Your cart is empty.
Your cart is empty.
High quality wood veneer edge banding
Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish.
Real oak wood pre-glued edge banding
Our red oak wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 roll of red oak wood, iron-on veneer edging with your purchase.
Easy to install plywood edge banding
The only tool you need to apply this veneer edging is a regular household iron at cotton temperature. A hot air blower or edge banding machine can also be used if you have these to hand, but a regular iron will be sufficient for a great application. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond.
BUY NOW and complete your furniture and cabinetry edging with this premium quality, iron-on red oak wood veneer edging
MICHAEL F. MARZICK
Reviewed in the United States on March 17, 2025
Edge banding worked on my kitchen cupboard shelving edge. Stained to match the cupboard doors. Made for a more finished look!
Arthur W. Swanson
Reviewed in the United States on February 14, 2025
Good quality. Quick delivery. All good
Jennifer Binneboese
Reviewed in the United States on December 29, 2023
Absolutely pleased with the red oak veneer I purchased for my DIY projects! It's been a versatile addition to my custom cabinets, coffee tables, and picture frames. The ease of use is commendable – cutting and applying it was a breeze. The quality is excellent, and the vibrant red oak adds a beautiful touch to my creations. Great value for the quality received!
Legamin
Reviewed in the United States on November 26, 2020
We use this in our cabinet shop and find it to be just as good as the non-glued veneer. It is too thin and the glue is all wrong for use in our antique restoration shop but if you are buying this for new-made furniture it is perfectly adequate. Be sure you set your iron hot enough and follow the application with masking tape to hold it firmly in place for a recommended 6 hour cure time before trimming, sanding and finishing. For best finishing results I recommend that you buy cork blocks and rub the veneer firmly once installed and cured to burnish the surface to get the truest most consistent finish and coloration. If you skip this step the wood dyes and finishes will adhere and behave differently giving less than satisfying results. Overall this can be used for all new furniture applications as long as it is applied carefully, cured and grain blended. It’s an excellent product that I recommend for any pre-glued application. There’s a bit of a learning curve but you have lots of veneer on this roll! Practice on some scrap first.
Timothy Kroll
Reviewed in the United States on October 4, 2020
sticks well, sands nicely and finishes good. Well worth the money when making something with oak plywood.
Paul McMichael
Reviewed in the United States on May 9, 2019
Surprised at the quality for the price! Used for custom shelving and will use the whole roll. In comparison to the small rolls from Lowe’s it’s about equal quality so for the price this is an amazing deal and will be getting it again! Went on easily the glue seams to be a high quality product and took stain well. All in all more than happy!! Seen reviews about the splices and would say it has about the same per lineal foot compared to the Lowe’s product and at least with the darker stain I used it to as the noticeable and if you pay attention to your application you can avoid using the splice all together.
tomtees
Reviewed in the United States on February 6, 2019
I build things, usually shelf units, out of oak plywood from the local home center. Of course, you need to do something with the edges. This product is the perfect width for 3/4 inch plywood, so there's a minimum of trimming needed. It's easy to apply, with a hot iron, and blends well. The photo shows two-inch banding for the edge of my desk. The open drawer is made of oak plywood with edge banding applied. Some LIGHT sanding, stain, and polyurethane completes the job.
David K Kemp
Reviewed in the United States on February 22, 2018
This is a great edge band easy to apply and except stains exceptionally well. There were no cracks in the edge banding in the center of edge band like I have seen on others that you have to cut out and ca not use. This whole roll was excellent and I will buy more. Plus the cost for this product is the best price I have seen around. So if you are looking for a premium edge band at a great price thus is it. I 100 percent recommend this product
Recommended Products
