Shopping Cart

Your cart is empty.

Your cart is empty.

Engine Coolant Thermostat with Sensor- Compatible with Buick & Chevy 1.4L - 2011-2021 - Encore, Cruze, Cruze Limited, Sonic, Trax - Replaces 131-180, 55565336, 55579010, 55593034, 902-808, 730-221

Free shipping on orders over $29.99

$35.99

$ 17 .99 $17.99

In Stock

1.Size:2.4l


  • Replacement Engine Coolant Thermostat Housing Assembly - regulates the flow of the coolant going through the radiator to keep the engine in its stable operating temperature preventing it from overheating. Therefore, making it a critical component in the vehicle as failure to replace may damage the engine and other critical parts due to overheating which can leave you stranded on the road.
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011, 2012, 2013, 2014, 2015 Cruze | 2016 Cruze Limited | 2012-2020 Sonic | 2013-2021 Trax |. The coolant thermostate housing can easily be located in front of the driver side or passenger side of the engine depending on the vehicle you have.
  • Replaces Part# 55565336, 55579010, 55593034, 34709, 902-808, 730-221, 730221, 85993, 49392, 131-180 commonly found on the popular Encore, Cruze, Cruze Limited, Sonic & Trax models including years 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will fit and function exactly like the factory part. If you are experiencing coolant leaks in the thermostat housing, weird or hot engine temperature readings, CEL (Check Engine Light) with codes P0597 - P0599 or worse the engine is overheating then you may have a problem with your coolant themostat housing.
  • Lifetime Warranty - This coolant theromstat assembly is a direct replacement manufactured by AA Ignition and comes complete with a lifetime warranty. If the part ever fails on your Encore, Cruze, Cruze Limited, Sonic or Trax simply contact us for a replacement. Save time and money by purchasing this coolant thermostat and take advantage of our Lifetime Warranty. See our website for full details.



Product Description

The coolant thermostat housing assembly regulates the flow of the coolant going through the radiator to keep the engine in its stable operating temperature preventing it from over heating. Therefore, making it a critical component in the vehicle as failure to replace may damage the engine and other critical parts due to overheating which can leave you stranded on the road.

If you are experiencing coolant leaks in the thermostat housing, weird or hot engine temperature readings, CEL (Check Engine Light) with codes P0597 - P0599 or worse the engine is overheating then you may have a problem with your coolant themostat housing. The coolant thermostate housing can easily be located in front of the driver side or passenger side of the engine depending on the vehicle you have.

Buick Encore

Fits the Following Vehicles:

  • 2013-2021 Buick Encore 1.4L
  • 2011-2015 Chevrolet Cruze 1.4L
  • 2016 Chevrolet Cruze Limited 1.4L
  • 2012-2020 Chevrolet Sonic 1.4L
  • 2013-2021 Chevrolet Trax 1.4L
z

Replaces Part Numbers:

  • 55565336
  • 55579010
  • 55593034
  • 34709
  • 902-808
  • 730-221
  • 730221
  • 85993
  • 49392
  • 131-180

  • Eliminates Check Engine Light (CEL)
  • Eliminates code P0597-P0599
  • Eliminates weird or hot temperature readings
  • Robust plastic construction

Replace Your Bad Engine Coolant Thermostat & Housing!

Failure to replace may damage the engine and other critical parts due to overheating which can leave you stranded on the road.

This is a compatible replacement part manufactured by AA Ignition. This coolant thermostat housing assembly is NOT a genuine OEM part. Vehicle makes and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this engine coolant thermostat housing assembly fits.

Experience the AA Ignition Difference!

ASE Certified Technicians

Installing parts on you vehicle can be difficult and we understand. That's why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you.

Strict Quality Control

All of our thermostat housings undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come. Satisfaction Guaranteed.

An American Business

AA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value.


Robert S.
Reviewed in the United States on March 23, 2025
I had a coolant leak coming the original thermostat and I lost heat in the car. I removed the original part and could see that it was cracked and that the rubber gasket was broken. I replaced the original with this part. The part fit and functions perfectly. After replacing the thermostat with the unit, the leak went away and heat began to work in the car.Good value for the part and it fits like the original part.Do some research before you try to install. While the part is perfect replacement, make sure you have the right tools to drain the coolant, remove the clamps and bleed the coolant lines.
Customer
Reviewed in the United States on January 29, 2025
Worked great while it lasted. But the wiring connections corroded and failed internally. Causing the thermostat to stay closed. Unfortunately it happened on the highway at 1am with no safe place to pull off. Motor is now shot.
FARAS.M.ALENEZI
Reviewed in Saudi Arabia on July 23, 2024
القطعة ممتازة جدا افضل من الأصلي (الوكالة) الومنيوم كامل مو نص حديد ونص بلاستيك والحمدلله ماشية معي تمام من ركبتهاVery good part, better than the genuine part even
Kayla L
Reviewed in Canada on November 25, 2024
I bought this for my 2015 Chevy Cruze 1.4l and so far so good..I had a code coming up regarding my thermostat and replacing it took it away. No complaints so far.
Customer
Reviewed in the United States on November 14, 2024
It was installed and works great!
Customer
Reviewed in the United States on April 14, 2024
Thermostat housing is good quality is good went on no problems gaskets work perfect only problem is is the cheap sensors that come with it so far too have failed since I put this product in just had the coolant temperature sensor fail on my wife got stuck on the highway luckily I've got about 20 years in automotive maintenance so it didn't take long to repair it... But from now on I will not buy anything that already has such an important sensor included I kind of probably should have known better but lesson learned
Esmeralda
Reviewed in Mexico on June 15, 2023
Es una pieza que instale en el 2020. Solamente volví a comprar la manguera del cuerpo de aceleración de arriba pero la pieza y termostato funcionan muy bie . Además un material muy resistente. La recomiendo.
arash jooya
Reviewed in Canada on September 28, 2022
Works great and easy to install
Willstart Tomorrow
Reviewed in the United States on April 15, 2021
Replaced cracked thermostat housing, water pump, serpentine belt and coolant hoses on Chevy Sonic. Thermostat housing included w thermostat. Do yourself a favor & get a torque wrench. It's extremely easy to over torque the bolts if doing by hand! Over torqued bolts will roll/distort the rubber gasket & increase risk for leaking. Bolt torque for 2012 1.8L is only 72 inch lbs (5.9 ft lbs).
Howard Wilson
Reviewed in Australia on August 5, 2020
This part replaces a GM component that's made of plastic and frequently fails as a result. The all metal construction here will significantly reduce the chances of failure.
R.Baker
Reviewed in the United States on June 22, 2020
The factory thermostat housing on 2012-2016 1.8L Ecotec engines has an all-plastic design. Newer models have a redesigned version that's half plastic and half aluminum. Over time both of these will start to develop cracks to due excessive heat and pressure in the cooling system. OEM specs call for a 20 psi radiator cap and a thermostat that doesn't begin to open until the coolant reaches a temperature of 221°F. An all-aluminum part is essential for handling that kind of stress. I'm very happy with this product. It was not that difficult to install and I saved hundreds over what the dealer wanted to replace it. It's been a little over a month since I installed it and have had no issues at all.Some items to note regarding installation that may be of some help:The throttle body heater hose has a quick disconnect that is on top of the thermostat housing. You simply pull up on it and when I did mine broke. Pressed for time, I went to the dealer for a replacement. The guy at the parts counter said it is common for this to occur. Also, removing the air filter box will make it easier to get to the connection on the throttle body itself. The OEM spring-type hose clamps were not tight enough to properly secure the hoses to the new housing. I replaced them with marine grade screw adjustables.
Ronnie
Reviewed in the United States on June 17, 2020
This thermostat arrived within 4 days of ordering. Fit was easy and perfect for my 2012 Chev Sonic 1.8L Hatchback. Also replaced the Throttle Body Heater Inlet Pipe. Installation for the two took 2.5 hrs. Between the two I'm now getting an average of Ten-MPG Better. The Check Engine light went off after running the engine for a minute, turning it off, then repeating five or so times and letting it rest for twenty minutes before restarting again.
James Salas Naranjo
Reviewed in the United States on April 27, 2020
I bought this part to replace the OEM thermostat housing on a 2014 Chevrolet Trax. I had leakage issues due to the fact the OEM part is plastic basically and the heat transfer from the aluminium motor was too much. I have seen other Chevrolet models using the same part having similar leakage issues. The OEM part was no less of $200 and is still a plastic part (not the thermostat, just the housing).This part fit perfectly a Chevrolet Trax 2014 1.8L engine. I replace the original clamps because those clamps tend to lose the original diameter with size and i just metalic clamps with a bolt to avoid leakage. I still need to see how much the actual thermostat will last. Nonetheless, just having the aluminium housing (for me) justifies the investment in this part.I have this part installed for two weeks: zero leakage and fan is working properly.
Recommended Products

$10.64

$ 5 .99 $5.99

4.3
Select Option

$30.25

$ 14 .99 $14.99

4.3
Select Option