Your cart is empty.
Your cart is empty.This kit comes with 2 - Dupli-Color (BFM0378) Sonic Blue Pearl Ford Exact-Match Automotive Paint - 8 oz - Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating. Ideal for use on all OEM paint surfaces, Perfect Match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories. For the final step in the exact color match process and to provide additional gloss and protection, finish with Dupli-Color Perfect Match Clear Coat. Plus comes with 1 Dupli-Color Prep-Wipe Towelette, specially formulated to remove oil, wax, grease, and other contaminants from the surface. A must for any paint project because it cleans and prepares the surface for painting.
Danny Sartin
Reviewed in the United States on December 18, 2024
It worked fine after a couple of sprays it will start spitting but did the job make sure you find the right clear coat cause this stuff is picky with what it likes to mesh with
DB
Reviewed in the United States on October 31, 2023
Spluttered right from the start as it has a poor quality nozzle on it, also began to leak out from nozzle so don't waste your money - stick with Rust-Oleum.
Velantoni
Reviewed in the United States on February 22, 2022
Nice color but price can be better it was 10% more the local retailers
drb727
Reviewed in the United States on July 5, 2021
the color match was good
Lee R.
Reviewed in the United States on July 3, 2021
Good color match. The only problem I had was keeping it from running.
Terry
Reviewed in the United States on April 6, 2021
Does a good job of covering up the panels on my paint job.
BGardner
Reviewed in the United States on July 9, 2020
Great product. Perfect color match. Love dupli-Color.
Retired and loving it!
Reviewed in the United States on October 15, 2019
My mustang got "keyed" and took a lot of primer and sanding. After the primer is done, you worry about matching the color. This was an exact match and after waiting a couple of days to let the paint cure I set to wet sanding. After blending edges with polishing compound and then buffing, (used my drill not a High speed buffer), you would never know that it was damaged. A perfect match.Best advice, be patient, take the time to prepare the surface. Here is a trick I learned to get a good application with no runs. You boil a pot of water. When at full boil you pull it off the stove. Shake the can for about a minute to make sure the paint is well blended. You then set the can in the hot water for about three minutes to warm the paint. Shake the can again and you will feel the can cool. Set it back in the hot water again and the second time you shake it you can tell the paint is warm. You can set it back again just to be sure.. Warning!! DON'T BOIL THE CAN DIRECTLY ON THE STOVE! YOU CAN CAUSE THE CAN TO EXPLODE!To get a smooth application do a light first coat and let it dry completely. Do several coats. I use a hair dryer between each coat to completely dry the paint. I applied a good layer of clear after.
Recommended Products
$59.98
$ 30 .99 $30.99