Your cart is empty.
Your cart is empty. The PoE Splitter splits a PoE signal into an 5VDC power and 10/100Mbps ethernet data source.
This device allows you to run ethernet cables from a PoE Switch over long distance, and then split the PoE signal into a separate data signal and 5Vdc power sources in order to run an non-PoE devices.
Specifications:
Input: 44-56VDC max ; Shielded RJ-45 female;
Output: 5VDC 2.4A 12W Max.,
DC Jack: plug: 3.5mm x 1.35mm and 5.5mm x 2.1mm
Length of output cable: 19.0cm
Operating Ambient Temperature: -10 to 45℃
Regulatory IEEE 802.3af
What is included
2x 5V PoE splitter
Note: this 5V PoE spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices.
Andreas H.
Reviewed in Germany on February 5, 2025
Zur Versorgung von nicht PoE fähigen Indoor Reolink Kameras super, Da ein 2 poliges Kabel verwendet wurde, lässt sich der Stecker auch Problemlos gegen eines passenden tauschen
Morning
Reviewed in the United States on May 28, 2024
Excellent POE splitter
Mr Techie
Reviewed in the United States on August 16, 2023
It works perfectly with my STEAMEMO PoE switch. It gets power to my Sonoff cameras via PoE! Previously, I had tried using a different *dumb* power injector/splitter, and the voltage dropped under load (e.g. when panningthe camera remotely), making it unreliable. (Note: I do NOT recommend the cheap Sonoff cameras except possibly as a cheap interim solution. The quality is poor and the pairing is atrocious -- you will pull your hair out!) For Blue Iris / NVR, do yourself a favor: get a standard PoE IP camera such as Amcrest!)Recommended!
FC3S
Reviewed in Japan on June 24, 2023
会社でPitTouchに使用しました。1年使ってますが問題ありません。純正できちんとしたものをラインナップしてくれれば良いのですが。
Kunde
Reviewed in Germany on November 24, 2023
Artikel ist wie beschrieben. Bin sehr zufrieden
Tony O'Mary
Reviewed in the United States on March 2, 2022
I've tried using these with my finestra helium miners. They will provide power to the gateways but do not transmit data.
Ian B
Reviewed in the United States on March 12, 2021
Converts 802.3af PoE to 5V DC, just like it says... Fair warning though: the adapter is for the less common 2.1mm center pin connector, rather than the more common 2.5mm, which is still mechanically and electrically compatible with 2.1mm center pins.
Jason Vorbeck
Reviewed in the United States on October 18, 2021
Works perfectly with Amcrest cameras requiring this voltage and connector. No problem for several months.
aznfl
Reviewed in the United States on January 30, 2021
This splitter has the correctly sized power connector and I can confirm that it works with my Amcrest IP3M-941B cam.
DANA C.
Reviewed in the United States on January 24, 2021
Perfect for my need which was some Amcrest PTZ cameras. The cameras a 5V and use 2.1mm power connector. Perfect fit and IV connected them to UniFi switches and Amcrest PoE NVRs without issue.
José A.
Reviewed in Spain on August 26, 2020
Lastima que no sea gigabit, pero funciona perfectamente para alimentar un switch donde no tenía enchufes.
Basti_1986
Reviewed in Germany on October 19, 2020
Habe einen Adapter an einer Instar Kamera und den anderen an einer Dericam Kamera, beide funktionieren ohne Probleme.
aj4mq
Reviewed in the United States on April 19, 2020
I use some of the Amcrest PTZ Cameras in places very distant from power, so this looked like a wonderful solution.. Only time will tell how well, but it has survived the first tests. Will update later this year.The smaller connector is exactly the size of most 5V connectors I have seen, and fits the Amcrest caamera perfectly, and has an adapter that goes to the standard laptop size connector from the 2000's. Exact measurements are listed.Very happy. and hope they last longer than the 5V converters we used that lasted 7 months..
Recommended Products