4040-PRO X-Axis Extension Kit, 4040 Upgrade to 6040, CNC Accessories for 4040-PRO CNC Router Machine, Extended Working Area 600 x 400mm (23.62’’ X15.75’’), 40P-XE60

The spacing of the T tracks makes SOMR common accessories a slightly awkward fit, but it's absolutely usable. Just manage expectations and check with manufacturers of gates/corner clamps to ensure a solid fit.

Si je suis livré

Very easy to install, iv upgraded all 3 of my machines with these extensions if you have a 4040. This is the upgrade to get

Love this add-on for my 4040-Pro! The extra added space is very helpful, especially when considering the space for the clamps.If I were to extend just one axis, I would extend the y-axis, so you can have both y motors working working together for the most part (set in software) and not have too much slop on the x-axis.

It's expensive for what it is but it's makes a huge difference than just using 2 15mm pieces of mdf they send out originally.Machine is now extremely sturdy and very heavy which is what you want, just wish it was little cheaper.Just a tip seal the mdf strips with clear mdf sealer before fitting so they don't get affected by humidity and should then last a long time

Produit conforme

It’s just what I needed. There was an issue, one of rage electrical connectors was crushed, I was able to repair it myself, still a bit of a let down. Also the guards were just a tad long and did not fit easily like the ones they replaced.

Kit does not include the tools needed to complete installation. It also comes with extra bolts/screws that the instructions said to keep the old ones from disassembly 🤔. Its should have extra cable ties and new rubber support pads seeing the old ones and not really usable 🤷‍♂️. Otherwise, the kit works as expected.

Shipped quickly, instructions are decent, and everything worked well with the exception of one wire being damaged. But I'm not upset at all because Sainsmart's customer service is so quick and helpful. I got the replacement wire in a few days and they even emailed me a few days after it was delivered to make sure everything worked and see how the machine is working. Highly recommend.

Update. I finally received long awaited parts but they are MISSING the knob on motor housing. Somehow the support still can’t understand everything is STUCK which is why I needed coupler/motor housing to begin with. They are screwed together. Obviously if I can’t unscrew one I can’t get to the other. Worst support ever. I have been down over 6 weeks waiting on support to send parts. ALL the parts needed.Total ofUpdate: 2 weeks waiting on parts so unable to use machine at all, to learn they are sending a part that will NOT help me since my lead screws are stuck on couplers.They are sending more couplers?? Unreal.I need 2 lead screws, 2, 8 grub nuts, 2 couplers and 2 motor housings.I am guessing they are going to want me to bang in the motor housing or put lead screws in a vice to get them unstuck. Either way support should do this not customer. Compromised integrity of lead screw.need parts NOT stuck together,This company is horrible.I am unable to use my machine at all. My coupler housing is stuck, so unable to get Motor Ends and Lead Screws to rebuild machine. The upgrade kit does not come with these very important parts, you must reuse your old. One of mine is TOO Deep in pocket Left Arm, the Right Arm is stripped out.Now if you read AHEAD towards the INSTALL instructions.... In TINY writing you can see they recommend you reinstall these with a Screw Fixing Compound.This is probably exactly what they did at the factory but failed to mention when you go to UNSCREW these. It is NOT mentioned in the REMOVAL instructions that these were put in with a screw fixing compound.I sent two emails with images to support yesterday. You must wait until middle of night for a response as they are not US Based. Instead of support telling me how to get this fixed so I can operate my machine and work, they want a PDF copy of my receipt. Typical support from this company.I am sitting with expensive pile of parts this moment. I am sure the company will make me purchase new screws and/or housing when clearly this is an issue of the factory.UPDATE 48 hours later: I still can not get Grunt nuts out, Support still has not offered a solution as to how I can get grunt nuts out. They have not even acknowledged they used glue or that they skip the instructions on how to remove them. I still can not get dimensions of couplers from support.They can help me ONLY IF my machine still in warranty. So if you are going to upgrade then do before your machine is out of warranty.Support said you can't buy replacement couplers. You must purchase entire new motors from them which I am not going to do. My machine is only 3 months old to begin with and nothing wrong with motors!I keep having to sink in money to get something else to work properly. Literally not standing behind product but opportunity to make you buy yet another replacement from them.So I had to spend another few hundred buying a grunt nut remover and several couplers to see if any will fit.I am going to send this extension kit back since I can't use it.

It removes the inherent flex from the original spoil board, so this is a win from the start.Then there's the debate of the holes versus the tracks. I don't actually use the tracks much, since I mostly use woodworker double sided tape. But I definitely prefer T Tracks over the original holes.I added a second MDF to protect the spoil board from spoiling, and to ease the use of my shorter bits.

しっかりとした作りでアルミによる強度UPがされており頑丈で変形しにくくなっています多少の重量物を載せてもたわみが出にくく精度が向上しますね