Shopping Cart

Your cart is empty.

Your cart is empty.

Urethane Bandsaw Tires 10 inch x 7/8 inch x .095 inch 2 Pack for most 10' Band Saws No Adhesive Needed Phoenix goods

5.0 (11) Write Review
Free shipping on orders over $29.99

$18.86

$ 7 .99 $7.99

In Stock
  • Urethane Band saw Tires 10 inch x 7/8 inch x .095 inch, 2 pack, They can be installed on most 10″ band saw that requires a 7/8″ wide and 3/32″ thick tire.
  • Longer belt life – Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime.
  • Fast, easy installation –no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary.
  • 10" x 7/8" x .095" Tire fits for any band saw that needs a 10" x 7/8" x .095" tire. Before you buy, measure exactly whether your original bandsaw tire is this size
  • The surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency.


Urethane Bandsaw Tires 10 inch x 7/8 inch x .095 inch, 2 pack, Before you buy, measure exactly whether your original bandsaw tire is this size

How to install

First, After disassembling old "tires", clean up the gummy debris left on the wheels.

Mounting:

Used a clamp to hold the tire on the wheel in one spot, and then used a screwdriver to pry the rest of the tire on. This made installation relatively easy

Uniform stretch:

After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim. Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel.

Seating the tire:

Next, made sure the tires were properly seated in the groove on the wheels, rolled the wheel on a concrete floor, pushing down pretty hard with your hands, so the concrete would forced the tire into the groove.

After mounting, reinstalled the wheels and readjusted everything, finish!

✅Urethane band saw tires no adhesive needed, but need to be stretched on. If your new band saw tire is too tight to fit onto the wheel, submerged the new tire under hot water for a few minutes, this will make things easier.


jack c.
Reviewed in the United States on August 15, 2023
Amazon delivered these about a month ago. I finally got a chance to put them on. I think the key is is to take the wheels off at least on my meat saw. Did they slide right on well heck no 😳🤣. I put them in the sink full of hot water. Put it on about 3/4 of the way and clamped it so it wouldn't come off... Then I pried the rest on to the wheel. Good and tight that's what you want!
Helene Miller
Reviewed in the United States on August 11, 2023
Works perfectly. Easiest to take wheels off and put on belts and tight. Works on 10" Tackforce band saw
Customer
Reviewed in the United States on February 17, 2023
Decent product for the price
Philip H
Reviewed in the United States on August 5, 2022
These look great and fit the diameter of my Rikon 10-305, but were too wide. It took me a while to trim them to the correct width. Trimming was harder that I expected. Hopefully they won't fray or split due to my handiwork.If you have a Rikon 10-305 and don't mind spending time trimming these, they're a good buy. Otherwise you may want to spend a little extra $$ and get bandsaw tires that are pre-trimmed for the 10-305.
F.
Reviewed in Canada on September 12, 2021
Excellent and now I am happily working on my hobbies again.
Ron J.
Reviewed in Canada on July 27, 2021
it turned my bandsaw into like a new one. the bladses stay on
XX-MAN
Reviewed in the United States on March 14, 2021
Good tire belt. Works well.
Gary Weatherly
Reviewed in the United States on February 27, 2021
Product was exactly what I wanted.
j1355
Reviewed in the United States on November 5, 2021
They went on without having to glue... I have an old 1950s Montgomery Wards saw now working as it did when new...
Dad 'O' Three
Reviewed in the United States on November 15, 2021
Great product but a pain to get on. The trick I found is counter intuitive buts works great. Start by placing the tire on the FRONT lip and then slip it on. If you start by trying to put the tire on the back lip first, it slips off towards you every time. The front lip first and then work it on to the back and it won’t slip off.
Tom B
Reviewed in Canada on April 26, 2021
Bands were a little too wide but easy to cut for width. Fit well