Your cart is empty.
Your cart is empty.Product Description
Clscea Bubble Counter
A bubble counter is an important accessory in a CO2 system. Choosing a premium accessory is vitally important.
INSTRUCTION:
- Screw the bubble counter onto the needle valve.
- Unscrew the top cap and fill 3/4 with water, firmly screw the top back on.
- Unscrew the compression collar from the top of the bubble counter, feed tubing through the collar, and firmly tighten to hold the tubing in place.
- Use the regulator's needle valve to adjust the flow rate.
- Count the number of bubbles going through the bubble counter and adjust the flow accordingly.
PACKAGE INCLUDED:
- 1 x Bubble Counter
Screw Connection
Compatible with many CO2 needle valves. (Suitable for M10x1 male thread connector.)
Robust & Durable
Aluminum alloy & PC materials.
Built-in check valve to prevent backflow.
Premium O-ring.
TobycW
Reviewed in the United States on January 3, 2025
Not too expensive. Has a small o-ring inside it--have no idea how to use it. Anyways, installed it and there are no leaks. I would NOT recommend you unscrew the bottom. THe check valve parts will fall out and can be lost easily. Don't do it!!!
Dale Richardson
Reviewed in the United States on September 28, 2024
This Bubble Counter Is Pleasing To Look At And Very Accurate
Andy Z.
Reviewed in the United States on August 27, 2024
I bought 4 and I only had them for a day at the time of writing this review. Out of the 4 I purchased, one of them has a defective check valve. The replacement policy is nice and for 10 bucks id say it was worth the risk. Definitely is a nice short term option if you are looking to save up for a better co2 kit. Paired it with a fluval 45g co2 kit.
Nick
Reviewed in the United States on July 15, 2024
They work well enough. I have mine connected to a splitter off my single stage co2 regulator so that I can split one regulator into 2 aquariums without buying an expensive dual output regulator. They hold onto the lines well and seem to act as a decent check valve.
Matt Cocanower
Reviewed in the United States on June 12, 2024
Works on my aquatek paint ball diffuser.
HaroldL
Reviewed in the United States on May 9, 2024
Nothing special, it’s a bubble counter! But it works fine. It’s affordable enough that if you did have to buy another it wouldn’t break the bank.
Alora witham
Reviewed in the United States on July 22, 2023
Does the job at first, but calcifies pretty quickly and then won't regulate bubbles as well because parts are stuck in place. Cheap enough to rotate out every 6ish months pretty easily, but I think stainless steel would be a better option for metal parts
peachman
Reviewed in Mexico on May 6, 2023
Llego en tiempo y los materiales son de buena calidad, hasta ahora ha funcionado Perfecto!
Mike T
Reviewed in the United States on December 14, 2023
Thank you A+ as described and works as it should.
Recommended Products