Your cart is empty.
Your cart is empty.Product Description
8mm-34mm Tier Tying Machine
Operation Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.
Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)
Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
Wide Application Areas
- Used in the construction market, including civil buildings, ground pipes, floor heating floor meshes, steel bars, etc.
Features
Easy to Use
This Tier Tying Machine is small in size, light in weight, easy to grasp, 3-5 times less labor-intensive than manual labor, very convenient for your use
Efficient Tool
It is a hand-held machine for packing steel bars quickly, with reasonable structure, advanced technology, simple and convenient operation, high efficiency and convenient maintenance
Operating Skills
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
Tying Wire Installations
1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
- Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.
4. Cover the plate and fasten the locking piece.
5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.
Specifications
Color:blue/orange（for choice）
Voltage: 12V
Battery: Lithium Ion Batteries
Battery Capacity: 4500mAh
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 8mm - 34mm
Knot Wire Length: 300 - 500mm
Material: Plastic + Metal
- Knot Number Per Charge: 1500 times
- Knot The Required Time: 0.8 seconds at a time
- Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.)
- Tool box size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch)
Package included:
- 1X Tying Machine
- 1X Pliers
- 1X Charger
- 1X Storage Box
- 2X Lithium Ion Batteries
- 1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)
Maintenance
1. Clean the machine regularly, keep the wire mouth clean.
2. This product can not be placed randomly, so as not to cause damage to parts.
3. Batteries must not be placed together with other metal objects to avoid short circuit.
4. Non-professional do not disassemble the machine arbitrarily, lest cause damage.
5. When you encounter an unresolved failure, please give it to the professional repair.
Confused
Reviewed in the United States on January 29, 2025
Bought two of these. They both work properly. Have run about 15 rolls of wire through each of them with no real issue.Make sure you cut the bent end off the wire when installing a new roll of wire to avoid jams. Only happened once so lesson learned.Tremendous time saver.
brandon griffin
Reviewed in the United States on August 5, 2024
It's very low quality and flimsy. But it's getting the job done. I expect it will break within a couple of days of use, but that's a worthwhile return on investment for me. The tie wire is thin and the connections are weak, but it is useful for quickly connection a bunch of rebar. I have been using it to essentially tack everything together and then going back with a manual rebar tie tool and stronger ties to hold things together more strongly. It will only connect 2 rebars that are close together. It doesn't work on 3 and it wont connect 2 parallel bars unless they are touching. We'll see how long it will hold up. I give it 3 stars because it's a cheap, disposable tool. If that's what you're expecting, then maybe it deserves 4 stars.
AJ Breu
Reviewed in the United States on July 20, 2024
Worked for about 10 minutes consistently and then turned into a dud. Don't Waste Your Time and Money!
Roberto DominguezM
Reviewed in the United States on July 2, 2024
Exactly what I needed and exceeded expectations, ties rebar really nice l,
ObscureAllure
Reviewed in the United States on December 8, 2024
It doesn’t get quite as tight as my thousand dollar one, but it’s worth two finishing spins for the price!
JAY R ALLEN NICHOLAS
Reviewed in the United States on November 21, 2024
Excelente , gracias.
inez
Reviewed in the United States on March 8, 2023
Way to many missed ties and broken knots. Not satisfied with product quality.
Edmund R. Zavada
Reviewed in the United States on October 11, 2023
Bought two of these because together they were still cheaper than even the cheapest pro-level tying machine. One broke after a few hundred ties (and just out of the return window), the other one is still going strong after a few thousands ties. Might try to fix the broken one, seems like it could be a bad capacitor (turns on but then as soon as you try to use it the motor clicks then it loses power and switches itself off). Nice that it comes with 2 batteries which makes it possible to use almost continuously.Since we are literally only using this for a single foundation job (albeit a big one), I still think it made more sense than spending $1k to $2k for just one that would last a lot longer.
Recommended Products