Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Customer
Reviewed in the United States on March 17, 2025
Worked perfectly for a 2002 camry v6 le
Jim Rainwater
Reviewed in the United States on May 12, 2023
Perfect fit.
Customer
Reviewed in the United States on October 22, 2022
Perfect fit for Lexus rx300. These gaskets are metal and look exactly like the original equiptment.
Michael T Jones
Reviewed in the United States on August 17, 2020
Kit includes 3 gaskets: (1) for the plenum and (2) for both sides of the lower intake manifold (front & back). Gaskets fit perfectly and are still holding up a month later. Note: not included in this kit is the throttle body gasket but since its not a painted gasket, I was able to clean off and re-use the old one (I suppose one could remove the plenum without detaching the throttle body and the associated gasket but it would be more difficult). I also recommend that if you're going this far into the engine, you may wish to replace the front cam cover gasket (not included in this kit). I did not but I regret not doing it...
guylaine bouchard
Reviewed in Canada on August 16, 2020
ses parfait tres utile merci
joseph
Reviewed in the United States on March 20, 2020
Good value. Bought because i had to take out my upper plenum and it made more sense to get all the gaskets incase i need to use the intake gaskets later but also the price was good. Beck arnley is a decent brand for gaskets from what ive seen the last week of buying their stuff, better than fel-pro.
G-Law
Reviewed in the United States on January 29, 2020
I have used these several times for remove and replacing the intake manifolds for Lexus RX300 and they work great. They are a quality gasket set and have had no leaks or problems. I'm not sure why the other reviewer's set did not fit their RX300 but they fit mine. Maybe they sent the wrong part by accident.
WINDOWONTHEWEB
Reviewed in the United States on August 13, 2019
Fits right. The reviewer who said that their engine manifold doesn’t have the extra square bypass on the left side apparently didn’t realize that you have to remove the water outlet in addition to the lower intake manifold to replace the gasket.
Customer
Reviewed in the United States on August 11, 2019
I would buy again, but, I would advise to treat them kindly so that the rubber inside lining for the water coolant seals stay in place. They are not solidly secured to the rest of the gasket. I think this is by design. The older, 20-year old OEM ones we took off had the orange water rubber seals peel off separately, too. So, when you install, be sure all of the little orange (in our purchase) rubber seals are lined up and staying in place. You could use a TINY bit of proper sealant just to smear the cleaned head surface (You ARE cleaning the surfaces, right?) as you place the gasket back down. Up to you.
Mark
Reviewed in Canada on September 11, 2018
Had to replace the two knock sensors and knock sensor harness on my 2000 Toyota Avalon, ordered this set to replace the old gaskets. this gasket set is solid and well made. Just make sure you follow the correct torque sequence and torque the intake manifold and plenum to spec and you wont have no leaks. Product arrived on time and cannot argue with the price.
Norioca
Reviewed in Canada on February 25, 2018
good quality
Valley Guy
Reviewed in Canada on November 13, 2017
Purchased this gasket set (and other parts) for the replacement of knock sensors and wiring harness in a 2003 Toyota Sienna with a 3L V6. These gaskets came on a cardboard with a plastic wrap around. The plastic wrap was cut at the back of the cardboard, so not 100% sure if all the gaskets were packaged as original. No installation instruction or any torque values were included with these gaskets. All the gaskets seem good quality and fit well. No problem with any leaks after reassembly.
Recommended Products
