Your cart is empty.
Your cart is empty.Product Description
6AN Nylon Braided Fuel Line Kit
Specification:
- Color:Black
- Size:AN-6
- Please check the working pressure and temperature of your system before purchase.
How to Cut:
- Measure your hose and find desired length.
- Tape hose at measured length needed for application.
- Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
- Remove the tape.
- Slide one end of hose into end of fitting.
- Insert the other half of fitting into the hose and begin to push and screw the fitting together.
- Make sure all connection are tight.
Package Include:
- 1 pcs AN-6 Nylon Braided Hose
- 4 pcs AN-6 Straight Reusable Swivel Hose End
- 2 pcs AN-6 45 Degree Reusable Swivel Hose End
- 2 pcs AN-6 90 Degree Reusable Swivel Hose End
- 2 pcs AN-6 180 Degree Reusable Swivel Hose End
- 6 pcs 6AN Hose Separator Clamp
- 2 pcs 6AN Male Coupler
USEFUL PARAMETER
- Working Temperature: -40 F to 248 F(-40°C to +120°C) under most operating.
- Working Pressure:500 PSI.
100% HIGH QUALITY MATERIAL
- Inner hose Materail:Polyurethane material hose
- Outside Materail:Nylon and Stainless Steel
- Fitting Material: High Quality 6061 Aluminum Alloy
EFFECTIVELY APPLICATION
- The fuel line hose is capable of handling nearly every plumbing task on your car.
- The 6an fitting can be reused.
- Use for fuel line, oil hose, brake line, water pipe, gas line and so on.
tony brindle
Reviewed in the United States on February 22, 2025
everything works grate no leaks
Aero Maus
Reviewed in the United States on September 24, 2024
I’m using this kit to plumb an external full-flow oil filter on my VW baja bug. The included instructions are for a different type of fitting. So you’d better know what you’re doing or get someone else to help you.
TiTaN-1
Reviewed in the United States on July 25, 2024
worked good for a few months then started leaking on the 90degree fittings. the straigt fittings work great.. not so much on the angled fittings
Kevin s.
Reviewed in the United States on July 18, 2024
These look high quality don't leak are excellent for the money install easily and fit properly on my hot rod.
Hotty Motty
Reviewed in the United States on September 6, 2022
Everything worked out fine from this kit. I did not use the clamp mounts.
B.
Reviewed in the United States on June 21, 2022
Fittings use o rings, so they never pull up tight. They have to sit just right to not leak. The o rings also get pinched because the fittings will move around (because they don’t pull up tight) and come apart, and if you’ve got these after a filter and you’re running a carb, the pieces will stick your needle and seat open, causing massive flooding issues. The line also decided to split open internally after 10 months, and this was used as a low pressure return line. Do not risk your ride by running this trash!
miguel irizarry
Reviewed in the United States on July 29, 2021
Nice
Dustin Alan lawson
Reviewed in the United States on March 7, 2021
Only in use for about 30 minutes and the fitting came apart
Recommended Products