Your cart is empty.
Your cart is empty.
Products Performance:
1. 2.4G wireless DMX512 R/T
2. Input voltage: 5VDC 500mA MIN
3. Receive Sensitivity: -94dBm
4. Max transmitting power rate: 20dBm
5. Communication distance: 400M （visible distance）
6. Work frequency section: 2.4G ISM, 126 channels.frequencysection
7. Plug standard: US
8. Material: zinc alloy + plastic
Operating manual:
7 groups ID code and LED colorcorresponding relationship:
1.RED
2.GREEN
3.RED+GREEN
4.BLUE
5.RED+BLUE
6.GREEN+BLUE
7.RED+GREEN+BLUE
7 groups ID code, press key for setting,it only can work under same ID code of transmitter and receiver. (Same LEDColor)
Press momentary switch above the side ledindicator to indicate ID setting.
Press again to set IC, to the color IDdesired, adding 1 each time you press the switch will advance the color IDcode.
Working condition: LED constant lit up: NoDMX or wireless signal. Green LED flash: receiving.
RF frequency 2.400 - 2.525 Ghz, total 126channels, it's searching automatically.
Package Included:
7 x DMX512 wireless receiver (female)
1 x DMX512 Wireless transmitter (male)
8 x Adapter
1x Instruction book
David Bim
Reviewed in the United States on October 31, 2024
Could be a little more sturdy but works great.
FIDO
Reviewed in the United States on May 24, 2023
Works great but I didn't need them.
R.E.S , Rivera Electrónic
Reviewed in the United States on December 8, 2022
Llegaron bien justo lo k se describe ,gracias
John H.
Reviewed in the United States on January 7, 2022
These devices work really well. Good range, plug and play. We have incorporated them into a special wireless battery-powered lighting effect for a theatrical production. Manufacturer was very easy to work with after I fried two of the receivers with too high a voltage. The transceivers were easy to configure into our lighting system. We are so happy with them that we are starting to use them in place of running DMX cable in fixed lighting situations. One suggestion is that a 5-pin option would be useful. I have to use 3-pin to 5-pin converter to connect the transmitter to the existing DMX grid and most of our lighting foxtures are 5-pin.
Martell
Reviewed in the United States on January 22, 2022
Los vincule a una controladora y no mantienen la programacion
J. Hilson
Reviewed in the United States on September 6, 2021
Ordered in US for US use. I got European plugs on the 5 volt power supplies. Now I need adapters for the wall warts.I’m not impressed.
Matthew Tyler
Reviewed in the United States on November 1, 2021
I just used these wireless DMX transmitters to my Halloween display and they worked near perfectly. My display include 4 media controllers for running videos and two 16 channel AC controllers. About 5% of the videos didn't start on their programs, but that could be attributed to any number of other things, so I won't put it on these transmitter/receivers.There was no effort required to use these wireless DMX devices. I just plugged them in to the fixtures and powered them and they worked. What more can you ask for?
Darren
Reviewed in Australia on April 26, 2021
Country comparability for plug in was not labeled. I'm in AU and was sent US plugs.
lee n
Reviewed in the United States on June 1, 2019
they are good for small dj applications but their signal gets easily interfered with causing delays. also, they are extensively long on often interfere with the light's ability to pan and tilt. no battery power and require a 3 pin to 5 pin adapter which makes them EVEN longer. Prosumer at best
Recommended Products
$115.99
$ 46 .99 $46.99
$70.99
$ 28 .99 $28.99