Your cart is empty.
Your cart is empty.Product Description
RP
Reviewed in the United States on February 16, 2025
This thing was a life saver! I used it to remove both front hubs on a 2wd, 2008 ford explorer and it did great. It's well made too. Just make sure to tighten your lugs down onto the bracket before you start pulling. Also, take your time working your way around the hub. My first one was severely stuck and took about 30 minutes of working my way around it before it finally popped loose. The other hub, I sprayed with penetrant and let it sit for a bit and it came out within 5 minutes.
Mary Cay Hess
Reviewed in the United States on February 10, 2025
Great tool. Makes a difficult job easy. Instead of beating out rusted bearing with a hammer this tool pulls it right out.
Kevink
Reviewed in the United States on January 26, 2025
This doesn't fit the lug pattern on a chevy 2002 2500hd 4x4 with 8 lugs. Maybe it works fine, I'll never know. Thankfully my hub came out fine without it, for once.Would be nice if there was some dimensions referenced for us to verify if it would fit. Like something to print out that has a permiter of the area that would fit, that we could hold up to out lug bolts to verify, prior to purchasing.
Jay J
Reviewed in the United States on January 22, 2025
Worked perfectly at removing hub rusted hub assembly but I only give 4 stars because of a few burrs on the metal
Timothy Olsen
Reviewed in the United States on July 9, 2024
This tool is worth it's weight in Gold! I had stuck hubs on my 08' Chevy Silverado 1500, I rust welded to the knuckle! I beat on these things for hours with a sledge hammer and soaked them in Penatration Oil, all to no-avail.and almost accepting defeat. Seen this tool and figured it was worth the $45 to try before giving the mechanic my $$. This thing peel the hubs off with an impact wrench with no problem at all. Make sure you grease the tool (i.e. threads & ball bearing) before using. If you have stuck hubs, get this thing, it will un-stick them. Impact wrench or torque bar is recommended to use. It's high quality and heavy duty metal/steel. High recommended.
Anthony B
Reviewed in the United States on December 31, 2024
Worked so good we now call it " Secret Weapon". The wheel bearings i was changing had nothing in the middle of them because the car can be 2wd or 4wd so they accept either. Because of this there was no way a regular puller would work. Saved me alot of headache. Worth every dollar
bonniey
Reviewed in the United States on December 27, 2024
I had two separate axles on my Jeep that I was trying to remove the drive shaft from and I used everything from sledgehammers to map torch to everything possible this thing literally made each hub bearing come off like butter with an impact amazing tool highly highly recommended
Adam
Reviewed in the United States on December 19, 2024
I replaced a wheel bearing a couple years ago and spent a week hammering it until it came off. Fast forward to now, the other side goes bad and it's so much worse. I couldnt budge it with my impact or the bolt trick, it snapped the hardened bolt. I was doing to use a grinding when to get it off but figured I'd buy this before, before I damage something else. This worked perfectly. Had it off in about 5 minutes. The shop wants 800 minimum to fix the bearing,bearing and this puts me at 70$
Recommended Products