Your cart is empty.
Your cart is empty.Product Description
Akmties led Turn Signal lights
Motorcycle led turn signals for Dyna, Street Glide, Fat Boy, Softail, Road King, Springer and other models
Akmties led lights Designed to be plug and play on Motorcycle with stock front 1157 2″ bullet style housings with dual contact / offset posts. These function as bright amber/white LED turn signals and bright white LED running lights.
bullet turn signals
led turn signal
1157 led turn signal
2 inch led turn signal
Motorcycles 1157 2 inch Bullet style turn signals
Fit for Dyna Street Glide Road King Iron 883
Turn signal light - Features Multi-Color Diode Technology. Turns from white running light to amber turn signal without ever going dark. No halo, just 48 LED’s lit up at all times. No wiring or splicing required. The turn signals feature raw LEDs bright giving the benefit of more light output and more on road noticeability.
Front Turn Signal Motorcycle
1.Running Light-48 LEDs White
2.Turn Signal-48 LEDs Amber
Motorcycles 1157 Bullet style turn signals are a plug and play solution to add a bright LED turn signal and running light to your Motorcycle .
How They Install signa light on Your Motorcycle!
- Use the screw driver to pop off the lens.
- Take out the original bulb.
- Put in the new LED light.
Front LED Turn Signals Function
- 1157 bullet
- Diameter 50 MM
- Easy to Installation
- Package include:2 pcs led signal light
Fit for Dyna, Street Glide, Fat Boy, Softail, Road King, Springer and other models with 2 inches standard new bullet style front turn signal lights and 1157 double contacts bulbs only！
2 inch LED Turn Signal Kit
Compatibilities:
2003 wide glide
2006 HD FXDI
2007 Ultra Classic
2009 FXD
2010 Motorcycle Dyna Wide Glide
2011 Street Glide
2014 I ron 883
2014 Ultra Limited
2014 Electra Glide Ultra Classic
1157 Base White/Amber Front Turn Signal Bulbs
2014 street glide special
2015 Motorcycle Ultra Limited Low
2016 Street Glide Special
2016 Fat boy S Softail
2018 RGS
2017 Sportster Iron 883
2017 road glide ultra
2017 road king special
2017 street glide
2017 HD i ron
Dyna turn signal
2018 street glide
2018 road glide special
2019 FLHX
2019 i ron 883
2019 Motorcycle street glide special
2019 Motorcycle ultra classic
2019 road glide
Tri-Glide models the turn signals may flash faster than normal.
Load resistors can be added if a slower flash rate is desired. Part Number EL60WR
Note:Compatible for Motorcycle with 2" Bullet Style Turn Signals and 1157 Socket(50mm diameter)
Fernando Ortiz-Brown
Reviewed in the United States on March 15, 2025
Great product
Sara
Reviewed in the United States on September 8, 2024
Bought these for our motorcycle. Easy to install and are very bright. Good buy.
Constance
Reviewed in the United States on August 29, 2024
Original purchase was in Feb of 23, 1 seems to work correctly and 1 stopped illuminating the white portion this morning in Aug of 24.I had no installation issues, items fit in the socket of 13 FXDC. Lights are bright and increase visibility in night time riding. Value for $$ seems to be appropriate, as I purchased second set today.
Dewayne Davis
Reviewed in the United States on November 8, 2024
Look good. Pretty good quality. Much brighter than the regular 1157 bulbs. Would have been nice if they came with the brackets I made to mount them. Definitely can't go wrong with them.
Steven E Billings Jr
Reviewed in the United States on November 10, 2024
Nice and bright, function well
Bill B.
Reviewed in the United States on June 28, 2023
The media could not be loaded.
PM Productions
Reviewed in the United States on February 11, 2022
Here's the cliff-notes version of why I chose these after considering all the others out there:1. Full panel white LED driving lights2. Full panel amber LED turn signals3. No "switchback" pattern when turning4. PriceHere are the specifics.I installed these in a 2017 Road Glide (the front amber 1157 version as I have an Ultra and don't have bullet rear signals). The installation took only a few minutes. If you have ever changed a turn signal bulb and are competent enough to do it correctly, you will have no issue installing these. Pay attention to the key-ways (slots) in the bulb holder, insert the connector correctly, turn it to lock it in place. Don't force it. If the bulbs do not operate, or are amber when they should be white, chances are pretty good you installed it incorrectly. Try again. Once you have the connection correct, rotate the LED board to gently coil up the excess lead wires, hold the board into position and snap in your new clear or smoked lens (you can use your stock amber lens but it kind of defeats the purpose, doesn't it?) and you are done.ALMOST.Next comes the part that some people miss. Your turn indicators on your dash are hyper-flashing (but the signals themselves are working normally). Easy fix. Turn on your 4 way flashers (hazard lights). Let them run for 5 minutes. If you have a late model bike (probably 2014 or newer) this should solve the problem as the BCM "learns" the new resistance in the light system. If you have an older bike, you may need a load resistor to correct this. But this is not a problem with these particular LEDs, it is a problem with updating to LEDs in general.The lights are full - panel white as running lights - not just a white "halo" where the outer LEDs are white and the inner ones are amber. When a turn signal is activated, the white turns off completely, and the lights flash amber. These lights to NOT change between white-amber when in turn mode. If that is what you want, there are plenty out there that do.I also have Custom Dynamics brand vent lights. For comparison, the white LEDs are about the same color temperature as the stock OEM headlight, and the Custom Dynamics white LEDs are a bit warmer white. The amber is the same as the Custom Dynamics amber.The rear of the circuit board on the lights I received has a pretty generous layer of epoxy over it. This should help to protect the board and give reliable operation. If that changes, I will update this review.
Conanpol
Reviewed in Canada on November 22, 2022
A date... ça fonctionne très bien, très satisfait de la qualité et de l'éclairage obtenus!
Víctor Pimentel
Reviewed in Mexico on January 27, 2021
Llegó en la fecha pactada, excelente producto, recomendable, alta calidad a precio accesible.
Jody R. Claybourn
Reviewed in the United States on October 20, 2019
Installed on a 2017 HD ultra limited. Easy install,plug and play. Used with smoked turn signal lenses. Lights are bright,but not overly bright. They complement the headlight and spotlights nicely. Just to be clear, the lights stay white until you activate the right or left turn signal. They then will flash amber. They also flash amber when you activate the hazard lights.7/29/20 an update on product. I ordered a second set of these. The first set has a few leds out. Which is disappointing, im hoping I just got a bad set the first time. Update on the second set will follow. Taking away one star for the trouble of ordering a 2nd set.12/6/20Yup leds are burning out on this set to. Gonna try a different brand
Recommended Products