Your cart is empty.
Your cart is empty.Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
John
Reviewed in Canada on January 27, 2024
Easy to install, fits perfectly 2011 toyota corolla CE 1.8L
James Howard
Reviewed in the United States on August 13, 2023
Dropped right in no problem
Customer
Reviewed in Canada on October 21, 2023
Worked great for a 2012 Toyota Corolla. Used this at the rear where the straight pipe connects to the muffler.
Richard Langis Jr.
Reviewed in the United States on August 31, 2022
This was an adventure. The exhaust on my OB was kludged up by a PO, and so I had to figure out what was what and what parts would work. I got this, the 35412, and the 31884 to put everything back together.
Zach88
Reviewed in Canada on June 25, 2022
So far so good. No leaks and it fit like a glove.-Honda Del Sol with D16Z6
David Beaulieu
Reviewed in Canada on November 16, 2022
WENT WITH THE MUFFLER I BOUGHT OFF AMAZON, EXC FIT.
Jacob O.
Reviewed in the United States on January 13, 2020
The original gasket in my exhaust system deteriorated and ultimately fell apart (who knows where), gushing exhaust fumes under the passenger compartment of my 1999 Subaru Outback. The chain store where I take my car for oil changes wanted to replace my catalytic converter ($600 quote) due to significant rust of the flange where it connects to the rest of the exhaust system. I figured I would try replacing the gasket (and the spring and bolt kit while I was at it) instead to see if I could squeeze another few years out of the car before I replace it. The hardest part of the job was extracting the old, rusted spring bolts. The gasket itself went right in and sealed nicely when I tightened the bolts. No more exhaust leak!
wade daniels
Reviewed in the United States on October 25, 2019
Slipped onto flange and fit perfect. Seems to be holding good. Last cheap one I purchased lasted a week.
Evan
Reviewed in the United States on December 22, 2017
Used it to replace the one that rotted away in my 04 Impreza Outback Sport. Fit fine in the OEM exhaust. There will probably be some of the old gasket left behind, I used a stubby flat head to scrape it out and I put a ring of heat resistant silicone around the gasket before final installation. Car is way quieter now.
garth
Reviewed in Canada on September 26, 2015
What can you say, it's a gasket. Came in good condition.
Daniel O'Brien
Reviewed in the United States on June 3, 2015
Not the gasket in picture. Was solid with gloss finish. It did fit my Subaru but not without some coaxing
Bhintx
Reviewed in the United States on January 3, 2014
This is listed as fitting the Forester XT (turbo) however that is not the case. Its much too small, I believe this is a common mistake as the exhaust shop I ended up taking my car to had to try 3 times before getting the right size from a local supply shop. The quality is great so I'm giving the product 5 stars. However, I was disappointed that Amazon showed it as fitting my car it only fits naturally aspirated foresters, not the turbo models.
SMRY
Reviewed in the United States on June 28, 2013
I purchased this Seal for my early 02 Subaru Forester. I needed an entire exhaust system from just behind the Cat ConverterShipping was very quick & in great shape 3-days to my door & that was using the standard method 5/8 days free shipping.The repair took roughly 45mins to an hour as I also took the time to paint the new parts with BBQ Hi-Heat blackin an effort to prolong the life of the exhaust. Plan that your going to break the bolts at the back of the converter& the resonator flanges not to worry if you order the following parts you'll be in great shape.List of Walker parts used found here at Amazon to complete this very quick repair.31357-Gasket (Cat Converter To Resonator Flange)35129-Spring/Bolt kit55231-Resonator31388-Gasket (Resonator to Muffler Flange)54315-Muffer (Stainless Quiet-Flow)35959-Exhaust Sealing Compound35725-Insulator x4 (I ordered to be safe may not need these 4-insulators just like me, as, I found all 4 of mine in great shape)Side note you will need to visit either your local hardware or auto parts store for 2 Nuts & Bolts (1/2inch Bolt 1.5inch long)to connect the Resonator to Muffler flangeAlso whiles I was at the hardware store I picked-up a pair of nuts having washers machined on them to replace the 2 nuts that came with the Spring/Bolt kit thus matching the original Subaru assemblyYou will notice the hangers on the new parts are solid rods unlike the Subaru hangers whiles looking very different are welded on & at the correct positions to work withboth the original 4-insulators or new if you decide to replace the 4-insulators.
Recommended Products
