed in the United States on March 3, 2023
It fit perfectly for a great price!
Brenda M.
Reviewed in Canada on February 21, 2023
item failed less than 30 days of being used almost got stuck inside stove from it swelling.
Daniel R
Reviewed in Canada on September 24, 2022
i gave this a 5 star rating because it looks like a well made igniter and it shipped reasonably fast, however i have yet to install this igniter in my englander stove yet and several reviews say that the locking collar is too big so i may revise this review at a later date.
Kathleen F.
Reviewed in the United States on May 13, 2022
We are very happy with this igniter. It was easy for my husband to install, and we could then ignite our pellets without starter gel and matches. We would buy this again.
rg
Reviewed in Canada on December 12, 2022
Works excellent arrived on time easy to install
Dave H
Reviewed in the United States on March 21, 2021
This appears to be an exact replacement for the original ignitor. The ignitor itself looks identical, the wires are the same length, etc. As others have noted, the problem is that the collar on the new ignitor is too big to fit in the stove. The original collar has an outer diameter of 0.74"(18.8mm). The new collar has an outer diameter of 0.786"(19.98mm). In my case, swapping the collars was very simple. Just be aware that you'll need both metric and imperial hex wrenches. The set screw on the original collar is 1/8" hex, but the new one is 3mm hex. That turned a 5 minute job into a 10 minute job. It seems to be working great, though.
Jeff Ef
Reviewed in the United States on February 19, 2021
Didn't even last 6 months. Melted in half AGAIN. Back to lighting the stove with a torch.
Art Doherty
Reviewed in Canada on November 10, 2021
Good Product so far. Decent price and timely Shipping.
Adma
Reviewed in the United States on February 11, 2020
Every one was right the collar on the new one was about 1/8" diameter larger that stock part. My problem was the old ones grub screw was crushed into place with the lock nut. After fighting with it got the old one off. Installed old collar with new grub screw. But new grub screw was also too long. Had to spend some quality time with a hand file. Only spent 10 minutes to get it working right. Help future you out. Make sure you don't tighten the lock nut on top of the grub screw. Also You need an air gap at the end of the igniter and the hole in the pellet stove. Ensure you have enough of a gap (1/8" ish) before tightening up the lock nut.
Robin
Reviewed in the United States on December 19, 2020
As mentioned by many others...I had to replace the collar with the factory one since the new one is larger. The only issue I had was removing it from my stove. You may need to use a socket extension and hammer to drive the old one out from inside the stove. This was my first igniter in almost 15 years so the old one was pretty stuck. It heated up and lit on first use.
roc
Reviewed in the United States on December 8, 2018
Used this item for a month and a half and it stopped lighting my pellets. Is it customary for it to stop working after this time period. Very disappointed. So much for knock off parts. My original ignitor lasted 9 years!!
Interested Reader
Reviewed in the United States on May 18, 2017
I give this item a 5 yet have a serious problem with installation. I have had a PDVC-25 since around 2007 with an igniter that worked reasonable well until now. The vendor of this product which was extremely helpful as well as englander tech support. Had difficultly getting the original out and the new igniter collar doesn't fit my stove even after sanding it.The original igniter collar wont come off or I could have resused it. Still working on it. For the price and fast shipping it is worth the money. The other issue I don't know yet how to correct it and have on open case with englander. I will update when and if it is resolved. There is another review that had the same issue yet appeared to be able to use the original collar. The area where the igniter goes has been warped by stove heat? The standard 3/8 collar doesn't come close to fitting.UpdateFor some reason the outside of the 3/8 collar is wider than the original. Don't know why yet use the original by loosing the set screw. The problem with mine is that the original isn't straight. As a result I cant yet remove and reuse the original collar.UpdateHad assistance removing metal above collar and it then removed easily. New igniter heats much faster and is worth the cost.
Recommended Products
