Your cart is empty.
Your cart is empty.Product Description
Packing List
- 30CM Bar*1
- Alloy Clamp*2
- Anti-slip Spacer*2
- Allen Key Wrench*1
Specifications:
- Condition: Brand new
- Material: Aluminum Alloy
- Color: Black
- Clamp diameter: 20mm-32mm
- Tube diameter: 22.2mm, Length: 300mm
- Suitable for 20mm-32mm caliber handlebar(with anti-slip skin)
- Super longer/extended tube can assemble more items such as light/bicycle computer/phone/bell holder etc.
Installation Steps
1.
Check the accessories.
2.
Loosen the screws on the side of the extension frame with the supplied Allen key.
3.
Put the handle into the clamp, adjust the angle and distance of the two clamps.
4.
Tighten the screws
5.
Unscrew the screw on the other side of the clamps.
6.
Match the non-slip leather with the clip and install it on the handlebar of the bicycle.
7.
Install the anti-skid leather and clip on the handlebar of the bicycle, adjust the angle and distance.
PS:If the non-slip leather is too long, you can cut it short with scissors
8.
Tighten the screws.
9.
Installation is complete, you already have more space
Carolyn Morrison
Reviewed in Canada on February 5, 2025
Easy to install
William Grandon
Reviewed in the United States on September 4, 2024
I bought this for my electric scooter and it works great. I use it for a phone mount. My wife and I ride around on our scooters sometimes and play Pokémon GO. Having the phone mounted makes it easy to stop and spin the stops or even catch Pokémon.
Chad
Reviewed in the United States on September 21, 2024
Fit the bars as specified.
Anonyme
Reviewed in Canada on August 28, 2024
I’ve been searching for a solution to carry more stuff on my handlebar for the last year. That product fits perfectly and allows me to add a bag without having his weight pushing against my brake cables. Thank you very much for that product. It feels solid and resistant. I’ll be testing it for the next few months to see if it holds.
Bill Cox
Reviewed in the United States on August 19, 2024
Was hard to find this one that would reach out past or above me LED display, which would be hard to relocate. This clears the LED display, and with the bar's length of 11 7/8" there's plenty of room for the double headlights I'm going to be ordering now. Well made, and solid.
Kevin Buchanan
Reviewed in the United States on December 8, 2024
Adds more space for phone holder and speaker.
Martin
Reviewed in the United States on December 27, 2024
Extending my handle bars allowed mo mirror to extend beyond where my body obstructed the view. I was able to place the mirror several key inches to the left which allowed me to see traffic coming up behind me!
DAN
Reviewed in Canada on November 8, 2024
NICE FOR ADDING MORE ACCESSORIES TO MY BICYCLE HANDLEBAR.
Buster Brown
Reviewed in the United States on September 26, 2023
I bought this because there simply wasn't enough room on my eBike bar to mount a phone mount and rearview mirror. Thought it would solve the problem. I looked for one with the maximum stand off distance, but it's still only a few inches away from main handlebar, which lead to a lot of crowding, with phone blocking ebike display, etc.Tried moving display to this auxiliary bar and had to wrap it with several layers of strips of inner tube to get it large enough to fit tight, and that was an ordeal. Only to find that this bar was crooked due to the angle of the main bar where it was attached. Bottom line is that I returned display to center of main bars where it had been and slide this aux bar out to one side so mirror would function,and mounted phone holder on top bar, though I have to tilt it up a bit for the display to be entirely visible.It was either get this secondary bar, or go with a higher rise bar, but wasn't comfortable in how to change grips, throttle, brakes, controllers, etc from old bar to new.The quality of this is less than high end, but for it's purpose, it's fine. I was able to tighten all bolts on it very tight without issue. I was able to move it slightly after a few rides and really cranked it down so it's solid now.A good product to solve crowding problems on bars, but the stand off of the legs are shorter than I would have hoped. (though others aren't even as long as this model.)
cgrahams
Reviewed in Canada on September 14, 2023
Working fine. I have trouble imagining breaking the bar like some people have mentioned. They're not meant to be used as handlebars for your hands! It totally feels stout enough to have a handle bar bag on though. I have a phone with a quad lock mount, a bluetooth speaker and light on mine and am not experiencing any slippage yet. YMMV 😂
Kelly
Reviewed in the United States on August 1, 2023
I have short arms and it was putting a lot of strain on my back to reach the handlebars on my spin bike, so I was looking for something to extend them. The only option for a spin bike I saw was very expensive, but when I saw this I thought, this might work! It did! Took about 3 min to install for my purposes and doesn’t move at all even with pressure. It makes my rides much more comfortable!
rol
Reviewed in Canada on June 6, 2023
This tightens down very nicely to my handle bar...not sure what some were complaining about unless they had bars too narrow?? Appears solid and yet lite. No problems with items holding on to this either.
Jim Turney
Reviewed in the United States on January 20, 2023
The diameter of the mounting rod is .86” or about 22 mm which is too small for many attachments even after adding the gasket that comes with the attachment for use with smaller handlebars. Other than that this is just what I wanted. I wish someone made a 1” or 1.25”diameter rod (typical diameter of bike handlebars) but obviously some sellers have detected this incompatibility there are gaskets for sale here that should allow these attachments to be mounted on this rod, but that adds another $8-10 to the cost.
Recommended Products